List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS INC.            Topic: None

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the asmanufactured material properties are not known. Attempts to predict performance o ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Nanomachine Device for Semiconductor Process Control Monitoring

    SBC: Xallent LLC            Topic: None

    Conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control and failure analysis. An increasing number of subtle defects become prominent drivers of failure as device size and operating margins decrease, e.g., processing anomalies in thin gate oxides, substrate problems related to do ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Compact Heat Exchanger for High Temperature High Pressure Applications Using Advanced Cermet

    SBC: Comprex, LLC            Topic: N/A

    In this proposal, CompRex, LLC (“CompRex”) seeks to realize a transformational and disruptive advancement in heat exchange technology for high temperature and high pressure applications through 1) the use of advanced metal and ceramic composite material, 2) development of a new simplified manufacturing approach, and 3) optimization of heat exchanger design to maximize the performance benefits ...

    SBIR Phase I 2019 Department of EnergyARPA-E
  4. A 2-5 MW Supercritical CO2 micro tube recuperator: manufacturing, testing, and laser weld qualification

    SBC: International Mezzo Technologies, Inc.            Topic: N/A

    Mezzo and its partners will design, manufacture, and test a supercritical CO2 recuperator designed for high pressure of 275 bar and high temperature of 800 0C. The recuperator will incorporate a new manufacturing approach (laser welded micro tubes) that offers potential to reduce cost. It is well known that recuperator costs are currently very high for applications that involve high temperature an ...

    SBIR Phase I 2019 Department of EnergyARPA-E
  5. Compact Heat Exchanger for High Temperature High Pressure Applications Using Advanced Cermet

    SBC: Comprex, LLC            Topic: N/A

    In this proposal, CompRex, LLC (“CompRex”) seeks to realize a transformational and disruptive advancement in heat exchange technology for high temperature and high pressure applications through 1) the use of advanced metal and ceramic composite material, 2) development of a new simplified manufacturing approach, and 3) optimization of heat exchanger design to maximize the performance benefits ...

    SBIR Phase II 2019 Department of EnergyARPA-E
  6. A 2-5 MW Supercritical CO2 micro tube recuperator: manufacturing, testing, and laser weld qualification

    SBC: International Mezzo Technologies, Inc.            Topic: N/A

    Mezzo and its partners will design, manufacture, and test a supercritical CO2 recuperator designed for high pressure of 275 bar and high temperature of 800 0C. The recuperator will incorporate a new manufacturing approach (laser welded micro tubes) that offers potential to reduce cost. It is well known that recuperator costs are currently very high for applications that involve high temperature an ...

    SBIR Phase II 2019 Department of EnergyARPA-E
  7. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: Senvol LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  8. Adaptive Mapping of the Gulf Dead Zone with AutonomousSurface Vehicles

    SBC: Autonomous Surface Vehicles (ASV), LLC            Topic: 827

    TECHNICAL ABSTRACT: Gliders alone are incapable of monitoring the shallower regions of the hypoxic zone under conditions when the density gradient is strong, therefore surface vehicles are required to autonomously collect a suite of oceanographic observations from surface waters and profile this portion of the hypoxic zone. Autonomous Surface Vehicles, LLC (ASV, LLC) is partnering with Integral Co ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  9. A Location-based Weather Threat Tracking and Notification System

    SBC: CFD Research Corporation            Topic: 834

    TECHNICAL ABSTRACT: CFDRC proposes the creation of an innovative location-based threat tracking and notification system to allow users to receive hazardous weather messages from the NWS with their call to action, allow users to receive custom-tailored messages about threats, and visualize relevant weather information within their area. The focus is on a tool that allows this information to be comm ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  10. 1200 V SiC Based Extremely Compact, 500 kW, 2000 Hz Inverter for High Speed Permanent Magnet Synchronous Machine (PMSM) Applications

    SBC: Imagen Energy LLC            Topic: DEFOA0001736

    Imagen Energy, LLC, an innovative company which focuses on next generation SiC based power converter system, is teaming up with Wolfspeed, a division of Cree, the leading SiC power module manufacturer in the U.S, and Velicon Inc., a high speed Permanent Magnet Synchronous Machine (PMSM) supplier for special high end applications to resolve a real application issue that exists in the High Speed PMS ...

    SBIR Phase I 2018 Department of EnergyARPA-E

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government