You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Tunable Laser Radar Source

    SBC: Aculight Corporation            Topic: N/A

    Aculight proposes the development of a frequency tunable source suitable for LADAR measurements from compact military platforms. The source will use a fixed frequency diode pumped solid state drive laser and an optical parametric oscillator, tunable from 1.6 to 2.4 microns. Output energies will be over 100 micro-J through the spectral range at pulse rates of 10kHz. The major technical challenge, ...

    SBIR Phase II 1996 Department of DefenseAir Force
  2. 1-3 Micron Tunable Diode Pumped Solid State Laser Sources

    SBC: Aculight Corporation            Topic: N/A

    High pulse energy, high repetition rate, tunable, narrowband sources are needed for optical pumping of mid-infrared gas laser converters. The source needs continuous tunability over the 1-3 micron band to access different overtone bands in various gaseous gain media. Due to the need for diode pumping of the source, efficiency is critical to minimizing diode costs. Our approach is efficient gene ...

    SBIR Phase II 1996 Department of DefenseAir Force
  3. Compact, High Pulse Rate, Mid-Infrared laser

    SBC: Aculight Corporation            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseNavy
  4. Diode-Pumped Cr:Lisaf Lasers For Ozone And Water Vapor Sensing Lidars

    SBC: Aculight Corporation            Topic: N/A

    N/A

    SBIR Phase II 1996 National Aeronautics and Space Administration
  5. CW Mid-Infrared Tandem OPO Source

    SBC: Aculight Corporation            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  6. Development or Adaptation of Assistive Devices, Mechanisms, Technologies, or Techniques for Individuals with Disabilities

    SBC: Adaptive Computer Systems,            Topic: N/A

    Advancements in digital signal processing (DSP) and video technology have created an opportunity to develop a low-cost system to allow people with disabilities to control a computer using head and eye movements. A software-based system would be developed to track head and eye movements at much lower cost than the hardware-based systems currently available. The processing power available on the c ...

    SBIR Phase I 1996 Department of Education
  7. Development of Smart Structures Employing Novel Melt Spun Piezoelectric Fibers

    SBC: Sensintel Inc.            Topic: N/A

    Functionally smart materials, which have to ability to perform both sensing and actuating operations, are being developed to perform many aircraft type of control events. Smart materials, fabricated suing "continuous ferroelectric fibers," are being consider for full flight control of subsonic missiles, as the servoactuator system, specifically, and for active aerodynamic surface cont ...

    SBIR Phase I 1996 Department of DefenseAir Force
  8. Liquid Rocket Engine Combustion Components Fabricated from ZrB2/BN Composite Using Electroconsolidation (TM) Rapid Densification Technique

    SBC: Sensintel Inc.            Topic: N/A

    The goal of this program is to design and fabricate selected liquid rocket engine combustion components. This goal will be accomplished by developing a low-cost, near net-shape technology for fabrication and rapid densification of ablation and oxidation-resistant LRE components for a wide variety of Air Force missions. The material which will be used for this purpose is zirconium diboride/boron ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  9. SBIR Phase I: Advanced Foamed Abrasives Honing Application

    SBC: Sensintel Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 National Science Foundation
  10. Development of an interactive virtual environment simulator for vertical aircraft signal training

    SBC: Aeromed Software, L.l.c.            Topic: N/A

    AeroMed Software, L.L.C., proposes to develop an interactive virtual environment simulator for vertical aircraft signal training. The proposed system is intended to provide Landing Signal Enlisted (LSE) trainees with a dynamic training device similar to the operational flight trainers used by aviators. Recent advances in data acquisition, signal processing and graphics software, computer process ...

    SBIR Phase I 1996 Department of DefenseNavy
US Flag An Official Website of the United States Government