List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS INC.            Topic: None

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the asmanufactured material properties are not known. Attempts to predict performance o ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Nanomachine Device for Semiconductor Process Control Monitoring

    SBC: Xallent LLC            Topic: None

    Conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control and failure analysis. An increasing number of subtle defects become prominent drivers of failure as device size and operating margins decrease, e.g., processing anomalies in thin gate oxides, substrate problems related to do ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Developing Silicon Nanowire Sensors to Measuring Host-Cell Proteins at a Biomanufacturing Line

    SBC: Advanced Silicon Group            Topic: None

    Our biosensor is made of silicon nanowire arrays functionalized with antibodies to measure the concentration of specific proteins. In this grant we will take a sensor that has been demonstrated for use in measuring a set of generic host cell proteins and we will apply the sensor to measure a set of proteins for a specific cell line. In doing so, we will demonstrate the utility of our sensor to be ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  4. Collaboration-Optimized Network for Naturlistic Exploration and Communication about Traffic (CONNECT)

    SBC: APTIMA, INC.            Topic: 081NH2

    Collaboration-Optimized Network for Naturalistic Exploration and Communication about Traffic (CONNECT) 3/19/2018 Collaboration-Optimized Network for Naturalistic Exploration and Communication about Traffic (CONNECT) will be a tool that allows users to easily generate a wide range of data visualizations from the Fatality Analysis Reporting System (FARS). CONNECT will leverage open-source visual ...

    SBIR Phase I 2018 Department of Transportation
  5. Detection of THC Use in Drivers

    SBC: Giner, Inc.            Topic: 171NH1012

    Proposal title: Detection of THC Use in Drivers The overall objective of this program is to develop a portable, cost-effective and non-invasive sensor device for near real-time salivary THC detection to be used at roadside in drivers. This will eliminate the need for expensive and time-consuming analytical techniques which have a turn-around time of several days. During the Phase I program Giner ...

    SBIR Phase II 2018 Department of Transportation
  6. Broken Rail Detection from Flashing Rear End Device

    SBC: Migma Systems Inc.            Topic: 171FR2

    Proposal title: A Robust Railway Track Crack Detection System Using Thermal Signatures In Phase I, we developed a practical sensor platform suitable for mounting on the back of train. A large amount of IR images associated with rail tracks were collected on an MBTA train. Algorithms were developed to identify both right and left tracks from a moving train. To help detect track cracks, we develope ...

    SBIR Phase II 2018 Department of Transportation
  7. Detection of THC Use in Drivers

    SBC: N2 Biomedical, LLC            Topic: 171NH1

    Proposal title: Detection of THC Use in Drivers The intoxicating effects of marijuana are of concern to the law enforcement community as well as to the general manufacturing, service and commerce community where employees may need to be screened for intoxication. A reliable method to quantitatively measure the amount of the intoxicating agent delta-9- tetrahydrocannabinol (THC) in suspected marij ...

    SBIR Phase II 2018 Department of Transportation
  8. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: Senvol LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  9. Measuring the Concentration of Host-cell Proteins in Biomanufacturing Using Silicon Nanowire Array Sensors

    SBC: Advanced Silicon Group            Topic: NA

    Our innovation is a low cost, sensitive, quantitative biosensor that can detect many biomarkers on the same chip. Our sensor consists of vertically aligned silicon nanowires. The silicon nanowires’ high surface area to volume ratio makes them sensitive to the environment around them and can thus lead to high sensitivity detection. Each of the nanowires can be functionalized to be sensitive to ei ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  10. Riptide Hypoxic Zone AUV

    SBC: Riptide Autonomous Solutions, LLC            Topic: 827

    TECHNICAL ABSTRACT: Buoyancy driven oceanographic gliders, although reasonably cost effective, have challenges operating in the zones due to high gradients in water density. Under this topic, Riptide will provide a cost-effective autonomous undersea vehicle (AUV) design leveraged from Riptide's family of man-portable AUVs that can more effectively map the hypoxic areas. The stated goals of this to ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government