You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Anion Exchange Resin for Chirality-based Separation of Single-wall Carbon Nanotubes
SBC: Sepax Technologies, Inc. Topic: N/ASepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...
SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology -
High Energy Sub-100 Femtosecond Fiber Lasers at 2 Micron
SBC: ADVALUE PHOTONICS INC Topic: 15dThere is an urgent need to develop a new high-energy 2m ultrafast fiber laser system in order to achieve the optimized efficiency of the ESASE process, which is beneficial in areas ranging from atomic and molecular sciences to chemical, materials, and biological studies. To reach the mid-IR wavelengths for ESASE application, the traditional way is to shift the wavelengths of these commercially ava ...
SBIR Phase II 2012 Department of Energy -
Development of a Field Emitter Array Based High-Current Electron Injector
SBC: Advanced Energy Systems, Inc Topic: 11cAt present there exists a very significant science and technology gap for the production of photocathodes that have both high quantum efficiency (QE) and long lifetime. The National Academies has identified this as an area of critical importance to the development of high-power free-electron lasers (FEL). If the high-current electron injectors required are based on low-QE cathodes, then the requ ...
SBIR Phase I 2012 Department of Energy -
Accelerator Design that can Provide Very High Gradient with Acceleration Structures Fabricated with Integrated Circuit Technology
SBC: American Undulator As Alexander Mikhailichenko Topic: 28aThe far-term goal of this research is in development and design of accelerator able to provide & gt;1 GeV/m for electrons. This goal will be reached by usage of Si micro-structure made with Lithographic technology common in micro-circuit fabrication. To avoid heat damage of micro-structure, the laser focus swept along the accelerator micro- structure by a special electro-optical devic ...
SBIR Phase I 2012 Department of Energy -
Thin Diamond for Time-of-Flight Detectors
SBC: Applied Diamond, Inc. Topic: 35bDetectors and radiation monitors for future high energy and nuclear physics experiments must be able to withstand radiation environments several orders of magnitude harsher than those of any current device. At present, most radiation detectors are based on silicon technology, however, the practical radiation hardness limit of silicon falls far short of requirements in future high ener ...
SBIR Phase I 2012 Department of Energy -
Using ARB Biotech for H2 Generation and Efficient Commercial Wastewater Treatment
SBC: Arbsource, LLC Topic: 09eFood and beverage companies, for example breweries or confectioners, are burdened with huge costs managing wastewater totaling millions of dollars per year in operations for typical facilities. This cost is attributed to the continuous use of decades-old, high-maintenance treatment technologies commonly called activated sludge technology. This treatment strategy requires massive energy expenditure ...
SBIR Phase I 2012 Department of Energy -
Design and Development of a Low Cost, Manufacturable High Voltage Power Module for Energy Storage Systems
SBC: Arkansas Power Electronics International, Inc. Topic: 08bIn this project, APEI, Inc. will design and develop a high performance, high voltage SiC MCPM that is low cost, manufacturable, reliable and reworkable. The target utility scale energy storage applications include power conversion systems for grid-tie, solar array, wind turbine, and vehicle-to-grid to aid in load leveling, frequency control, voltage fluctuations in order to improve the overall pow ...
SBIR Phase I 2012 Department of Energy -
A Novel Composite Membrane for High Temperature Hydrogen Separation
SBC: BETTERGY CORP. Topic: 09aIncreased use of hydrogen as a fuel can provide benefits to our nations energy security, the environment and economic growth. Toward hydrogen economy, an innovation in hydrogen separation technology is needed in the production of hydrogen. Current separation technologies for industrial hydrogen production mainly include pressure swing adsorption process and the cryogenic separation process, which ...
SBIR Phase II 2012 Department of Energy -
Clean Fan Stove Combustion Technology Development
SBC: Biolite Topic: 10aThe core objective will be to demonstrate the feasibility of creating an affordable, long-lasting clean cook stove solution that delivers at least 90% emissions reduction and 50% lower fuel usage than traditional biomass stoves. Over the period 2009-2011, BioLite developed an innovative, low cost technology that uses a thermoelectric generator in combination with a fan and a unique combustion syst ...
SBIR Phase I 2012 Department of Energy -
Tools for Auto-Calibration of Building Energy Models and Predictive Control
SBC: Buildlab, LLC Topic: 02bWith rising energy costs and finite supply, Energy Conservation Measures (ECMs) are becoming increasingly important in the United States, particularly in regard to buildings, which account for 40% of the total energy used in America. Currently, energy use in buildings can be assessed through energy-modeling software during the design process or during post-occupancy once the building is commissio ...
SBIR Phase I 2012 Department of Energy