Award Data

Our approach utilizes a mature, portable inflatable beam shelter to house modified commercial car wash equipment operated by an automated control system. The inflatable beam shelters are currently deployed with the US Military and are commonly used as decontamination shelters for military vehicles. The commercial wash equipment is modified to withstand the caustic chemical environment necessar ...

The Phase I project seeks to develop a design basis for a firearm testing device which will provide a "virtual shooter" for the operation and measurement of handgun and ammunition performance. The reactions of real human shooters will be measured as a function of the specific firing action results of the test weapon on the human physiology. A six degree-of-freedom (6DOF) model will be developed ...

Solid-state storage media, particularly solid-state drives (SSDs), present new challenges to forensic investigation that need to be addressed. The low-level behavior of these drives is dramatically different than for mechanical hard disk drives-including what low-level data is available, how that data is obtained, and how that data is interpreted. Interpreting low-level data is a useful tool in co ...

Kappler proposes to develop a novel fabric composite that when constructed into Personal Protective Equipment (PPE) garments, provides protection to the wearer from multiple threats. The proposed research set forth by Kappler, Inc. is innovative in that it augments current Kappler base fabrics that protect from chemical, biologic, and flame hazards, but will now include protection from ballistic ...

Sepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...

ABSTRACT: The test and evaluation (T & E) of complex systems is challenging in many respects. Vast amounts of data are typically generated, which need to be transmitted, stored, and analyzed. Traditionally, such testing has been"stove-piped,"with the data in one domain collected and analyzed independently of the others. Nowadays, however, T & E activities are being integrated. And dynamical a ...

ABSTRACT: Clear Science Corp. and Princeton University propose to develop a computational framework for accurately and efficiently modeling the full set of physics associated with aircraft operations. The critical attributes of the proposed framework are accuracy, computational efficiency, and inclusiveness. More accurate computational models will support higher fidelity analysis during the air ...

ABSTRACT: ZONA proposes to develop a comprehensive virtual flight test software system by enhancing the capabilities of the ZONA's Stick-To-Stress Dynamic Flight Simulation (STS-DFS)"previously developed under AFRL contractual support. The current STS-DFS combines flight dynamic model and a nonlinear aeroelastic solver constructed based on neural net-based aerodynamic reduced order model (RO ...

ABSTRACT: We present a completely novel design for the polymer waveguide portion of the EO modulators, thereby resolving the fundamentally important low-loss coupling issue. This significantly simplified and elegant design will be fabricated by a nanoimprinting process, making use of electro-optic polymers that have been scaled-up to commercial levels. These polymers will be optimized for the t ...

ABSTRACT: Our objective is to establish a non-destructive, three-dimensional, image-based analysis protocol for inhomogeneous materials that inherently considers the heterogeneous nature of condensed matter. The process begins with a 3-D assessment of the internal material structure performed using a high-resolution micro-CT scanner. Next, reconstruction of a statistically optimal RUC will be per ...