You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. IF Conversion System for High-Bandwidth Multiplexed Sensors Arrays

    SBC: ALPHACORE INC            Topic: NA

    Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for NIST’s 2018 solicitation for Exploratory Measurement Science Topic 9.04.02.68. The proposing team has already successfully developed and evaluated a similar printed-circuit board (PCB)-based system for NIST (ROACH2 BLAST-TNG, refer section 1.2). The goal in Phase I is therefo ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  2. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: SENVOL LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  3. SilverlineAN

    SBC: ATC-NY INC            Topic: A3

    Modern aircraft systems have slowly evolved towards integrated modular computing architectures that are linked to multiple external networks. These developments have introduced cyber-attack vulnerabilities which did not exist in older-generation avionics systems. To counter the emerging threats and increased vulnerabilities, an ability to comprehensively and systematically assess aviation cyberse ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  4. Low Emission Lean Fully Premixed (LFP) Injector/Combustor Development

    SBC: CFD RESEARCH CORPORATION            Topic: A1

    The overall objective of this SBIR project is the development of a novel concept for low emissions: a lean fully premixed (LFP) combustor for high overall pressure ratio small core engines. In order to achieve this major objective, a three-unit fully premixed injector has been conceptualized and proposed. Phase I scope includes design and demonstration of this injector, which will be composed of t ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. Multi-Fidelity Surrogate Modeling for Computational and Experimental Data Consolidation

    SBC: CFD RESEARCH CORPORATION            Topic: A1

    The goal of the project is to develop a mathematically rigorous, multi-fidelity surrogate modeling (MFSM) methodology to consolidate experimental and computational aerodynamic data into integrated databases with quantifiable uncertainty. The salient aspects of the proposed solution are: (1) a hierarchical MFSM formulation to encapsulate local response surface modeling, model adaptation/fusion, int ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. An Intelligent Framework to Develop Adaptive Parametric Reduced Order Model Database for Aerostructural Control

    SBC: CFD RESEARCH CORPORATION            Topic: A1

    The goal of the project is to develop an intelligent framework to construct adaptive parametric reduced order model (PROM) database for aeroservoelastic (ASE) analysis and aerostructural control. Leveraging on significant advancements by the proposing team in prior research, this Phase I effort will initiate a new frontier of ‘engineering intelligence’ to further ASE ROM development, including ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. Discrete Time State-Space Aeroservoelastic Modeling using FUN3D

    SBC: ZONA TECHNOLOGY INC            Topic: A1

    CFD-based reduced order modeling (ROM) has been an active research area, as they can be used directly with common linear flutter analysis tools. Among them, linearized reduced-order modeling approaches rely on linearization of the nonlinear unsteady aerodynamic flow equations, assuming that the amplitude of the unsteady motion is limited to small perturbations about the nonlinear steady-state flow ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. Low Profile Aerodynamic Testing Tape (LPATT)

    SBC: INTERNATIONAL ELECTRONIC MACHINES CORPORATION            Topic: A1

    Current methods for obtaining pressure profiles on airfoils require complex pressure-scanner setups, which are expensive, very time-consuming, have multiple points of potential failure, and physically change the structure/loading on a test airfoil, especially in the case of smaller airfoils. This severely reduces the frequency at which such testing can be done, and the number of airfoils on which ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  9. Strategic Technologies for Autonomy & Resilience Tools (START)

    SBC: SINGULARITY - INTELLIGENCE AMPLIFIED, LLC            Topic: H6

    Singularity - Intelligence Amplified, LLC proposes to develop a resilience toolkit enabling the planning, assessment, implementation, and utilization of resilience for future manned spaceflight and autonomous systems. The Strategic Technologies for Autonomy & Resilience Tools (START) project will demonstrate the associated technologies the company envisions integrating as a toolkit within a modula ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  10. High Temperature Oxidation Resistant Coatings Integrated with Carbon/Carbon Hot Structures

    SBC: Plasma Processes, LLC            Topic: H5

    The development of new hypersonic capabilities is important for the United States. In the near-term, application of hypersonic research and technologies is likely to be on enhanced defense systems, but this could eventually expand to include improved access to space capabilities that would directly benefit NASA. Hypersonic vehicle nose tips and leading edges require high thermal shock resistance c ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government