You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Design Tools for Combustion Stability

    SBC: IN SPACE, L.L.C.            Topic: AF083112

    ABSTRACT:A joint experimental and computational project using a carefully designed, flexible test article is proposed to assess the velocity-coupled combustion response of a representative liquid rocket injector element to transverse acoustic disturbances. In the proposed Phase II, the response of an injector flowfield at supercritical pressure conditions will be simulated, measured, and reduced i ...

    SBIR Phase II 2015 Department of DefenseAir Force
  2. Surface Treatments for Stainless Steel Actuators

    SBC: IBC Materials & Technologies, LLC            Topic: AF131202

    ABSTRACT: Stainless steel ballscrew components, such as those found in landing gear and flap actuators on the C-130 aircraft, experience wear and subsequent failure due to corrosion, contamination and foreign object damage (FOD). High"dither"conditions, where the actuator undergoes a constant short-travel, high-frequency movement to maintain level flight, can also induce wear on actuator ballscr ...

    SBIR Phase I 2015 Department of DefenseAir Force
  3. Integrated In-process Strategy for Material and Process Specification Optimization

    SBC: RELIACOAT TECHNOLOGIES, LLC            Topic: AF141208

    ABSTRACT: The thermal spray process has many inherent complexities within each sub-process including feedstock manufacturing, component surface preparation and masking, torch parameter selection, robot trajectory and laboratory coating evaluation. Each sub-process is governed by rigid specifications that provide thermal spray applicators with procedural and process guidelines throughout the appl ...

    SBIR Phase I 2015 Department of DefenseAir Force
  4. Method for Evaluating Candidates for Additive Manufacturing (AM) Processes

    SBC: IMAGINESTICS, LLC            Topic: AF141213

    ABSTRACT: A challenge which continues to present a barrier to the utilization of AM and wide spread adoption is knowing when to use the technology. This is particularly problematic in aerospace and in MRO operations because the technology is still emerging, and knowledgeable, experienced practitioners remain in short supply and will likely remain so until the next generation of technicians and en ...

    SBIR Phase I 2015 Department of DefenseAir Force
  5. Cryogenic-Vacuum Compatible Infrared Scene Projection System (CVC IRSP) Based on the Digital Micromirror Device

    SBC: OPTICAL SCIENCES CORPORATION            Topic: AF083255

    ABSTRACT: This document presents Optical Sciences Corporation's SBIR technology transition proposal to complete development of an advanced Cryogenic-Vacuum Compatible Infrared Scene Projector (CVC IRSP) for Wide Field-of-View (WFOV) space sensor testing and to integrate the CVC IRSP into a government owned space simulation chamber. The CVC IRSP will be capable of projecting complex scenes w ...

    SBIR Phase II 2015 Department of DefenseAir Force
  6. EOLuS

    SBC: ASSURED INFORMATION SECURITY, INC.            Topic: AF131055

    ABSTRACT: Assured Information Security, Inc. (AIS) proposes Endpoint-Operated Link-assured Security (EOLuS), an effort to develop a product with the capability for realizing continuous end-to-end trust (EtET) in a dynamic network a network in which every client would verify and monitor the trustworthiness of its peers prior to communicating sensitive information. After the successful completion ...

    SBIR Phase II 2015 Department of DefenseAir Force
  7. SIGMA: Speedy Imagery Geo-registration and Motion Analysis

    SBC: VISION SYSTEMS INC            Topic: AF131151

    ABSTRACT: VSI proposes the development of the SIGMA (Speedy Imagery Geo-registration and Motion Analysis) system, which will address three key requirements by the end of Phase II: (i) adapt to different type of sensors, sensor-configurations and sensor operating conditions, (ii) handle large amount of data in real-time or close to real-time using limited resources, and (iii) operate under conditi ...

    SBIR Phase II 2015 Department of DefenseAir Force
  8. Hand-held In-situ Permethrin Detector (HIP-D)

    SBC: Five Stones Research Corporation            Topic: N142084

    Raman spectroscopy is a non-destructive optical technique for detecting molecules on a sample surface, and it is well-suited for the quantification of organic molecules within a mixture. Convenient hand-held Raman spectroscopes are currently manufactured by Ocean Optics, a recognized world leader in the manufacture of miniaturized spectrometers, and we propose to customize one for specific use by ...

    SBIR Phase I 2015 Department of DefenseNavy
  9. Validation of Automatic Ground Moving Target Indicator Exploitation Algorithms

    SBC: BLACK RIVER SYSTEMS COMPANY, INC.            Topic: AF131038

    ABSTRACT:The overall goal is to develop an evaluation systembased on real Mission dataof Ground Moving Target Indicator (GMTI) exploitation algorithms.Real-world Mission data is identified by analysts, who in the standard course of doing their job, fulfill Request for Information (RFI) Essential Elements of Information (EEI) responses.Our objectives are to provide the capability to evaluate a wide ...

    SBIR Phase II 2015 Department of DefenseAir Force
  10. DocMark: A Rule-based and Probabilistic Document Marking System

    SBC: ATC-NY INC            Topic: AF131052

    ABSTRACT: In order to prevent loss of sensitive data, organizations need to be able to tag data with classification and releasability metadata. Currently classification is a manual and labor-intensive process, which slows the dissemination of sharable data. ATC-NY will develop DocMark, a product to automatically determine classification and dissemination metadata and record it in standard forma ...

    SBIR Phase II 2015 Department of DefenseAir Force
US Flag An Official Website of the United States Government