List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: Engineering And Software System Solutions, Inc.            Topic: DLA171002

    Maintaining the many types of weapons systems within the Department of Defense (DoD) is a tremendous task and procuring replacement components is made especially difficult due to obsolescence and often time, excessive pricing. Many components are no longer available from the Original Equipment Manufacturer (OEM) and the DoD does not have sufficient documentation to develop new suppliers. A new, s ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: DLA171002

    San Diego Composites, Inc. (SDC) will provide the Defense Logistics Agency (DLA) qualified environmentally stable composite (ESC) replacement parts as an alternative source of supply for the parts on the DLA published Land and Maritime Replenishment Parts Purchase or Borrow and Limited Source Candidate Parts lists. SDCs ESC parts can be produced up to 75% faster, require up to 98% less preventativ ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Develop Alternate Source of Supply for NSN 6130-015487556 Battery Charger

    SBC: Spectral Labs Incorporated            Topic: DLA171002

    During Phase I, Spectral labs proposes using our multi-disciplined engineering, quality assurance, and production staff to reverse engineer an NSN 6130-015487556 Battery Charger, P/N RF-5853-CH106 in order to become an approved source. We will prepare a Source Approval Request (SAR) which includes a complete Technical Data Package and Test Plans. Following established ISO 9001 certified processes, ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Increase Competition through Small Business Source Approval Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI)

    SBC: Nextgen Aeronautics, Inc.            Topic: DLA172001

    NextGen Aeronautics (NextGen) is proposing to develop and submit Source Approval Requests (SARs) to increase competition for the manufacture and delivery of Aircraft Launch and Recovery Equipment (ALRE). The DLA has identified critical ALRA NSNs that are sourced by fewer than two manufacturers, limiting availability and competition. NextGen is a proven designer/manufacturer of high-complexity part ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: Senvol LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. Logistics Augmented Reality Real-time Efficiency Enhancement System

    SBC: Intellisense Systems, Inc.            Topic: DLA181001

    To address the DLAs need for the implementation of augmented reality (AR) in DLAs procurement, logistics, and distribution processes, Intellisense Systems, Inc. (ISS) proposes to develop a new Logistics Augmented Reality Real-Time Efficiency Enhancement (LARREE) system. LARREE is based on novel ultra-low-cost infrastructure enhancements for real-time tracking, using interoperable software database ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA Nuclear Enterprise Support Office (NESO) NSN: 3950-00-869-7362

    SBC: Engineering And Software System Solutions, Inc.            Topic: DLA181003

    Critical DoD weapons systems require continuous maintenance; many of the replacement components are available from single or limited sources resulting in lengthy and expensive procurements. Although the government typically paid for the research and development of the specialized equipment often the government does not own data rights and cannot easily solicit proposals from alternate sources. Cre ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  8. Rotorcraft Fuel Bladder Weight and Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA182001

    Response Technologies will attempt to qualify to MIL-DTL-27422Fs phase I performance testing criteria for thefuel cell test cubes[Class BSemi rigid or self-supporting fuel construction, Type ISelf-sealing, and Protection Level CFull self-sealing against 50 caliber and partial self-sealing against 14.5 mm] .Response Technologiesuses an additive manufacturing process that initially creates a textile ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  9. Reverse Engineering and Manufacturing of Alternative Display Equipment

    SBC: Intellisense Systems, Inc.            Topic: DLA182004

    To address the Defense Logistics Agency (DLA)s need for KWD-ML-4-115AL alternative supply sources, Intellisense Systems, Inc. (ISI) proposes to develop a new Reverse Engineering and Manufacturing of Alternative Display Equipment (RE-MADE) process specifically to reverse engineer (RE) the KWD-ML-4-115AL display to improve product availability and increase competition. The proposed RE process is bas ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Additively Manufactured Inflatable Hulls- Improved Survivability- 20% Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    Seam failures of flexible inflatable hulls is the primary reason for failures of military RHIBS and CRCs.These failures are a result of the current manufacturing methods being used, and which have been in place for over fifty years.Whats more, the manufacturing methods and fragmented supply chain of these hulls result in very long and unreliable lead times.These shortcomings impact the survivabili ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government