You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. IF Conversion System for High-Bandwidth Multiplexed Sensors Arrays

    SBC: ALPHACORE INC            Topic: NA

    Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for NIST’s 2018 solicitation for Exploratory Measurement Science Topic 9.04.02.68. The proposing team has already successfully developed and evaluated a similar printed-circuit board (PCB)-based system for NIST (ROACH2 BLAST-TNG, refer section 1.2). The goal in Phase I is therefo ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  2. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: SENVOL LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  3. XpressRules-PM: Commercial Implementation of PM/NGAC

    SBC: XpressRules LLC            Topic: NA

    New Generation Access Control (NGAC)—because of its “neutrality by design”—represents the most effective and scalable approach for deploying “smart” access control and consent solutions in large dynamic scenarios. NGAC however presents with its own problems: (1) it has miniscule recognition and uptake in the workplace, (2) it is unusable by non-technical policy officers and (3) its doc ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  4. A Location-based Weather Threat Tracking and Notification System

    SBC: CFD RESEARCH CORPORATION            Topic: 834

    TECHNICAL ABSTRACT: CFDRC proposes the creation of an innovative location-based threat tracking and notification system to allow users to receive hazardous weather messages from the NWS with their call to action, allow users to receive custom-tailored messages about threats, and visualize relevant weather information within their area. The focus is on a tool that allows this information to be comm ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  5. A Blubber- or Dorsal Fin-Piercing Tag Attachment System for Remotely-Deployed Cetacean Tags

    SBC: American Benchmark Machine Works            Topic: 824

    TECHNICAL ABSTRACT: Animal-borne electronic instruments (tags) are critical tools for monitoring the behavior and ecology of cetaceans, providing data needed for managing their populations and mitigating the threats they face. Although remote-deployment of tags onto cetaceans that cannot be captured has provided valuable data, attachment durations have been frustratingly short and variable. Our Ph ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  6. HQ-55 VTOL UAS for Ship Based Operation

    SBC: Latitude Engineering, LLC            Topic: 832

    TECHNICAL ABSTRACT: The Hybrid Quadrotor concept, developed by Latitude Engineering, combines the high power density of electric motors and propellers with the high energy density of a piston engine and liquid fuel. Together, each technology enables maximum performance in HQ's two regimes of flight: the electric system is responsible for lift while hovering (high power, short endurance), and the g ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  7. Anion Exchange Resin for Chirality-based Separation of Single-wall Carbon Nanotubes

    SBC: Sepax Technologies, Inc.            Topic: N/A

    Sepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  8. High Power Single Frequency Source for Cavity Ring-Down Spectroscopy

    SBC: Aculight Corporation            Topic: N/A

    NIST is using a sensitive optical technique called cavity ring-down detection to permit detection of impurities in semiconductor process gases, which cause substantial losses in manufacturing yield. In order to increase the sensitivity and range of application of this technique, improved single frequency laser sources are required. In particular, lasers providing more power, narrower line-width, b ...

    SBIR Phase II 2004 Department of CommerceNational Institute of Standards and Technology
  9. Credential Management

    SBC: ECleide (VKD Shoppe, Inc.)            Topic: N/A

    The ability to electronically identify users and their devices is increasingly becoming an integral part of our interaction with computing platforms. Whether an operating system is contacting the manufacturer's web site to confirm its proper registration and payment today, or a cell phone is broadcasting entrance credentials to a secure physical site tomorrow, it is apparent that identifying infor ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  10. Ontology based Computational Tools for Distributed CAD

    SBC: Lateral Eye, Inc.            Topic: N/A

    CAD CAM technologies have had an immense impact on the product development process in the last two decades. Current technologies, however, have limited knowledge representation and computational capabilities to enable collaboration of design decisions beyond commercial Internet based collaboration tools. In the Phase 1 Lateral Eye proposes to develop a new framework for Knowledge Integrated comput ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government