You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Ionomer-membrane Water Processor System Design and EDU Demonstration

    SBC: PARAGON SPACE DEVELOPMENT CORPORATION            Topic: X301

    a. Paragon Space Development Corporation¿ (Paragon) proposes to continue our investigation into the use of microporous-ionomer membrane technology to improve the robustness and effectiveness and simplify water recovery processes for space applications. Improved robustness and effectiveness will be evident through (1) reduced loading onthe downstream post processor due to the ionomer¿s unique pr ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  2. An Ultra Low Power Cryo-Refrigerator for Space

    SBC: CREARE LLC            Topic: S107

    Future NASA Space Science Missions will incorporate detectors, sensors, shields, and telescopes that must be cooled to cryogenic temperatures. An enabling technology for these missions is advanced cryocoolers that can provide continuous and distributed cooling with minimal input power. On this program, Creare proposes to develop and demonstrate an innovative cryocooler that produces refrigeratio ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  3. An Advanced Wet Expansion Turbine for Hydrogen Liquefaction

    SBC: CREARE LLC            Topic: X1001

    This proposal is responsive to NASA SBIR Topic X10.01, specifically, the need for efficient small- to medium-scale hydrogen liquefaction technologies, including domestically produced wet cryogenic turboexpanders. Future NASA missions will require hydrogen liquefaction systems for spaceport, planetary, and lunar surface operations. A critical part of these systems is the cryogenic expansion turbi ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  4. Frequency-Locked Single-Frequency Fiber Laser at 2 Micron

    SBC: ADVALUE PHOTONICS INC            Topic: S101

    Frequency-locked single-frequency 2 micron fiber laser is proposed to be used for airborne/spaceborne coherent lidar measurements, i.e., Active Sensing of CO2 Emissions over Nights, Days, and Seasons. The laser is based on our proprietary fiber technology and extensive experience in fiber laser development, which features a compact, highly stable, frequency-stabilized light source. Advanced freque ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  5. Predictive Gust Load Alleviation Control Using Leading Edge Stagnation Point Sensor

    SBC: ZONA TECHNOLOGY INC            Topic: A207

    ZONA Technology, Inc. proposes an R & D effort to develop a Gust Load Alleviation (GLA) control system using a novel Leading Edge Stagnation Point (LESP) sensor that has the nearly instantaneous predictive capability. The real-time gust information from the sensor will enhance the performance of the proposed GLA control system. The GLA control method we will adopt is the Generalized Predictive Con ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  6. A UAS-ATC Simulation Test-Bed

    SBC: Sandia Research Corporation            Topic: A501

    The proposed solution is to create a high fidelity simulation environment that merges a UAS ground control station (GCS) simulator with an air traffic control (ATC) simulator. The UAS GCS station will have the capability of introducing a single UAS or multiple UASs simulator operated by a single and/or multiple UAS pilots into the ATC. This simulation will have the ability to simulate manned aircr ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  7. A Turbo-Brayton Cryocooler for Aircraft Superconducting Systems

    SBC: CREARE LLC            Topic: A201

    Hybrid turbo-electric aircraft with gas turbines driving electric generators connected to electric propulsion motors have the potential to transform the aircraft design space by decoupling power generation from propulsion. Resulting aircraft designs such as blended-wing bodies with distributed propulsion can provide the large reductions in emissions, fuel burn, and noise required to make air tran ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  8. High Temperature and High QE Broadband Longwave Infrared SLS FPA for LANDSAT

    SBC: QMAGIQ LLC            Topic: S104

    We propose a high-performance broadband infrared focal plane array (FPA) for the Thermal Infrared Sensor (TIRS) on NASA's LANDSAT satellite. The FPA will feature a cutoff wavelength of 13 microns, operate at>55K, have a format of 640x512, quantum efficiency>30%, and will be realized using Type-II InAs/GaSb strained layer superlattice (SLS) photodiodes. In Phase I we will develop the basic d ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  9. X-Band GaN Power Amplifiers for Long Range Space RF Telecommunications

    SBC: Nitronex Corporation            Topic: O105

    The future capabilities of sensors and instrumentation deployed in space will continue to increase, resulting in increasing amounts of collected data. To reach these higher speed data rates, increases to the overall system gain of the communication link will be required. A deterministic method to increase system gain of a RF communication link is to provide higher transmitted RF power. However, ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  10. Six-Axis Force-Torque Transducer for Mars 2018 Mission

    SBC: ATI Industrial Automation, Inc.            Topic: S502

    The use of automated robotic tooling is required in a number of space missions. It is possible to have better tool control if the robotic arm could report loads experienced by the tooling.ATI Industrial Automation proposes to develop and prove technologies to be used in a low weight, low outgassing multi-axis force and torque transducer that can be used at cryogenic temperatures. The transducer wi ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government