List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS INC.            Topic: None

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the asmanufactured material properties are not known. Attempts to predict performance o ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Nanomachine Device for Semiconductor Process Control Monitoring

    SBC: Xallent LLC            Topic: None

    Conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control and failure analysis. An increasing number of subtle defects become prominent drivers of failure as device size and operating margins decrease, e.g., processing anomalies in thin gate oxides, substrate problems related to do ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. CSAT: A User-friendly Efficient NIST-spec Information System Development Guideline Tool

    SBC: INFOBEYOND TECHNOLOGY, LLC            Topic: None

    NIST developed risk management framework and guidelines that assist agencies to implement integrated, organization‐wide programs to manage information security risk, and further developed Cloud Security Architecture Tool (CSAT) to facilitate in this matter. However, NIST’s CSAT needs further improvement and implementation of new functions such that it can be commercialized as an Enterprise‐g ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  4. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: Senvol LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  5. Leveraging Cyber Security Framework to Identify the SP 800 53 Security and Privacy Controls for Cloud‐based Information Systems

    SBC: INFOBEYOND TECHNOLOGY, LLC            Topic: NA

    NIST developed information system risk management and guidelines that assist agencies in implementing integrated, organization‐wide programs to manage information security risk, and further developed Cloud Security Assessment Tool (CSAT) to facilitate in this matter. However, NIST’s CSAT needs further improvement and implementation of new functions such that it can be commercialized as an ente ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  6. A Location-based Weather Threat Tracking and Notification System

    SBC: CFD Research Corporation            Topic: 834

    TECHNICAL ABSTRACT: CFDRC proposes the creation of an innovative location-based threat tracking and notification system to allow users to receive hazardous weather messages from the NWS with their call to action, allow users to receive custom-tailored messages about threats, and visualize relevant weather information within their area. The focus is on a tool that allows this information to be comm ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  7. Low‐Latency High‐reliability Wireless Protocol for Advanced Manufacturing Applications

    SBC: INFOBEYOND TECHNOLOGY, LLC            Topic: NA

    Advanced manufacture requires low-latency and high-reliability wireless communications between the sensors/actuators and the central controller. However, the current wireless protocols cannot meet such stringent latency and reliability requirements. In this project, InfoBeyond advocates L2Wireless (Low-Latency High-reliability Wireless Protocol Using Cooperative Relaying and Network Coding) to add ...

    SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology
  8. High Temperature High Resolution in-situ Differential Pressure Sensor

    SBC: Innoveering, LLC            Topic: NA

    Chemical manufacturers require high accuracy/high sensitivity pressure sensors to efficiently monitor the various manufacturing systems and processes in the chemical plant, to ensure any changes proceed in a safe and reliable manner, adhering to expected standards and practices. NIST also has a need for highly accurate pressure measurements, especially determining the thermo-physical properties of ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  9. High Temperature High Resolution in-situ Differential Pressure Sensor

    SBC: Innoveering, LLC            Topic: 90105

    Chemical manufacturers require high accuracy and high sensitivity pressure sensors to efficiently monitor the various manufacturing systems and processes in the chemical plant, to ensure any changes proceed in a safe and reliable manner, adhering to expected standards and practices. In addition, NIST has a need for highly accurate absolute and differential pressure measurements, especially for det ...

    SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology
  10. Access Control Policy Tool

    SBC: INFOBEYOND TECHNOLOGY, LLC            Topic: 90302

    Access Control (AC) determines the permission of a request in attempt to access certain resources in a software system. It has been greatly used for financial, security, privacy, safety, defense, and many other applications. However, there is no commercial‐ready tool to conveniently and thoroughly compose, test, and verify the policies against potential vulnerabilities. In this project, InfoBeyo ...

    SBIR Phase II 2016 Department of CommerceNational Institute of Standards and Technology

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government