Award Data

Development of new polyurethane (PU) insulation foams through a non-toxic environmentally friendly composite approach. Target FR foams will exhibit high heat flow resistance as well as lower density than conventional PU. Foams involve synergism between novel phosphonate FRs and smoke suppression agents coupled with use of aerogel. Preliminary data show peak heat release rates reduced by 50% ver ...

Thermal Stir Welding (TSW) provides advancement over the more conventional Friction Stir Welding (C-FSW) process because it separates the primary processes variables thereby allowing independent control of metal stirring and forging from the stir zone temperature. However, the feedback for precise control of the stir zone temperature, and hence the process parameters to sustain that temperature w ...

The proposed Wireless, passive, SAW sensor system operates in a multi-sensor environment with a range in excess of 45 feet. This proposed system offers unique features in two (2) important areas. The first is in the development of a new sensor type, a strain gauge that is based on OFC techniques and implemented with the low loss characteristics of SAW Unidirectional transducers. The second is in t ...

a. Paragon Space Development Corporation¿ (Paragon) proposes to continue our investigation into the use of microporous-ionomer membrane technology to improve the robustness and effectiveness and simplify water recovery processes for space applications. Improved robustness and effectiveness will be evident through (1) reduced loading onthe downstream post processor due to the ionomer¿s unique pr ...

Using small aperture telescopes for detecting exoplanets could have a significant impact on astronomy and other imaging and space communication systems. In this new generation of smaller, lighter and more affordable coronagraph systems, the starlight is rejected with the aid of phase-based transparent masks capable of transmitting planetary light at small angular separation from the star. These so ...

Interdisciplinary Consulting Corporation proposes a sensor that offers the unique capability to make non-intrusive, direct, simultaneous mean and fluctuating shear stress measurement for subsonic and transonic test applications. Currently a standard for shear stress measurement tool does not exist. A precise silicon micromachined, differential capacitive, instrumentation grade sensor will facili ...

Frequency-locked single-frequency 2 micron fiber laser is proposed to be used for airborne/spaceborne coherent lidar measurements, i.e., Active Sensing of CO2 Emissions over Nights, Days, and Seasons. The laser is based on our proprietary fiber technology and extensive experience in fiber laser development, which features a compact, highly stable, frequency-stabilized light source. Advanced freque ...

High-temperature passive wireless surface acoustic wave (SAW) sensors are highly desirable for improving safety and efficiency in aviation and space vehicles. This proposal addresses the growth and processing of a new class of high temperature material into acceptable SAW wafers, the production of SAW temperature sensors, and the integration of the SAW and thin film antenna (SAWtenna). The proje ...

ZONA Technology, Inc. proposes an R & D effort to develop a Gust Load Alleviation (GLA) control system using a novel Leading Edge Stagnation Point (LESP) sensor that has the nearly instantaneous predictive capability. The real-time gust information from the sensor will enhance the performance of the proposed GLA control system. The GLA control method we will adopt is the Generalized Predictive Con ...

The proposed solution is to create a high fidelity simulation environment that merges a UAS ground control station (GCS) simulator with an air traffic control (ATC) simulator. The UAS GCS station will have the capability of introducing a single UAS or multiple UASs simulator operated by a single and/or multiple UAS pilots into the ATC. This simulation will have the ability to simulate manned aircr ...