List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Antisense Technology for Neural Protection and Repair

    SBC: Acorda Therapeutics, Inc.            Topic: N/A

    Spinal Cord Injury (SCI) is a devastating condition for which there is no effective treatment. The cost to society is enormous because most new cases occur in people under the age of 30 and these individuals have a near normal life expectancy. Therefore, the development of a new, effective therapy to treat SCI is imperative. We propose to use an established in vitro assay to screen antisense molec ...

    SBIR Phase I 2001 Department of Health and Human Services
  2. Tenascin-C-Fragments for Spinal Cord Regeneration

    SBC: Acorda Therapeutics, Inc.            Topic: N/A

    The goal of this project is to conduct pre-clinical tests of components of the extracellular matrix molecule tenascin-C that offer potential as therapeutics for enhancing nerve fiber regeneration. This may lead to the development of a treatment for spinal cord injury, a devastating condition for which there are no reparative treatments available. The study is based on ...

    SBIR Phase I 2001 Department of Health and Human Services
  3. PHYSICAL MODELS OF PROTEINS BY RAPID PROTOTYPING

    SBC: 3D Molecular Designs LLC            Topic: N/A

    N/A

    SBIR Phase I 2001 Department of Health and Human Services
  4. PHYSICAL MODELS OF PROTEINS BY RAPID PROTOTYPING

    SBC: 3D Molecular Designs LLC            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of Health and Human Services
  5. Compliant Brush Shroud Casing Development for Aircraft Engine Compressors

    SBC: ADVANCED COMPONENTS & MATERIALS, INC.            Topic: N/A

    The proposed Phase II program will optimize the design and manufacturing process of a compliant brush shroud casing. Recent tests at Wright Laboratories with staged brush seals have demonstrated significantly increased blade to shroud rub tolerance of acompliant casing. Phase I of the program is expected to demonstrate the feasibility of two innovative brush shroud designs with lower cost and we ...

    SBIR Phase I 2001 Department of DefenseAir Force
  6. Compliant Brush Shroud Casing Development for Aircraft Engine Compressors

    SBC: ADVANCED COMPONENTS & MATERIALS, INC.            Topic: N/A

    The proposed Phase II program will optimize the design and manufacturing process of a compliant brush shroud casing. Recent tests at Wright Laboratories with staged brush seals have demonstrated significantly increased blade to shroud rub tolerance of acompliant casing. Phase I of the program is expected to demonstrate the feasibility of two innovative brush shroud designs with lower cost and we ...

    SBIR Phase II 2001 Department of DefenseAir Force
  7. Power Optimizing Petabyte Disk System

    SBC: Advanced Cytometry Instrumentation Systems LLC            Topic: N/A

    65668 Instrumentation is needed that can rapidly analyze the interactions between living cells and candidate therapeutic agents. This project will develop a miniature, high performance flow cytometer, equipped with recent advances in lasers, optics, and detectors. The cytometer will rapidly evaluate many parameters one cell at a time, use very small samples sizes, avoid aggregate responses, an ...

    SBIR Phase I 2001 Department of Energy
  8. Superconducting RF Injector for High-Power Free-Electron Lasers (FEL)

    SBC: Advanced Energy Systems, Inc            Topic: N/A

    With the achievement of 1.7 kW CW IR operation and an upgrade to 10kW in progress, free-electron lasers (FEL) are now a serious option for high-power, military and commercial applications. As specifically identified in the recent

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  9. High-Temperature Highly-Efficient Ceramic Heat Exchanger

    SBC: Advanced Energy Systems, Inc            Topic: N/A

    65691 Extremely bright, affordable, photocathode electron sources are required for future DOE facilities such as the Next Linear Collider and Next Generation Light Sources. An electron gun with greater than 1 nC per bunch and less than 1 p mm-mrad normalized transverse rms emittance would meet this need, but the sub 1 p mm-mrad target remains elusive. Because axisymmetry has been shown to be im ...

    SBIR Phase I 2001 Department of Energy
  10. Advanced Strained-Superlattice Photocathodes for Polarized Electron Sources

    SBC: Advanced Energy Systems, Inc            Topic: N/A

    65702 A continuous wave cryogenic photocathode electron gun operating in the L-band is the preferred approach for a wide variety of next generation and advanced electron accelerators and light sources. The high average current required for these applications results in average power densities that are much higher than in previous electron guns due to the continuous wave operation. In addition, ...

    SBIR Phase I 2001 Department of Energy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government