List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS INC.            Topic: None

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the asmanufactured material properties are not known. Attempts to predict performance o ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Nanomachine Device for Semiconductor Process Control Monitoring

    SBC: Xallent LLC            Topic: None

    Conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control and failure analysis. An increasing number of subtle defects become prominent drivers of failure as device size and operating margins decrease, e.g., processing anomalies in thin gate oxides, substrate problems related to do ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. An Enhanced Contact Plasma Reactor: A Competitive Remediation Technology for Per- and Perfluoroalkyl Substance (PFAS) Contaminated Water

    SBC: Dmax Plasma LLC            Topic: 17NCER1A

    Perfluoroalkyl substances (PFASs) have received considerable attention due to their toxicity, ubiquitous presence and recalcitrance. Manufacture and disposal of PFAS-containing products has resulted in PFAS contamination of numerous water supplies. Recent reports indicate the Air Force alone is expecting to spend > $2.25 billion for cleanup for PFAS-contaminated sites. Thus, there is a huge market ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Green Process for Plastic Chrome

    SBC: VERGASON TECHNOLOGY, INC.            Topic: 17NCER5B

    This green approach to manufacturing plastic with decorative chrome will eliminate health and environmental hazards from the chrome electroplating process. The US and global market for decorative chrome on plastic is 12 million m2/year and 84 million m2/year respectively, with 80% in automobile trim, 10% in appliances and 10% in sanitary fixtures. Without a viable commercial alternative, US provid ...

    SBIR Phase I 2018 Environmental Protection Agency
  5. Parameter Development for the Scaled Manufacturing of Mycelium Bound Panels for Commercial Interior Products

    SBC: ECOVATIVE DESIGN LLC            Topic: 16NCER6A

    Ecovative Design uses grown mycelium structures to bind agricultural and wood byproducts into inherently nontoxic_x000D_ products containing no added urea formaldehyde or flame-retardant chemicals. This research program focuses_x000D_ on maturing mycelium technology for use in the production of large scale board products, from low density (LD) particle board to acoustic panels and thermal insulati ...

    SBIR Phase II 2018 Environmental Protection Agency
  6. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: Senvol LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  7. A Location-based Weather Threat Tracking and Notification System

    SBC: CFD Research Corporation            Topic: 834

    TECHNICAL ABSTRACT: CFDRC proposes the creation of an innovative location-based threat tracking and notification system to allow users to receive hazardous weather messages from the NWS with their call to action, allow users to receive custom-tailored messages about threats, and visualize relevant weather information within their area. The focus is on a tool that allows this information to be comm ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  8. Growth and Fungal Resin Generation for Manufacturing Novel, Formaldehyde-Free Wood Particleboard

    SBC: ECOVATIVE DESIGN LLC            Topic: 16NCER6A

    Engineered wood represents a $8.SB market in the United States annually. Resins instituted in the production of traditional engineered wood products (formaldehyde) have recently come under substantial scrutiny due to detrimental human heath effects. Ecovative is developing a drop-in replacement for engineered wood resins that is economically competitive and intrinsically safe. The mResin TM system ...

    SBIR Phase I 2017 Environmental Protection Agency
  9. High Temperature High Resolution in-situ Differential Pressure Sensor

    SBC: Innoveering, LLC            Topic: NA

    Chemical manufacturers require high accuracy/high sensitivity pressure sensors to efficiently monitor the various manufacturing systems and processes in the chemical plant, to ensure any changes proceed in a safe and reliable manner, adhering to expected standards and practices. NIST also has a need for highly accurate pressure measurements, especially determining the thermo-physical properties of ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  10. Circuit board Component Recovery for Electronic Waste Reduction

    SBC: Advanced Recovery and Recycling, LLC            Topic: 14NCER1A

    Electronic Waste is the fastest growing waste stream in the US. Significant amounts are recoverable for reuse, resale, and refining for precious metals. The disassemblers send circuit boards to refiners/smelters for precious metals recovery. E-Waste disassemblers remove parts from these circuit boards, so only certain parts are smelted. As such they are the key market for our depopulator. Refiners ...

    SBIR Phase II 2016 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government