List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: 4D VALUE ADDED SOLUTIONS TEAM            Topic: DLA07001

    Through efforts on an NSF-funded project, MSOE has demonstrated the ability to produce castings at a resolution and complexity finer than known metal casting processes. The project, “Design and Fabrication of Components with Optimized Lattice Microstructures,” began in 2002 with initial efforts focused upon what casting processes were available and what would be required to produce complex la ...

    SBIR Phase I 2007 Department of DefenseDefense Logistics Agency
  2. Application Additions to the Long Range Ball Bar for Multi-axis Machine Capability Analysis

    SBC: IQL Independent Quality Labs, Inc.            Topic: DLA08001

    Testing of machine tools has been evolving for nearly 100 years. The advent of low cost computer data analysis, control and communication has allowed the design, manufacture and inspection of complex contoured surfaces. The need to ever decrease the tolerances has led to the development of machine tools which can no longer be tested with these old methods. These machines must be evaluated within ...

    SBIR Phase I 2009 Department of DefenseDefense Logistics Agency
  3. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: Benz Oil Company            Topic: DLA09001

    The majority of manufactured parts for defense system applications are machined using a lubricating cutting fluid. Field data has shown that cutting fluids not only impact tool life and piece geometry of manufactured parts, but can alter the power used by machine tools by 15% to 30%. Cutting fluid chemistry can be optimized by careful study

    SBIR Phase I 2010 Department of DefenseDefense Logistics Agency
  4. Advanced Battery Technologies and Manufacturing Process Improvements

    SBC: ESKRA TECHNICAL PRODUCTS INC            Topic: DLA122002

    Using a solvent free electrode manufacturing process, several different electrochemical couples will be tested using the C123 sized cell as the test bed. Both rechargeable and primary chemistries will be processed using the solventless electrode process that was successfully developed under a previous proof of concept BATTNET program effort. This effort will demonstrate the application of the pr ...

    SBIR Phase I 2014 Department of DefenseDefense Logistics Agency
  5. DLA152-001

    SBC: Response Technologies, LLC            Topic: DLA152001

    The DoD uses flexible fuel bladders in multiple air, ground, and sea vehicles because: 1) they easily fit into almost any space, 2) they are corrosion proof, and can often be self-sealing and explosion proof, 3) they allow for customized placement of fittings and connection points, 4) they collapse as they empty, thereby eliminating the need for venting and minimizing fuel sloshing and its associa ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  6. Ceramic Additive Manufacturing for Metal Castings

    SBC: Core Cast LLC            Topic: DLA152003

    Additive Manufacturing can be applied to realize investment casting cores and molds with cost reductions specifically applicable to shorter production runs than may be justified using traditional methods.The patent pending CoreCastTM AM process proposed herein leverages the strengths of additive manufacturing for freeform shape definition with the benefits of traditional slurry-based investment ca ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  7. High-resolution 3D Histological Tissue Reconstructions for Medical Printing

    SBC: CLARAPATH, INC.            Topic: DLA152002

    Clarapath has developed a novel high-throughput technique for gathering high-quality histopathological data at cellular resolution. Recognizing a critical gap in the available data to support the rapidly growing field of 3D bioprinting, we propose to automate our approach and optimize the resulting histopathology-based 3D models for 3D bioprinting applications. In Phase I, we will demonstrate feas ...

    SBIR Phase I 2016 Department of DefenseDefense Logistics Agency
  8. Economically Recovering Rare Earth Materials

    SBC: XYLON TECHNICAL CERAMICS INC.            Topic: DLA161003

    This Phase I SBIR Project seeks to develop methods of recycling rare earth from spent strategic materials.Rare earth materials are critical for a broad range of technologies.Important industrial sectors such as defense, manufacturing, energy, transportation,and electronics all utilize rare earth materials in abundance.There are currently a limited number of economically viable sources of rare eart ...

    SBIR Phase I 2016 Department of DefenseDefense Logistics Agency
  9. Manufacturing Improvements for DLA Lithium Batteries

    SBC: Bren-Tronics, Inc.            Topic: DLA161001

    The proposed project covers manufacturing improvements in the production of specific high volume batteries of interest to DLA as specified in their SBIR Proposal Submission Request noted above, with the exception of the PRC-154 and PLM-4 Batteries. Bren-Tronics proposes to go directly to Phase II because we have already demonstrated the feasibility of the proposed manufacturing improvements on the ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  10. Seamless Flexible Fuel Tanks- 65% TOC Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    The DoD uses flexible fuel bladders in multiple air, ground, and sea vehicles because they: 1) easily fit into almost any space, 2) are corrosion resistant, and can often be self-sealing and explosion resistant, 3) allow for customized placement of fittings and connection points, and 4) these flexible tanks can collapse as they empty, thereby reducing the need for venting and minimizing sloshing a ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government