List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Compact Heat Exchanger for High Temperature High Pressure Applications Using Advanced Cermet

    SBC: Comprex, LLC            Topic: N/A

    In this proposal, CompRex, LLC (“CompRex”) seeks to realize a transformational and disruptive advancement in heat exchange technology for high temperature and high pressure applications through 1) the use of advanced metal and ceramic composite material, 2) development of a new simplified manufacturing approach, and 3) optimization of heat exchanger design to maximize the performance benefits ...

    SBIR Phase I 2019 Department of EnergyARPA-E
  2. Compact Heat Exchanger for High Temperature High Pressure Applications Using Advanced Cermet

    SBC: Comprex, LLC            Topic: N/A

    In this proposal, CompRex, LLC (“CompRex”) seeks to realize a transformational and disruptive advancement in heat exchange technology for high temperature and high pressure applications through 1) the use of advanced metal and ceramic composite material, 2) development of a new simplified manufacturing approach, and 3) optimization of heat exchanger design to maximize the performance benefits ...

    SBIR Phase II 2019 Department of EnergyARPA-E
  3. Nanomachine Device for Semiconductor Process Control Monitoring

    SBC: Xallent LLC            Topic: None

    Conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control and failure analysis. An increasing number of subtle defects become prominent drivers of failure as device size and operating margins decrease, e.g., processing anomalies in thin gate oxides, substrate problems related to do ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  4. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS INC.            Topic: None

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the asmanufactured material properties are not known. Attempts to predict performance o ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  5. Combatting potato soft rot with free-living phagocytes

    SBC: AMEBAGONE, INC.            Topic: 82

    Our need:Potatoes are the fourth most consumed crop in the world, after rice, wheat, and corn. According to 2016 data from the USDA, potatoes are also one of the most important agricultural crops in the world and are the leading vegetable produced in the USA. In 2016 alone, 44B pounds of potatoes were produced in the USA with a production value of $3.9B. Moreover, potatoes readily adapt to a wide ...

    SBIR Phase I 2018 Department of Agriculture
  6. Producing Shrimp In A Modified Partitioned Aquaculture System Using On-Shore Tanks And Earthen Ponds

    SBC: Greene Prairie Aquafarm, L.L.C.            Topic: 87

    The U.S. is the largest importer of shrimp in the world, and in order to compete with foreign imports, production efficiencies need to be drastically improved. A principle problem that affects profitability, and ultimately, sustainability of inland shrimp farming in Alabama and other regions is highly unpredictable survival. Survival can be affected by stock-out success of post larval shrimp or by ...

    SBIR Phase I 2018 Department of Agriculture
  7. Recycling Nutrients from Dairy Effluent into NOP-Compliant Agricultural Inputs

    SBC: Midwestern Bioag, Inc.            Topic: 84

    The consumer demand for organic food is growing faster than the supply. This is particularly true for large-scale row crops that go into staple foods and into animal feeds. As a result, about 80% of the primary organic grain supply is imported. Less-pronounced, but similar imbalances exist for specialty crops. Midwestern BioAg (MBA) has been supporting conventional and organic farmers for 35 years ...

    SBIR Phase II 2018 Department of Agriculture
  8. VCPR.ORG, an Internet platform for design and management of veterinary treatment protocols for livestock, and prudent use of prescription drugs

    SBC: DAIRY VETERINARIANS GROUP            Topic: 83

    Private veterinarians, most of whom work from small independent clinical practices, are a critical link in maintaining appropriate use of the antibiotics, hormones, and other pharmaceuticals that are vital to the health and welfare of livestock. VCPR.ORG will develop an Internet-based tool set designed to help veterinary practitioners serve their clients and protect public health, as well as guard ...

    SBIR Phase II 2018 Department of Agriculture
  9. Scaled Growth and Production of Mycelium Resin for Low Density Engineered Wood

    SBC: ECOVATIVE DESIGN LLC            Topic: 81

    Traditional engineered wood products, ubiquitous in our lives, are a human health hazard due to the carcinogenic nature of the binders used and lack of economical alternatives. The potential of mycelium binders as an alternative has become a primary research focus for Ecovative. Through the Phase I portion of this grant, Ecovative has identified low density (160-480 kg/m^3) engineered wood product ...

    SBIR Phase II 2018 Department of Agriculture
  10. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: Senvol LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government