List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS INC.            Topic: None

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the asmanufactured material properties are not known. Attempts to predict performance o ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Nanomachine Device for Semiconductor Process Control Monitoring

    SBC: Xallent LLC            Topic: None

    Conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control and failure analysis. An increasing number of subtle defects become prominent drivers of failure as device size and operating margins decrease, e.g., processing anomalies in thin gate oxides, substrate problems related to do ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: Senvol LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  4. Bottom Feeder- A Highly Maneuverable Autonomous Underwater Vehicle

    SBC: Tridentis Advanced Marine Vehicles LLC            Topic: 822

    TECHNICAL ABSTRACT: Bottom Feeder will be a highly maneuverable Autonomous Underwater Vehicle (AUV), with a tethered operations option and modular sensor bay, to support benthic optical surveys, coral reef mapping and health assessment, and be expandable for future survey operations. It will integrate a low drag hullform, a minimum of four degrees of independent motion control, a highly efficient ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  5. A Location-based Weather Threat Tracking and Notification System

    SBC: CFD Research Corporation            Topic: 834

    TECHNICAL ABSTRACT: CFDRC proposes the creation of an innovative location-based threat tracking and notification system to allow users to receive hazardous weather messages from the NWS with their call to action, allow users to receive custom-tailored messages about threats, and visualize relevant weather information within their area. The focus is on a tool that allows this information to be comm ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Camera-based Examination of Risk via Behavioral Evaluation with Remote Underwater Surveillance

    SBC: Forever Oceans Corporation            Topic: 841

    TECHNICAL ABSTRACT: Commercial marine aquaculture operators face many operational hazards including disease, predators, husbandry operations, and environmental changes. Most of theses risks are only identified with constant surveillance and physical presence at a farm site. However, human observation of risk factors is expensive, slow, and sometimes ineffective. Sensors are available to monitor in ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  7. Design of an Autonomous, Green Powered, Mobile Coastal Monitor

    SBC: Tridentis Advanced Marine Vehicles LLC            Topic: 821

    TECHNICAL ABSTRACT: The mobile coastal monitor project is designed to prove out the research done in Phase I using a Proof of Concept demonstration craft. The Proof of Concept demonstrator will be a geometrically scaled version of the craft designed during Phase I. The Phase I craft, the Advanced Coastal Monitor (ACM) was designed to use state-of-the-art green power supplies and apply them as the ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  8. High Temperature High Resolution in-situ Differential Pressure Sensor

    SBC: Innoveering, LLC            Topic: NA

    Chemical manufacturers require high accuracy/high sensitivity pressure sensors to efficiently monitor the various manufacturing systems and processes in the chemical plant, to ensure any changes proceed in a safe and reliable manner, adhering to expected standards and practices. NIST also has a need for highly accurate pressure measurements, especially determining the thermo-physical properties of ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  9. Camera-based Examination of Risk via Behavioral Evaluation with Remote Underwater Surveillance

    SBC: Forever Oceans Corporation            Topic: 841

    Commercial marine aquaculture operators face many operational hazards including disease, predators, husbandry operations, and environmental changes. Most of theses risks are only identified with constant surveillance and physical presence at a farm site. However, human observation of risk factors is expensive, slow, and sometimes ineffective. Sensors are available to monitor individual environment ...

    SBIR Phase I 2017 Department of CommerceNational Oceanic and Atmospheric Administration
  10. Tofu-tolerant mariculture: Genomics-Assisted Breeding of a High-Quality Marine Finfish for Enhanced Performance on Sustainable, Scalable Soy-based Feeds

    SBC: Kampachi Farms, LLC            Topic: 811F

    Reliance on fishmeal and fish oil is a significant constraint to aquaculture expansion in America, and globally. As U.S. marine fish farming expands, genetic improvements could increase economic performance and decrease ecological footprint. This is critically important to sustainability, scalability and profitability of the industry, and is key to attracting capital investment. Commercial opportu ...

    SBIR Phase II 2017 Department of CommerceNational Oceanic and Atmospheric Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government