You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Anion Exchange Resin for Chirality-based Separation of Single-wall Carbon Nanotubes

    SBC: Sepax Technologies, Inc.            Topic: N/A

    Sepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  2. Irradiated Environmental Chambers

    SBC: MEASUREMENT ANALYSIS CORPORATION            Topic: N/A

    Using a novel concept for humidity control, based on a proprietary saturated air source, MAC will construct and evaluate a prototype of an environmental chamber for use with NIST’s SPHERE UV source, in weathering or other UV degradation studies. The chamber will interface to the exit ports of the SPHERE, maintaining the material coupons, mounted in a standardized sample holder, at a programmed t ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  3. Fulcrum Biometrics' Plan for Research and Development of WS-BD Conformant Handheld Fingerprint Sensor

    SBC: Fulcrum Biometrics, LLC            Topic: N/A

    Trusted biometric validation of individual identities has never been more important. Several contributing factors are the increase in global terrorism, identity theft and the increase in legislation which are driving the accelerated adoption of biometric technology. Unfortunately, the biometrics industry has not actively responded to the changing market conditions being driven by the explosion in ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  4. A Compact, Tamper-Resistant, Portable Fingerprint Scanner

    SBC: SBG Labs            Topic: N/A

    With the growing demand for more efficient fingerprinting techniques, live scans are rapidly displacing traditional ink-based methods. Despite improvements in detector and processing technology for capturing and digitizing fingerprints, current equipment falls well short of NIST’s goal of a small, tamper-resistant, battery-powered, handheld scanner. Incumbent equipment suppliers have little comm ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  5. Novel Materials In-Situ Ablation and Thermal Sensing

    SBC: KAI, LLC            Topic: AF10BT04

    ABSTRACT: The objective of this project is to design and fabricate multi-signal in-situ ablation sensors based on an acoustic transducer system, thermal measurement system (i.e., either photonic technology or in-situ thermal sensors based on ultra small thermocouples), and fast inverse heat transfer algorithms. This project will use the following approaches: Utilize commercially available opt ...

    STTR Phase I 2012 Department of DefenseAir Force
  6. Adaptive Compressed Sensing for Mission Prioritized Data Collection and Analysis

    SBC: Leskiw Associates            Topic: AF10BT10

    ABSTRACT: The test and evaluation (T & E) of complex systems is challenging in many respects. Vast amounts of data are typically generated, which need to be transmitted, stored, and analyzed. Traditionally, such testing has been"stove-piped,"with the data in one domain collected and analyzed independently of the others. Nowadays, however, T & E activities are being integrated. And dynamical a ...

    STTR Phase I 2012 Department of DefenseAir Force
  7. Toward a Virtual Flight Test Capability

    SBC: CLEAR SCIENCE CORP            Topic: AF10BT16

    ABSTRACT: Clear Science Corp. and Princeton University propose to develop a computational framework for accurately and efficiently modeling the full set of physics associated with aircraft operations. The critical attributes of the proposed framework are accuracy, computational efficiency, and inclusiveness. More accurate computational models will support higher fidelity analysis during the air ...

    STTR Phase I 2012 Department of DefenseAir Force
  8. Stick-to-Stress Dynamic Flight Simulation for Virtual Flight Test

    SBC: ZONA TECHNOLOGY INC            Topic: AF10BT16

    ABSTRACT: ZONA proposes to develop a comprehensive virtual flight test software system by enhancing the capabilities of the ZONA's Stick-To-Stress Dynamic Flight Simulation (STS-DFS)"previously developed under AFRL contractual support. The current STS-DFS combines flight dynamic model and a nonlinear aeroelastic solver constructed based on neural net-based aerodynamic reduced order model (RO ...

    STTR Phase I 2012 Department of DefenseAir Force
  9. Advanced Antireflective Coatings for Polycarbonate Lenses

    SBC: NANOHMICS INC            Topic: AF10BT19

    ABSTRACT: Robust optical coatings are of great importance across a broad spectrum of applications. Hard, durable, stress-free coatings are needed and used in everything from ophthalmic polymers to infrared optics. One of the principal shortcomings of typical inorganic oxide, nitride, and sulfide coatings when applied to polymeric substrates is the large difference in the coefficient of thermal ...

    STTR Phase I 2012 Department of DefenseAir Force
  10. Conformal Hybrid Organic/Inorganic Antireflective Coatings

    SBC: ZT Solar, Inc            Topic: AF10BT19

    ABSTRACT: The objective of this STTR Phase I proposal is to investigate the feasibility of a hybrid organic/inorganic gradient index anti-reflective (GRIN-AR) coating on both rigid and flexible substrates, based on the resonant infrared matrix assisted pulsed laser evaporation (RIR-MAPLE) process. The hybrid organic/inorganic material approach enables both optical index control, as well as mechan ...

    STTR Phase I 2012 Department of DefenseAir Force
US Flag An Official Website of the United States Government