List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Increase Competition through Small Business SAR Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI)

    SBC: Nanosonic Inc.            Topic: DLA172001

    The Defense Logistics Agency seeks improved product availability through increased competition for certain Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI).These items have National Stock Numbers (NSN) with an annual demand of > $10,000 and fewer than two manufacturers.NanoSonic is a small advanced company that specializes in innovate additive manu ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: Senvol LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Smart Baseplate for Additive Manufacturing

    SBC: Luna Innovations Incorporated            Topic: DLA18A001

    Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods.One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made.This is especially critical given the relatively long periods of time that complex parts can require ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. NanoSonic Sourcing of NSN 8010-01-266-6576 Epoxy Primer Coating

    SBC: Nanosonic Inc.            Topic: DLA181005

    Through the Defense Logistics Agency (DLA) SBIR program, NanoSonic will qualify as an Approved Source for NSN: 8010-01-266-6576 Epoxy Primer Coating DLA Supply Chain: C&E Weapon System: B-2 Part Description:MILSPEC Part Number M85582-2-C2-001P, Dark Green.During the program, NanoSonic will reproduce the primer per requisite technical information via expertise in both coating synthesis and blend co ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Rotorcraft Fuel Bladder Weight and Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA182001

    Response Technologies will attempt to qualify to MIL-DTL-27422Fs phase I performance testing criteria for thefuel cell test cubes[Class BSemi rigid or self-supporting fuel construction, Type ISelf-sealing, and Protection Level CFull self-sealing against 50 caliber and partial self-sealing against 14.5 mm] .Response Technologiesuses an additive manufacturing process that initially creates a textile ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. DLA Disposition Services Mobile Offices for Disposal Services and Customer Support

    SBC: TURNAROUND FACTOR INC            Topic: DLA162002

    The TAF Mobile Office provides DLA the functionality and comfort of an office without the burden of capital expenditures, training, and maintenance associated with custom fleet vehicles. The TAF Mobile Office is light enough to be lifted by one person and safely installs in the vehicle in under one minute. It allows DLA Disposition Services mobile workers to continue the use of GSA fleet vehicles ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  7. Additively Manufactured Inflatable Hulls- Improved Survivability- 20% Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    Seam failures of flexible inflatable hulls is the primary reason for failures of military RHIBS and CRCs.These failures are a result of the current manufacturing methods being used, and which have been in place for over fifty years.Whats more, the manufacturing methods and fragmented supply chain of these hulls result in very long and unreliable lead times.These shortcomings impact the survivabili ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  8. Facilities and Operations Procurement Supply Chain Management of NanoSonic Seals

    SBC: Nanosonic Inc.            Topic: DLA172001

    The Defense Logistics Agency (DLA) seeks improved product availability through increased competition for certain in particular for National Stock Numbers (NSN) with an annual demand of > $10,000 and fewer than two manufacturers.During Phase I, NanoSonic identified a need to investigate materials technology for improved canopy seal designs per DLA's sourcing goals. Current inflatable seals used in ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  9. DLA Disposition Services Mobile Offices for Disposal Services and Customer Support

    SBC: TURNAROUND FACTOR INC            Topic: DLA162002

    The TAF Mobile Office Module provides 4G LTE connectivity and office services needed by DLAs mobile workforce. The TAF Mobile Office Module is light enough to be lifted by one person and installs in the vehicle in under one minute. It allows DLA Disposition Services mobile workers to continue the use of GSA fleet vehicles by simply buckling in the TAF Mobile Office Module. This provides DLA the fu ...

    SBIR Phase I 2017 Department of DefenseDefense Logistics Agency
  10. Economically Recovering Rare Earth Materials

    SBC: XYLON TECHNICAL CERAMICS INC.            Topic: DLA161003

    This Phase II SBIR project seeks to develop and commercialize methods for recycling rare earth materials from strategic waste streams. Rare earth materials are critical for a broad range of technologies. Important industrial sectors such as defense, manufacturing, energy, transportation, and electronics all utilize rare earths in abundance. There are currently a limited number of economically v ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government