You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. IF Conversion System for High-Bandwidth Multiplexed Sensors Arrays

    SBC: ALPHACORE INC            Topic: NA

    Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for NIST’s 2018 solicitation for Exploratory Measurement Science Topic 9.04.02.68. The proposing team has already successfully developed and evaluated a similar printed-circuit board (PCB)-based system for NIST (ROACH2 BLAST-TNG, refer section 1.2). The goal in Phase I is therefo ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  2. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: SENVOL LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  3. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  4. A Location-based Weather Threat Tracking and Notification System

    SBC: CFD RESEARCH CORPORATION            Topic: 834

    TECHNICAL ABSTRACT: CFDRC proposes the creation of an innovative location-based threat tracking and notification system to allow users to receive hazardous weather messages from the NWS with their call to action, allow users to receive custom-tailored messages about threats, and visualize relevant weather information within their area. The focus is on a tool that allows this information to be comm ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  5. HQ-55 VTOL UAS for Ship Based Operation

    SBC: Latitude Engineering, LLC            Topic: 832

    TECHNICAL ABSTRACT: The Hybrid Quadrotor concept, developed by Latitude Engineering, combines the high power density of electric motors and propellers with the high energy density of a piston engine and liquid fuel. Together, each technology enables maximum performance in HQ's two regimes of flight: the electric system is responsible for lift while hovering (high power, short endurance), and the g ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Combined Extinction/Flourescence Absorption Diagnostics for Pharmaceutical Sprays

    SBC: En'urga Inc.            Topic: 9030163R

    This Phase I project will evaluate the feasibility of a pharmaceutical spray quality audit system. The spray quality audit system will estimate the mass distribution of active ingredients and droplet sizes in pharmaceutical sprays using combined fluorescence absorption and light extinction tomography. En’Urga will modify an existing instrument to simultaneously obtain full volume fluorescence ab ...

    SBIR Phase I 2014 Department of CommerceNational Institute of Standards and Technology
  7. Production of NIST/UCSF Breast Phantom for Magnetic Resonance Imagaing (MRI)

    SBC: Phantom Laboratory            Topic: N/A

    his project involves the commercialization of the breast phantom designed by NIST and University of California, San Francisco (UCSF) for quantitative magnetic resonance imaging (MRI). The breast phantom consists of two independent phantoms, one focused on diffusion MRI measurements and the other focused on accurate measurements of fat and fibroglandular tissue properties. The proposed phantom is o ...

    SBIR Phase I 2014 Department of CommerceNational Institute of Standards and Technology
  8. Improving Commercial Fish Meal Free Aquaculture Diets

    SBC: Bell Aquaculture            Topic: 92

    Domestic US aquaculture is moving toward fishmeal replacement in aquafeeds with a variety of alternative protein sources including plant-based, terrestrial and marine proteins. In our Phase I work we showed the feasibility of modifying the protein quality of several alternate protein sources, specifically animal byproduct meals, and its potential significant impacts on marine fish production. Th ...

    SBIR Phase II 2014 Department of CommerceNational Oceanic and Atmospheric Administration
  9. Dynamic Frequency Passive Millemeter-Wave Radiometer Based on Optical Up-Conversion

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: 94

    Passive microwave sensors aboard satellites provide valuable information regarding weather conditions by measuring atmospheric attenuation over a broad range of frequencies from 0-200 GHz. Additional ground-based sensors are desirable to provide complementary upward looking measurements that can be used to refine existing attenuation models. Operating over such a large bandwidth, however, places ...

    SBIR Phase II 2014 Department of CommerceNational Oceanic and Atmospheric Administration
  10. Anion Exchange Resin for Chirality-based Separation of Single-wall Carbon Nanotubes

    SBC: Sepax Technologies, Inc.            Topic: N/A

    Sepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government