List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. An Enhanced Contact Plasma Reactor: A Competitive Remediation Technology for Per- and Perfluoroalkyl Substance (PFAS) Contaminated Water

    SBC: Dmax Plasma LLC            Topic: 17NCER1A

    Perfluoroalkyl substances (PFASs) have received considerable attention due to their toxicity, ubiquitous presence and recalcitrance. Manufacture and disposal of PFAS-containing products has resulted in PFAS contamination of numerous water supplies. Recent reports indicate the Air Force alone is expecting to spend > $2.25 billion for cleanup for PFAS-contaminated sites. Thus, there is a huge market ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Green Process for Plastic Chrome

    SBC: VERGASON TECHNOLOGY, INC.            Topic: 17NCER5B

    This green approach to manufacturing plastic with decorative chrome will eliminate health and environmental hazards from the chrome electroplating process. The US and global market for decorative chrome on plastic is 12 million m2/year and 84 million m2/year respectively, with 80% in automobile trim, 10% in appliances and 10% in sanitary fixtures. Without a viable commercial alternative, US provid ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Parameter Development for the Scaled Manufacturing of Mycelium Bound Panels for Commercial Interior Products

    SBC: ECOVATIVE DESIGN LLC            Topic: 16NCER6A

    Ecovative Design uses grown mycelium structures to bind agricultural and wood byproducts into inherently nontoxic_x000D_ products containing no added urea formaldehyde or flame-retardant chemicals. This research program focuses_x000D_ on maturing mycelium technology for use in the production of large scale board products, from low density (LD) particle board to acoustic panels and thermal insulati ...

    SBIR Phase II 2018 Environmental Protection Agency
  4. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: Senvol LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Rotorcraft Fuel Bladder Weight and Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA182001

    Response Technologies will attempt to qualify to MIL-DTL-27422Fs phase I performance testing criteria for thefuel cell test cubes[Class BSemi rigid or self-supporting fuel construction, Type ISelf-sealing, and Protection Level CFull self-sealing against 50 caliber and partial self-sealing against 14.5 mm] .Response Technologiesuses an additive manufacturing process that initially creates a textile ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. Additively Manufactured Inflatable Hulls- Improved Survivability- 20% Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    Seam failures of flexible inflatable hulls is the primary reason for failures of military RHIBS and CRCs.These failures are a result of the current manufacturing methods being used, and which have been in place for over fifty years.Whats more, the manufacturing methods and fragmented supply chain of these hulls result in very long and unreliable lead times.These shortcomings impact the survivabili ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  7. Growth and Fungal Resin Generation for Manufacturing Novel, Formaldehyde-Free Wood Particleboard

    SBC: ECOVATIVE DESIGN LLC            Topic: 16NCER6A

    Engineered wood represents a $8.SB market in the United States annually. Resins instituted in the production of traditional engineered wood products (formaldehyde) have recently come under substantial scrutiny due to detrimental human heath effects. Ecovative is developing a drop-in replacement for engineered wood resins that is economically competitive and intrinsically safe. The mResin TM system ...

    SBIR Phase I 2017 Environmental Protection Agency
  8. Economically Recovering Rare Earth Materials

    SBC: XYLON TECHNICAL CERAMICS INC.            Topic: DLA161003

    This Phase II SBIR project seeks to develop and commercialize methods for recycling rare earth materials from strategic waste streams. Rare earth materials are critical for a broad range of technologies. Important industrial sectors such as defense, manufacturing, energy, transportation, and electronics all utilize rare earths in abundance. There are currently a limited number of economically v ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  9. Circuit board Component Recovery for Electronic Waste Reduction

    SBC: Advanced Recovery and Recycling, LLC            Topic: 14NCER1A

    Electronic Waste is the fastest growing waste stream in the US. Significant amounts are recoverable for reuse, resale, and refining for precious metals. The disassemblers send circuit boards to refiners/smelters for precious metals recovery. E-Waste disassemblers remove parts from these circuit boards, so only certain parts are smelted. As such they are the key market for our depopulator. Refiners ...

    SBIR Phase II 2016 Environmental Protection Agency
  10. High-resolution 3D Histological Tissue Reconstructions for Medical Printing

    SBC: CLARAPATH, INC.            Topic: DLA152002

    Clarapath has developed a novel high-throughput technique for gathering high-quality histopathological data at cellular resolution. Recognizing a critical gap in the available data to support the rapidly growing field of 3D bioprinting, we propose to automate our approach and optimize the resulting histopathology-based 3D models for 3D bioprinting applications. In Phase I, we will demonstrate feas ...

    SBIR Phase I 2016 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government