You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Production Methods and Software for NIST Calibration Phantoms

    SBC: SIGMA K CORP            Topic: N/A

    Magnetic Resonance Imaging data needs to be calibrated using a universal standard. NIST and the ISMRM SQRM committee have developed the NIST/NIST MR phantom. The group had two phantoms manufactured to their specifications and these phantoms have been imaged at numerous imaging facilities. Sigma-K now proposes to develop a complete manufacturing method that will produce 50 MRI phantoms. These phant ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  2. Anion Exchange Resin for Chirality-based Separation of Single-wall Carbon Nanotubes

    SBC: Sepax Technologies, Inc.            Topic: N/A

    Sepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  3. Ionomer-membrane Water Processor System Design and EDU Demonstration

    SBC: PARAGON SPACE DEVELOPMENT CORPORATION            Topic: X301

    a. Paragon Space Development Corporation¿ (Paragon) proposes to continue our investigation into the use of microporous-ionomer membrane technology to improve the robustness and effectiveness and simplify water recovery processes for space applications. Improved robustness and effectiveness will be evident through (1) reduced loading onthe downstream post processor due to the ionomer¿s unique pr ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  4. Improved Rhenium Thrust Chambers for In-Space Propulsion

    SBC: Plasma Processes, LLC            Topic: S304

    Radiation-cooled, bipropellant thrust chambers are being considered for the ascent/descent engines and reaction control systems for NASA missions such as Mars Sample Return and Orion MPCV. Currently, iridium-lined rhenium combustion chambers are the state-of-the-art for in-space engines. NASA's Advanced Materials Bipropellant Rocket (AMBR) engine, a 150-lbf iridium-rhenium chamber produced by Pla ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  5. Non-Toxic HAN Monopropellant Propulsion

    SBC: Plasma Processes, LLC            Topic: X202

    Non-toxic monopropellants have been developed that provide better performance than toxic hydrazine. Formulations based on hydroxylammonium nitrate (HAN) have superior performance as compared to hydrazine with Isp (261 seconds, 12% greater), higher density and volumetric impulse (60% greater density-impulse), lower melting point, and much lower toxicity (No self contained breathing apparatus requir ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  6. Life Science Research Sample Transfer Technology for On Orbit Analysis

    SBC: TECHSHOT, INC.            Topic: O302

    With retirement of the space shuttle program, microgravity researchers can no longer count on bringing experiment samples back to earth for post-flight analysis. Locker-sized processing facilities, which were typically transported up to and down from the International Space Station during the shuttle era, quite simply consume too much volume, mass, and power to be accommodated as part of both the ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  7. Frequency-Locked Single-Frequency Fiber Laser at 2 Micron

    SBC: ADVALUE PHOTONICS INC            Topic: S101

    Frequency-locked single-frequency 2 micron fiber laser is proposed to be used for airborne/spaceborne coherent lidar measurements, i.e., Active Sensing of CO2 Emissions over Nights, Days, and Seasons. The laser is based on our proprietary fiber technology and extensive experience in fiber laser development, which features a compact, highly stable, frequency-stabilized light source. Advanced freque ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  8. Multi-Specimen Variable-G Facility for Life and Microgravity Sciences Research

    SBC: TECHSHOT, INC.            Topic: O302

    The Multi-specimen Variable-G Facility (MVF) is a single locker sized centrifuge facility for life and microgravity sciences research on the International Space Station. The MVF is a rear breather EXPRESS Rack payload that leverages many of the existing subsystems of flight proven (STS-108) Avian Development Facility (ADF) thereby reducing costs and time to flight for new scientific capability. ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  9. Emile: The EventML Explorer

    SBC: ATC-NY INC            Topic: A120

    The protocols needed to coordinate the activities of distributed components, such as consensus algorithms, are notoriously difficult to design, implement, and verify. Abstraction is the only way to gain intellectual control over this complex problem; so ATC-NY and Cornell University have developed Event Logic, a high-level model for describing and reasoning about distributed systems, and EventML, ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  10. Predictive Gust Load Alleviation Control Using Leading Edge Stagnation Point Sensor

    SBC: ZONA TECHNOLOGY INC            Topic: A207

    ZONA Technology, Inc. proposes an R & D effort to develop a Gust Load Alleviation (GLA) control system using a novel Leading Edge Stagnation Point (LESP) sensor that has the nearly instantaneous predictive capability. The real-time gust information from the sensor will enhance the performance of the proposed GLA control system. The GLA control method we will adopt is the Generalized Predictive Con ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government