Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Nanomachine Device for Semiconductor Process Control Monitoring

    SBC: Xallent LLC            Topic: None

    Conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control and failure analysis. An increasing number of subtle defects become prominent drivers of failure as device size and operating margins decrease, e.g., processing anomalies in thin gate oxides, substrate problems related to do ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Using MISSE-FF to Determine the Effect of the Space Environment on Advanced Thermal Protection Coatings

    SBC: Geoplasma, LLC            Topic: Z4

    Thermal Protection Systems (TPS) are needed to protect spacecraft and crew from high temperature propellant gases, heating from solar radiation, and heating from friction with planetary atmospheres.nbsp; For example, ceramic based Thermal Barrier Coatings (TBC) are being applied to rocket engine components such as combustion chambers, injector face plates, and nozzle extensions to allow higher tem ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  3. An Intelligent Framework to Develop Adaptive Parametric Reduced Order Model Database for Aerostructural Control

    SBC: CFD Research Corporation            Topic: A1

    The goal of the project is to develop an intelligent framework to construct adaptive parametric reduced order model (PROM) database for aeroservoelastic (ASE) analysis and aerostructural control. In Phase 1, the framework for both equation-based and data-driven PROMs was developed and feasibility to introduce ldquo;engineering intelligencerdquo; to AE/ASE ROMs was successfully established. Careful ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  4. Tunable Single Frequency UV Laser

    SBC: AdValue Photonics Inc            Topic: S1

    Compact and rugged single-frequency pulsed UV lasers are needed for measurement of ozone and the hydroxyl radicals (OH). The determination of the concentration of OH in the atmosphere is central to the understanding of atmospheric photochemistry. The goal for this SBIR Phase program is to demonstrate and build a highly robust high-power fast-tuning single frequency pulsed UV laser near 308nm for O ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  5. Space Durability Testing via MISSE-FF of CORIN XLS Polyimide with Increased Flexibility and Tear Resistance

    SBC: Nexolve Holding Company, LLC            Topic: Z4

    A new thin-film polymer material is proposed that would improve orbit lifetimenbsp;and packaging efficiency for use in Low Earth Orbit (LEO) and Micro-Meteoroid and Orbital Debris (MMOD) prone applications.nbsp; Thin-film polymers are used in many spacecraft applications including multi-layer insulation, sunshields for thermal control, deployable structures, solar sails, as well as flexible solar ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  6. Discrete Time State-Space Aeroservoelastic Modeling using FUN3D

    SBC: Zona Technology, Inc            Topic: A1

    The overall technical objective of the Phase II effort is to make OVERFUN as a fully multi-functional aeroelastic software system that can establish either the discrete time state-space plant model or the frequency-domain aeroelastic equation of motion with three embedded unsteady aerodynamic sub-systems; due to the structural deformation, the control surface deflection and the discrete gust excit ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  7. Condensate Separator for MIcrogravity Conditions (COSMIC)

    SBC: Paragon Space Development Corporation            Topic: Z2

    The Paragon COndensate Separator for Microgravity Conditions (COSMIC) is a full flow device that separates liquid condensate from air using an inertial process with lownbsp;power draw, negligible pressure drop, and efficient condensate collection.nbsp; COSMIC, and associated systems in development by Paragon, form a drop-in solution to replace the ISS Common Cabin Air Assembly (CCAA) Compact Heat ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  8. Safe, High Energy Batteries for Space Suits

    SBC: NOHMS Technologies, Inc.            Topic: H4

    NASA requires breakthrough battery cell technologies that are much safer than current state-of-the-art lithium-ion cell technologies in order to achieve NASAs far-term energy storage goals for human and robotic missions. A new generation of spacesuits is needed to support EVAs for future surface exploration missions. These new suits will require decreased mass and volume, improved functionality, a ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  9. Packaging and Manufacturing Processes to Enable Production of Very Large Solar Sails for Next Generation Missions

    SBC: Nexolve Holding Company, LLC            Topic: Z10

    The experience of building the NEA Scout solar Sail resulted in the realization that new manufacturing technology would be required to build solar sails significantly larger than NEA Scout. During Phase I, NeXolve successfully developed and demonstrated fab and fold processes and scalable-modular pathfinder mechanisms that can be fully developed to support fabrication and packaging of larger solar ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  10. IF Conversion System for High-Bandwidth Multiplexed Sensors Arrays

    SBC: Alphacore, Inc.            Topic: None

    Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for Phase II of NIST's 2018 soliciation for Exploratory Measurement Science Topic 9.04.02.68.The proposing team has already successfully developed and evaluated a prototype board in Phase I.The goal in Phase II is therefore to achieve three primary objectives:1) Optimize the design ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government