List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS INC.            Topic: None

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the asmanufactured material properties are not known. Attempts to predict performance o ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Developing Lightning Data Services for Commercial and Public Applications

    SBC: CFD Research Corporation            Topic: 9401

    In this Phase I effort, CFD Research proposes the creation of a lightning services API using data from the GOES-16/17 Geostationary Lightning Mapper (GLM) and the development of valued-added lightning initiation and cessation products. Leveraging CFD Research’s experience in software and API development and atmospheric sciences for lightning research applications, this API will provide a simplif ...

    SBIR Phase I 2019 Department of CommerceNational Oceanic and Atmospheric Administration
  3. Additive Manufacture of Refractory Metal Propulsion Components

    SBC: Geoplasma, LLC            Topic: T9

    Niobium alloy (C-103) reaction control system (RCS) chambers have been used on numerous NASA programs.  However at elevated temperatures, the strength of C-103 decreases significantly.  Higher strength niobium alloys have been developed, but these alloys lack the formability of C-103.   Recently, Additive Manufacture (AM) of niobium and C-103 has been demonstrated using powder ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  4. Prediction of Plume Induced Rock Fracture for Landers

    SBC: CFD Research Corporation            Topic: T9

    The landing surface damage and liberation of debris particles caused by rocket plume impingement flow during spacecraft propulsive landing on unprepared surfaces of Moon, Mars, and other celestial bodies poses a high risk for robotic and human exploration activities.  Simply determining whether the plume induced loads exceed the bedrock bearing capacity threshold is not sufficient. An integra ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  5. A Scalable Gas-Particle Flow Simulation Tool for Lander Plume-Surface Interaction and Debris Prediction

    SBC: CFD Research Corporation            Topic: T9

    Spacecraft propulsive landings on unprepared regolith present in extra-terrestrial environments pose a high risk for space exploration missions. Plume/regolith interaction results in (1) the liberation of dust and debris particles that may collide with the landing vehicle and (2) craters whose shape itself can influence vehicle dynamics. To investigate such gas-granular interactions for large-scal ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  6. Low Emission Lean Fully Premixed (LFP) Injector/Combustor Development

    SBC: CFD Research Corporation            Topic: A1

    The overall objective of this SBIR project is the development of a novel concept for low emissions: a lean fully premixed (LFP) combustor for high overall pressure ratio small core engines. In order to achieve this major objective, a three-unit fully premixed injector has been conceptualized and proposed. Phase I scope includes design and demonstration of this injector, which will be composed of t ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. Multi-Fidelity Surrogate Modeling for Computational and Experimental Data Consolidation

    SBC: CFD Research Corporation            Topic: A1

    The goal of the project is to develop a mathematically rigorous, multi-fidelity surrogate modeling (MFSM) methodology to consolidate experimental and computational aerodynamic data into integrated databases with quantifiable uncertainty. The salient aspects of the proposed solution are: (1) a hierarchical MFSM formulation to encapsulate local response surface modeling, model adaptation/fusion, int ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. An Intelligent Framework to Develop Adaptive Parametric Reduced Order Model Database for Aerostructural Control

    SBC: CFD Research Corporation            Topic: A1

    The goal of the project is to develop an intelligent framework to construct adaptive parametric reduced order model (PROM) database for aeroservoelastic (ASE) analysis and aerostructural control. Leveraging on significant advancements by the proposing team in prior research, this Phase I effort will initiate a new frontier of ‘engineering intelligence’ to further ASE ROM development, i ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  9. High Temperature Oxidation Resistant Coatings Integrated with Carbon/Carbon Hot Structures

    SBC: Plasma Processes, LLC            Topic: H5

    The development of new hypersonic capabilities is important for the United States. In the near-term, application of hypersonic research and technologies is likely to be on enhanced defense systems, but this could eventually expand to include improved access to space capabilities that would directly benefit NASA. Hypersonic vehicle nose tips and leading edges require high thermal shock resistance c ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  10. Space Durability Testing via MISSE-FF of CORIN XLS Polyimide with Increased Flexibility and Tear Resistance

    SBC: Nexolve Holding Company, LLC            Topic: Z4

    Thin-film polymers are used in many spacecraft applications including multi-layer insulation and sunshields for thermal control, lightweight structural members in solar array blankets, inflatable/deployable structures, solar sail material for propulsion, as well as flexible solar array backplanes.  Materials on exterior spacecraft surfaces are subjected to a very harsh environment composed of ...

    SBIR Phase I 2018 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government