List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Developing Silicon Nanowire Sensors to Measuring Host-Cell Proteins at a Biomanufacturing Line

    SBC: Advanced Silicon Group            Topic: None

    Our biosensor is made of silicon nanowire arrays functionalized with antibodies to measure the concentration of specific proteins. In this grant we will take a sensor that has been demonstrated for use in measuring a set of generic host cell proteins and we will apply the sensor to measure a set of proteins for a specific cell line. In doing so, we will demonstrate the utility of our sensor to be ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  2. Nanomachine Device for Semiconductor Process Control Monitoring

    SBC: Xallent LLC            Topic: None

    Conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control and failure analysis. An increasing number of subtle defects become prominent drivers of failure as device size and operating margins decrease, e.g., processing anomalies in thin gate oxides, substrate problems related to do ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS INC.            Topic: None

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the asmanufactured material properties are not known. Attempts to predict performance o ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  4. Developing a robust and scalable calibration approach to low-cost AQ sensing

    SBC: Aerodyne Research, Inc.            Topic: 813

    Poor air quality represents a major public health risk, contributing to an estimated one of every eight deaths worldwide. Low-cost air quality sensors have developed rapidly over the last few years and offer the opportunity to make air quality monitoring widespread at an affordable price. However, low-cost sensors are currently unable to deliver accurate, reliable data due to a lack of understandi ...

    SBIR Phase II 2019 Department of CommerceNational Oceanic and Atmospheric Administration
  5. OpenORB Low-Cost Mooring Location Beacon for Costal Applications

    SBC: Triton Systems, Inc.            Topic: 825

    Triton Systems, Inc. proposes development of the Open-Source Oceanographic Asset Recovery Beacon (OpenORB) that will allow the deployment of coastal instrumentation moorings with affordable protection against loss. This open-source kit would significantly reduce the purchase price of a commercial location beacon by allowing the end-user to assemble a customized system with minimal time and effort. ...

    SBIR Phase II 2019 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Phase II Commercialization of HABStats: A Harmful Algal Bloom Species, Toxin and Total Phytoplankton Identification System

    SBC: CoastalOceanVision, Inc            Topic: 821

    In Phase I, we developed a prototype instrument for counting, sizing and identifying both non-toxic and toxic Harmful Algal Bloom (HAB) species. We did this by integrating three innovative technologies: High-throughput color, Light Field Imaging Flow Cytometry to acquire morphological information for each cell, Raman spectroscopy to acquire species-specific molecular information on pigments and tr ...

    SBIR Phase II 2019 Department of CommerceNational Oceanic and Atmospheric Administration
  7. Bottom Feeder- A Highly Maneuverable Autonomous Underwater Vehicle

    SBC: Tridentis Advanced Marine Vehicles LLC            Topic: 822

    The Bottom Feeder project is designed to prove out the research done in Phase I using a prototype platform. The prototype will be a full size version of the platform designed during Phase I. The Phase I platform was designed to work in two operational configurations, a highly efficient mode and a highly maneuverable mode, with the ability to switch between them while submerged. The platform is equ ...

    SBIR Phase II 2019 Department of CommerceNational Oceanic and Atmospheric Administration
  8. Ship-based Operations for UAS Swarms with Autonomous Pinniped Homing Over Nasty Environments (SOUSAPHONE)

    SBC: Charles River Analytics, Inc.            Topic: 9501

    Small Unmanned aircraft systems (UAS) play a critical and growing role in government, military, commercial, and scientific operations across a range of missions such as weather monitoring, natural disaster assessment, surveillance, and infrastructure inspection. Their versatility, maneuverability, and dependability, coupled with their ability to keep operators out of harm’s way, make them critic ...

    SBIR Phase I 2019 Department of CommerceNational Oceanic and Atmospheric Administration
  9. (Anno) Tator Online: A Web Application for Exploration and Curation of Underwater Video and Imagery

    SBC: CVISION AI INC            Topic: 9302

    Using modern web technologies, we will build an application that can be used to explore, enrich, and evaluate the wealth of underwater video and imagery being collected by NOAA and its partners. Existing data portals are primarily for text based or keyword search, and for viewing of existing data, lacking the ability for rich interaction, visualization of metadata, and adding new types of annotati ...

    SBIR Phase I 2019 Department of CommerceNational Oceanic and Atmospheric Administration
  10. Underwater Adhesive for Coral Restoration

    SBC: TIAX LLC            Topic: 9201

    TIAX proposes to demonstrate the feasibility of a quick tack, long pot life, and high strength underwater adhesive formulated to be delivered through a caulk gun like application device. This two part adhesive will pass through a static mixing nozzle during application, removing the need for hand-mixing the adhesive prior to use. Our adhesive will adhere strongly to commonly used artificial and na ...

    SBIR Phase I 2019 Department of CommerceNational Oceanic and Atmospheric Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government