You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. A Novel, Nanostructured, Metal-organic Framework-Based Pretreatment Technology for the Remediation of PFAS in Industrial Wastewater

    SBC: Framergy, Inc.            Topic: 19NCERP2

    Around the world communities are discovering that Per- and Polyfluoroalkyl Substances or PFAS are commonly found in the environment. Scientific studies have linked exposure to PFAS to various adverse health effects, including altered metabolism, infertility, reduced fetal growth, disruption of hormonal and immune systems. There are several ways people can be exposed to PFAS including ingesting con ...

    SBIR Phase II 2020 Environmental Protection Agency
  2. IF Conversion System for High-Bandwidth Multiplexed Sensors Arrays

    SBC: Alphacore, Inc.            Topic: None

    Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for Phase II of NIST's 2018 soliciation for Exploratory Measurement Science Topic 9.04.02.68.The proposing team has already successfully developed and evaluated a prototype board in Phase I.The goal in Phase II is therefore to achieve three primary objectives:1) Optimize the design ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  3. Green Process for Plastic Chrome

    SBC: VERGASON TECHNOLOGY, INC.            Topic: 18NCERP2

    This green approach to manufacturing plastic with decorative chrome will eliminate health and environmental hazards from the chrome electroplating process. The US and global market for decorative chrome on plastic is12 million m2/year and 84 million m2/year respectively, with 80% in automobile trim, 10% in appliances and 10% in sanitary fixtures. Without a viable commercial alternative, US provide ...

    SBIR Phase II 2019 Environmental Protection Agency
  4. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 18NCERP2

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logisticalsystem requires natural gas gathering lines, processing facilities,product storage tanks and Jots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermitte ...

    SBIR Phase II 2019 Environmental Protection Agency
  5. An Enhanced Contact Plasma Reactor: A Competitive Large Treatment Capacity Remediation Technology for PFAS Contaminated Water

    SBC: Dmax Plasma LLC            Topic: 18NCERP2

    Manufacture and disposal of poly- and perfluoroalkyl substance (PFAS) containing-products including the historical use of aqueous film forming foam (AFFF) formulations containing PFAS has resulted in PFAS contamination of numerous water supplies. Recent reports indicate the Air Force alone is expecting to spend > $2.25 billion for cleanup for PFAS-contaminated sites. Our technology, based on the g ...

    SBIR Phase II 2019 Environmental Protection Agency
  6. Parameter Development for the Scaled Manufacturing of Mycelium Bound Panels for Commercial Interior Products

    SBC: Ecovative Design Llc            Topic: 16NCER6A

    Ecovative Design uses grown mycelium structures to bind agricultural and wood byproducts into inherently nontoxic_x000D_ products containing no added urea formaldehyde or flame-retardant chemicals. This research program focuses_x000D_ on maturing mycelium technology for use in the production of large scale board products, from low density (LD) particle board to acoustic panels and thermal insulati ...

    SBIR Phase II 2018 Environmental Protection Agency
  7. HQ-55 VTOL UAS for Ship Based Operation

    SBC: Latitude Engineering, LLC            Topic: 832

    TECHNICAL ABSTRACT: The Hybrid Quadrotor concept, developed by Latitude Engineering, combines the high power density of electric motors and propellers with the high energy density of a piston engine and liquid fuel. Together, each technology enables maximum performance in HQ's two regimes of flight: the electric system is responsible for lift while hovering (high power, short endurance), and the g ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  8. High Temperature High Resolution in-situ Differential Pressure Sensor

    SBC: Innoveering, LLC            Topic: NA

    Chemical manufacturers require high accuracy/high sensitivity pressure sensors to efficiently monitor the various manufacturing systems and processes in the chemical plant, to ensure any changes proceed in a safe and reliable manner, adhering to expected standards and practices. NIST also has a need for highly accurate pressure measurements, especially determining the thermo-physical properties of ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  9. Circuit board Component Recovery for Electronic Waste Reduction

    SBC: Advanced Recovery and Recycling, LLC            Topic: 14NCER1A

    Electronic Waste is the fastest growing waste stream in the US. Significant amounts are recoverable for reuse, resale, and refining for precious metals. The disassemblers send circuit boards to refiners/smelters for precious metals recovery. E-Waste disassemblers remove parts from these circuit boards, so only certain parts are smelted. As such they are the key market for our depopulator. Refiners ...

    SBIR Phase II 2016 Environmental Protection Agency
  10. Dynamic Frequency Passive Millemeter-Wave Radiometer Based on Optical Up-Conversion

    SBC: Phase Sensitive Innovations, Inc.            Topic: 94

    Passive microwave sensors aboard satellites provide valuable information regarding weather conditions by measuring atmospheric attenuation over a broad range of frequencies from 0-200 GHz. Additional ground-based sensors are desirable to provide complementary upward looking measurements that can be used to refine existing attenuation models. Operating over such a large bandwidth, however, places ...

    SBIR Phase II 2014 Department of CommerceNational Oceanic and Atmospheric Administration
US Flag An Official Website of the United States Government