You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Design Tools for Combustion Stability

    SBC: IN SPACE, L.L.C.            Topic: AF083112

    ABSTRACT:A joint experimental and computational project using a carefully designed, flexible test article is proposed to assess the velocity-coupled combustion response of a representative liquid rocket injector element to transverse acoustic disturbances. In the proposed Phase II, the response of an injector flowfield at supercritical pressure conditions will be simulated, measured, and reduced i ...

    SBIR Phase II 2015 Department of DefenseAir Force
  2. GPS Enhanced Dynamic Spectrum Access

    SBC: Echo Ridge, LLC            Topic: AF121158

    ABSTRACT:Echo Ridge and partner Wright State University (WSU) propose to prototype and evaluate the Phase I-developed novel performance enhancing signal processing algorithms enabled by dynamic spectrum access (DSA)-based cognitive radio (CR) and GPS navigation functionality operating on a common software defined radio (SDR) platform in a cognitive network (CN) (Elemental SDR-hosted Cross Applicat ...

    SBIR Phase II 2015 Department of DefenseAir Force
  3. Advanced OSHA Compliant Blast Cleaning Rooms (No Blast/HM Residue Migration Outside Blast Cleaning Room)

    SBC: Figure Engineering, LLC            Topic: AF131197

    ABSTRACT: The objective of this proposal is to develop blast cleaning enclosures (BCE) that eliminate exposure to hazardous materials (HM) due to substantial migration in and around the enclosure to increase the occupational health and safety of Air Force personnel. To achieve this cleaner safer BCE, typical operations and enclosures will be examined to identify mechanisms of HM generation and m ...

    SBIR Phase I 2015 Department of DefenseAir Force
  4. Preservation Matrix for Improved Biological Specimen Storage and Recovery

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: ST12B001

    The ability to rapidly detect and identify infectious organisms is critical for the accurate diagnosis of seasonal and sporadic outbreaks, emerging pathogens and agents of bioterrorism. Accurate detection requires high quality biological specimens, which

    STTR Phase II 2015 Department of DefenseDefense Advanced Research Projects Agency
  5. Surface Treatments for Stainless Steel Actuators

    SBC: IBC Materials & Technologies, LLC            Topic: AF131202

    ABSTRACT: Stainless steel ballscrew components, such as those found in landing gear and flap actuators on the C-130 aircraft, experience wear and subsequent failure due to corrosion, contamination and foreign object damage (FOD). High"dither"conditions, where the actuator undergoes a constant short-travel, high-frequency movement to maintain level flight, can also induce wear on actuator ballscr ...

    SBIR Phase I 2015 Department of DefenseAir Force
  6. Aircraft Maintenance Management to Unanticipated Failure Events

    SBC: Robbins-GIoia, LLC            Topic: AF131204

    ABSTRACT: The Air Force"s Air Logistics Centers (ALCs) are charged to maintain the fleet at maximum readiness. In order to achieve this goal, the ALCs perform aircraft scheduled maintenance using well-defined planning and scheduling processes and procedures by assigning MRO tasks to minimize the time an aircraft spends at the depot and the associated maintenance costs. However, the current system ...

    SBIR Phase I 2015 Department of DefenseAir Force
  7. Integrated Aircraft Sensor Network for Real Time Leak Detection

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: AF131206

    ABSTRACT: Aircraft damage resulting from environmental exposure and fluid leaks constitute a major portion of the costs associated with aircraft repairs and lead to significantly reduced mission readiness. The ability to identify contaminant exposure within airframes and inform maintenance personnel of leaks, corrosive environments, and chemical contaminants in difficult to access areas will all ...

    SBIR Phase I 2015 Department of DefenseAir Force
  8. Non-Destructive Inspection for Medium Caliber Gun Barrel Fatigue Crack

    SBC: Prime Photonics, LC            Topic: AF141205

    ABSTRACT: Prime Photonics is developing an ultrasonically enhanced magnetic field detection system that will measure defects, voids and residual stresses in ferrous and non-ferrous materials. Successful development and deployment of this technology will enable on condition replacement of critical components, increasing safety and reducing cost. This product can also be part of an integrated logis ...

    SBIR Phase I 2015 Department of DefenseAir Force
  9. Quantitative Gun Barrel Diagnostics with Remote Field Eddy Currents and Artificial Intelligence

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: AF141205

    ABSTRACT: Gun barrels have a variety of failure modes that must be monitored over the life of a barrel. Fatigue cracking is one of the most critical failure modes and can result in catastrophic barrel rupture if not detected and addressed. Currently, there is no existing NDI method or equipment to assess fatigue cracking within the barrel wall. Luna"s proposed technique has the advantage of autom ...

    SBIR Phase I 2015 Department of DefenseAir Force
  10. Integrated In-process Strategy for Material and Process Specification Optimization

    SBC: RELIACOAT TECHNOLOGIES, LLC            Topic: AF141208

    ABSTRACT: The thermal spray process has many inherent complexities within each sub-process including feedstock manufacturing, component surface preparation and masking, torch parameter selection, robot trajectory and laboratory coating evaluation. Each sub-process is governed by rigid specifications that provide thermal spray applicators with procedural and process guidelines throughout the appl ...

    SBIR Phase I 2015 Department of DefenseAir Force
US Flag An Official Website of the United States Government