You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Ionomer-membrane Water Processor System Design and EDU Demonstration

    SBC: PARAGON SPACE DEVELOPMENT CORPORATION            Topic: X301

    a. Paragon Space Development Corporation¿ (Paragon) proposes to continue our investigation into the use of microporous-ionomer membrane technology to improve the robustness and effectiveness and simplify water recovery processes for space applications. Improved robustness and effectiveness will be evident through (1) reduced loading onthe downstream post processor due to the ionomer¿s unique pr ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  2. Frequency-Locked Single-Frequency Fiber Laser at 2 Micron

    SBC: ADVALUE PHOTONICS INC            Topic: S101

    Frequency-locked single-frequency 2 micron fiber laser is proposed to be used for airborne/spaceborne coherent lidar measurements, i.e., Active Sensing of CO2 Emissions over Nights, Days, and Seasons. The laser is based on our proprietary fiber technology and extensive experience in fiber laser development, which features a compact, highly stable, frequency-stabilized light source. Advanced freque ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  3. Predictive Gust Load Alleviation Control Using Leading Edge Stagnation Point Sensor

    SBC: ZONA TECHNOLOGY INC            Topic: A207

    ZONA Technology, Inc. proposes an R & D effort to develop a Gust Load Alleviation (GLA) control system using a novel Leading Edge Stagnation Point (LESP) sensor that has the nearly instantaneous predictive capability. The real-time gust information from the sensor will enhance the performance of the proposed GLA control system. The GLA control method we will adopt is the Generalized Predictive Con ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  4. A UAS-ATC Simulation Test-Bed

    SBC: Sandia Research Corporation            Topic: A501

    The proposed solution is to create a high fidelity simulation environment that merges a UAS ground control station (GCS) simulator with an air traffic control (ATC) simulator. The UAS GCS station will have the capability of introducing a single UAS or multiple UASs simulator operated by a single and/or multiple UAS pilots into the ATC. This simulation will have the ability to simulate manned aircr ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  5. Extension of the Eddy Dissipation Concept for Improved Low-Cost Turbulence-Chemistry Interaction Modeling

    SBC: INNOVATIVE TECH APPLICATIONS LLC            Topic: A210

    The one CFD modeling area that has remained the most challenging, yet most critical to the success of integrated propulsion system simulations, is turbulence modeling. There is a need to develop mid-level CFD models for the interaction of turbulence and chemical reactions that give superior results to the simple models (e.g., Magnussen's Eddy Dissipation Concept), but which do not require the ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  6. X-Band GaN Power Amplifiers for Long Range Space RF Telecommunications

    SBC: Nitronex Corporation            Topic: O105

    The future capabilities of sensors and instrumentation deployed in space will continue to increase, resulting in increasing amounts of collected data. To reach these higher speed data rates, increases to the overall system gain of the communication link will be required. A deterministic method to increase system gain of a RF communication link is to provide higher transmitted RF power. However, ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  7. Six-Axis Force-Torque Transducer for Mars 2018 Mission

    SBC: ATI Industrial Automation, Inc.            Topic: S502

    The use of automated robotic tooling is required in a number of space missions. It is possible to have better tool control if the robotic arm could report loads experienced by the tooling.ATI Industrial Automation proposes to develop and prove technologies to be used in a low weight, low outgassing multi-axis force and torque transducer that can be used at cryogenic temperatures. The transducer wi ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  8. Nonlinear Data Analysis Tool for Scramjets and Other Engines

    SBC: GLOYER-TAYLOR LABORATORIES INC            Topic: A202

    The UCDS process is the result of 50 years of research into combustion instability by the worlds leading scientists and engineers. The breakthroughs that created UCDS have provided a solid analytical foundation upon which tools can be developed and applied. One of these is the UCDS nonlinear tool, which GTL has been applying with much success in the investigations of the dynamics of solid rocket ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  9. ModelCenter-Integrated Reduced Order Multi-fidelity Optimization Scheme for NASA MDAO Framework

    SBC: ZONA TECHNOLOGY INC            Topic: A208

    In this effort, ZONA Technology, Inc. aims at developing an innovative multi-fidelity and multi-disciplinary optimization (MDO) sub-framework that can (i) effectively reduce the number of design variables without screening-out any of the variables, (ii) accelerate the convergence through a novel design space evolution technique, and (iii) enable rapid determination of design sensitivities (gradien ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  10. 1.55 Micron High Peak Power Fiber Amplifier

    SBC: ADVALUE PHOTONICS INC            Topic: S101

    In this proposal, we propose to demonstrate and build a 1.55 micron single frequency high energy and high peak power fiber amplifier by developing an innovative Er-doped gain fiber with large core diameter and high gain per unit length. 1.55 micron single frequency high energy and high peak power fiber amplifier is needed for coherent lidar and sensing. In Phase I, we will design and fabricate thi ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government