Award Data

Sepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...

There continues to be a need for low cost production and shipment of fuel-grade ethanol from agricultural sources. Ethanol from agricultural sources has many advantages including developing fuel independence and significantly reducing greenhouse gases. Also, bio-ethanol has significant value as an oxygenated and octane improver. Although ethanol from agricultural sources has many advantages, th ...

Improving the quality and intensity of the x-ray beam is an important design goal for every synchrotron installation. Although small, the effects of vacuum windows on x-ray absorption and phase contrast cannot be neglected. Synchrotron x-rays have wavelengths on the order of one Angstrom (1 x 10-10m), the same order of magnitude as inter-atomic distances. These x-rays are used to study many differ ...

Conventional volatile organic compound (VOC) recovery membranes (silicone rubber) preferentially transport organics over air. Although this silicone rubber has shown some success, it is not appropriate upstream of catalytic oxidation. Catalytic oxidation requires modest increases in VOC concentration at pressure to maintain performance. This is best achieved by using a reverse separation membra ...

Diesel generator sets (gen-sets) are used routinely to supply electrical power. Hospitals, businesses, and small communities use gen-sets to help reduce costs by load leveling and provide emergency power during blackouts (either scheduled or unscheduled). Recent power outages in California have led to large increases in the purchase of gen-sets, primarily for providing emergency power. In addit ...

Ambient particulate matter (PM) mass exposure is determined by collecting the PM on a sample filter over a period of 24 hours. Because the composition of ambient PM is constantly changing, the PM mass measured using the reference method may not be representative of the PM levels in the atmosphere, primarily due to the loss of collected semi-volatile material that is present in the atmosphere duri ...

This Phase I research project involves an innovative technology for sulfur dioxide (SO2) removal from coal-burning flue gases: flue gas desulfurization (FGD) technology. The current FGD technologies are expensive and energy extensive, and they generate secondary pollution. For example, the limestone-based wet scrubber FGD system costs up to 15 percent of the total construction cost of a coal-fi ...