List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: Senvol LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Vibrant Corporation            Topic: DLA181002

    The DLA requires a set of procedures for acceptance of repairs and replacement parts made with additive manufacturing (AM). A critical component of that acceptance procedure will be tools for monitoring and control of AM processes. Vibrant Corporation provides process monitoring and control and nondestructive evaluation (NDE) services based on its Process Compensated Resonance Testing (PCRT) techn ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Rotorcraft Fuel Bladder Weight and Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA182001

    Response Technologies will attempt to qualify to MIL-DTL-27422Fs phase I performance testing criteria for thefuel cell test cubes[Class BSemi rigid or self-supporting fuel construction, Type ISelf-sealing, and Protection Level CFull self-sealing against 50 caliber and partial self-sealing against 14.5 mm] .Response Technologiesuses an additive manufacturing process that initially creates a textile ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Additively Manufactured Inflatable Hulls- Improved Survivability- 20% Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    Seam failures of flexible inflatable hulls is the primary reason for failures of military RHIBS and CRCs.These failures are a result of the current manufacturing methods being used, and which have been in place for over fifty years.Whats more, the manufacturing methods and fragmented supply chain of these hulls result in very long and unreliable lead times.These shortcomings impact the survivabili ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  5. Detecting Substandard, Nonconforming, Improperly Processed and Counterfeit Materiel

    SBC: Vibrant Corporation            Topic: DLA15C001

    Vibrant Corporation and Sandia National Laboratories (SNL) propose to apply Process Compensated Resonance Testing (PCRT) to the DLA's need for an NDI method to detect substandard, counterfeit, nonconforming and improperly processed materiel. PCRT collects and analyzes the resonance frequencies of a component to detect structural defects, characterize material, analyze population variation, monitor ...

    STTR Phase II 2017 Department of DefenseDefense Logistics Agency
  6. Economically Recovering Rare Earth Materials

    SBC: XYLON TECHNICAL CERAMICS INC.            Topic: DLA161003

    This Phase II SBIR project seeks to develop and commercialize methods for recycling rare earth materials from strategic waste streams. Rare earth materials are critical for a broad range of technologies. Important industrial sectors such as defense, manufacturing, energy, transportation, and electronics all utilize rare earths in abundance. There are currently a limited number of economically v ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  7. High-resolution 3D Histological Tissue Reconstructions for Medical Printing

    SBC: CLARAPATH, INC.            Topic: DLA152002

    Clarapath has developed a novel high-throughput technique for gathering high-quality histopathological data at cellular resolution. Recognizing a critical gap in the available data to support the rapidly growing field of 3D bioprinting, we propose to automate our approach and optimize the resulting histopathology-based 3D models for 3D bioprinting applications. In Phase I, we will demonstrate feas ...

    SBIR Phase I 2016 Department of DefenseDefense Logistics Agency
  8. Economically Recovering Rare Earth Materials

    SBC: XYLON TECHNICAL CERAMICS INC.            Topic: DLA161003

    This Phase I SBIR Project seeks to develop methods of recycling rare earth from spent strategic materials.Rare earth materials are critical for a broad range of technologies.Important industrial sectors such as defense, manufacturing, energy, transportation,and electronics all utilize rare earth materials in abundance.There are currently a limited number of economically viable sources of rare eart ...

    SBIR Phase I 2016 Department of DefenseDefense Logistics Agency
  9. Manufacturing Improvements for DLA Lithium Batteries

    SBC: Bren-Tronics, Inc.            Topic: DLA161001

    The proposed project covers manufacturing improvements in the production of specific high volume batteries of interest to DLA as specified in their SBIR Proposal Submission Request noted above, with the exception of the PRC-154 and PLM-4 Batteries. Bren-Tronics proposes to go directly to Phase II because we have already demonstrated the feasibility of the proposed manufacturing improvements on the ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  10. Seamless Flexible Fuel Tanks- 65% TOC Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    The DoD uses flexible fuel bladders in multiple air, ground, and sea vehicles because they: 1) easily fit into almost any space, 2) are corrosion resistant, and can often be self-sealing and explosion resistant, 3) allow for customized placement of fittings and connection points, and 4) these flexible tanks can collapse as they empty, thereby reducing the need for venting and minimizing sloshing a ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government