You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Solid Freeform Fabrication of low cost, in situ, metallic foam components for high energy absorption applications

    SBC: Sensintel Inc.            Topic: N/A

    In the phase I program, Advanced Ceramics Research, Inc. (ACR) fabricated in situ metallic foams by using a unique water-soluble polymer blend and ACR's Extrusion Freeform Fabrication (EFF) method. When the green parts were heated for binder burnout, thebinder was found to foam and create uniform closed, high-aspect ratio porosity. The freeform fabrication also could create open porosity ranging f ...

    SBIR Phase II 2001 Department of DefenseArmy
  2. Rapid Prototyping of continuous fiber reinforced ceramic matrix composites

    SBC: Sensintel Inc.            Topic: N/A

    For propulsion related applications, materials must be able to demonstrate excellent ablation and oxidation resistance at temperature approaching 3500?C, adequate load bearing capabilities, non-catastrophic failure modes, and ability to withstand transient thermal shock. Advanced Ceramics Research, Inc. (ACR) has developed low cost, flexible-manufacturing processes for Zr & Hf-based carbon fiber r ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  3. Compliant Brush Shroud Casing Development for Aircraft Engine Compressors

    SBC: ADVANCED COMPONENTS & MATERIALS, INC.            Topic: N/A

    The proposed Phase II program will optimize the design and manufacturing process of a compliant brush shroud casing. Recent tests at Wright Laboratories with staged brush seals have demonstrated significantly increased blade to shroud rub tolerance of acompliant casing. Phase I of the program is expected to demonstrate the feasibility of two innovative brush shroud designs with lower cost and we ...

    SBIR Phase II 2001 Department of DefenseAir Force
  4. N/A

    SBC: ADVR, Inc            Topic: N/A

    N/A

    SBIR Phase II 2001 National Science Foundation
  5. Phase-locked Fiber Lasr Array

    SBC: ADVR, Inc            Topic: N/A

    The purpose of this Phase II effort is to build a rugged, compact optical phased array for coherent addition of laser beams, a crucial building block for multi-kilowatt continuous wave laser devices. This effort builds on the success of the Phase I effortwhere it was shown that an array of electro-optic waveguides in Potassium Titanyl Phosphate (KTP) could be used for phase control. The low-voltag ...

    SBIR Phase II 2001 Department of DefenseAir Force
  6. Method for Control of Biting Midges Using Odor-Baited Traps

    SBC: American Biophysics Corporation            Topic: N/A

    We propose to develop a method of trapping biting midges including Culicoides. Biting midges are economically important insect pests. Their presence in large numbers can have a detrimental impact on land development and tourism. In addition, these insects are the vector of bluetongue, an arbovirus which is transmitted in cattle and sheep during repeated blood-feeding by biting flies. Our approach ...

    SBIR Phase II 2001 Department of Agriculture
  7. Highly Monodispered MINIM Arrays for Single Electron Transistors

    SBC: AMSEN TECHNOLOGIES LLC            Topic: N/A

    As the current trends in transistor miniaturization are continued down to the molecular level ( in a dimension of tens of nanometers or less), the electronic properties of solids and solid-solid interfaces are inherently different on the nanometer level.It is becoming clear that continued increases in circuit density will require fairly dramatic changes in the way transistors are designed and ope ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  8. DEVICE FOR MEMORY DYSFUNCTION

    SBC: ARIZONA INSTITUTE FOR BIO-MEDICAL RES            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of Health and Human ServicesNational Institutes of Health
  9. A Novel Method for Fabricating Ultra Low-Cost Radial Gradient-Index Glass Rods for Optic Communication Networks

    SBC: BEAMTEK, INC.            Topic: N/A

    This SBIR Phase II project proposed to develop a new fabrication technology that would lead to ultra low-cost, high quality radial gradient refractive index (GRIN) rods, which are widely used in fiber optic communications. Drastic cost reduction isexpected because several cost and labor intensive manufacturing processes will be eliminated, the product yield will be increased significantly compare ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  10. Device for Rapid Screening of Plasma Homocysteine

    SBC: Bioanalytical Systems, Inc.            Topic: N/A

    DESCRIPTION: (Applicant's abstract) The objective of the proposed work is fast, sensitive integrated clinical analyzers for the diagnosis of two metabolism disorders, homocysteinuria and phenylketonuria (PKU). The assays are based on microchip capillary electrophoresis with electrochemical detection. This format has several advantages, including small sample requirements, ...

    SBIR Phase II 2001 Department of Health and Human ServicesNational Institutes of Health
US Flag An Official Website of the United States Government