List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS INC.            Topic: None

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the asmanufactured material properties are not known. Attempts to predict performance o ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Nanomachine Device for Semiconductor Process Control Monitoring

    SBC: Xallent LLC            Topic: None

    Conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control and failure analysis. An increasing number of subtle defects become prominent drivers of failure as device size and operating margins decrease, e.g., processing anomalies in thin gate oxides, substrate problems related to do ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: Senvol LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  4. Developing Model-Based Tools for the Design and Improvement of Manufacturing Systems

    SBC: MBSE Tools, Inc.            Topic: NA

    The vision is to create enterprise-grade software tools supporting the design and improvement of manufacturing systems, tools that can provide answers to fundamental business questions about product selection, resource planning, scheduling, and logistical control – quickly, accurately, and with adequate consideration of risk. Objectives accomplished in Phase I included adding formality and rigor ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  5. A Location-based Weather Threat Tracking and Notification System

    SBC: CFD Research Corporation            Topic: 834

    TECHNICAL ABSTRACT: CFDRC proposes the creation of an innovative location-based threat tracking and notification system to allow users to receive hazardous weather messages from the NWS with their call to action, allow users to receive custom-tailored messages about threats, and visualize relevant weather information within their area. The focus is on a tool that allows this information to be comm ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  6. A Model-Based Solution to Improve the Accessibility and Affordability of Manufacturing System Simulations

    SBC: MBSE Tools, Inc.            Topic: NA

    The vision is to provide decision-makers with effective, fast, and inexpensive analysis tools to answer "What-If" and "What-Should" questions about manufacturing systems. Value Stream Mapping (VSM) is a modeling methodology with widespread contemporary use in manufacturing, and our strategy is to start with VSM as a deployment beachhead for the eventual deployment of a more generic manufacturing s ...

    SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology
  7. High Temperature High Resolution in-situ Differential Pressure Sensor

    SBC: Innoveering, LLC            Topic: NA

    Chemical manufacturers require high accuracy/high sensitivity pressure sensors to efficiently monitor the various manufacturing systems and processes in the chemical plant, to ensure any changes proceed in a safe and reliable manner, adhering to expected standards and practices. NIST also has a need for highly accurate pressure measurements, especially determining the thermo-physical properties of ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  8. High Temperature High Resolution in-situ Differential Pressure Sensor

    SBC: Innoveering, LLC            Topic: 90105

    Chemical manufacturers require high accuracy and high sensitivity pressure sensors to efficiently monitor the various manufacturing systems and processes in the chemical plant, to ensure any changes proceed in a safe and reliable manner, adhering to expected standards and practices. In addition, NIST has a need for highly accurate absolute and differential pressure measurements, especially for det ...

    SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology
  9. A Tool for Building Semantically Interoperable Specification and Standards

    SBC: XSB INC.            Topic: 9010273R

    Standards and specifications are widely used in government and industry to define requirements for products and processes and insure interoperability, safety, and quality of industrial and domestic products. Specifications and standards documents almost always cross-reference other standards and specification. Taken together, the web of interdependent standards forms an immensely important knowled ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  10. Probabilistic subseasonal weather forecasts for the energy & agricultural sectors

    SBC: CLIMATE FORECAST APPLICATIONS NETWORK, LLC            Topic: 831C

    The proposed research addresses Climate Adaptation and Mitigation: Probability Forecasts of Business Impact Variables from CFS2 Ensembles. Climate Forecast Applications Network (CFAN) develops innovative weather and climate forecast tools that support decision-oriented solutions for our clients. The focus of this proposal is on business-relevant subseasonal forecasts for the energy and agricultura ...

    SBIR Phase I 2015 Department of CommerceNational Oceanic and Atmospheric Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government