List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Atmospheric Lidar with Cross-Track Scanning

    SBC: LITESPAR, INC.            Topic: E301

    An eye-safe, multispectral cross-track scan subsystem with a large receiver aperture and a narrow FOV is proposed for the NASA Cloud Physics Lidar to increase horizontal area coverage. The +/-15 degree cross-track scan capability will cover +/- 5 km from nadir at a 20 km altitude. The cross-track scanner uses a whiskbroom pattern with three simultaneous scans and independent receiver FOV's ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  2. Modular SiGe 130 nm Cell Library for Extreme Environments

    SBC: RIDGETOP GROUP, INC.            Topic: S301

    NASA space missions utilizing application-specific integrated circuits (ASICs) under extreme conditions have a critical need for high performance analog cell libraries to support the mission requirements. With the introduction of silicon germanium (SiGe) processes, there is an opportunity to provide resilient analog circuit designs that handle both temperature and radiation hardening requirements. ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  3. Highly Efficient Solid Oxide Electrolyzer&Sabatier System

    SBC: Paragon Space Development Corporation            Topic: H101

    Paragon Space Development Corporation® (Paragon) and ENrG Incorporated (ENrG) are teaming to provide a highly efficient reactor for carbon monoxide/carbon dioxide (CO/CO2) conversion into methane (CH4). The system is a gravity-independent, compact, leak-tight, Solid Oxide Electrolyzer (SOE) system with embedded Sabatier reactors (ESR). Utilizing Corning Incorporated (Corning) Intellectual Propert ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  4. Ultra High Temperature Refractory Materials

    SBC: ADVANCED CERAMICS MANUFACTURING, LLC            Topic: T1001

    Legacy refractory materials that have origins dating to the original Saturn program are commonly used in current launch facilities. Although they failure to meet the target requirements, they are the only approved material. Our research team proposed to develop an ultra high temperature refractory system that uses a non-cement binder, a high temperature macro aggregate, and reactive nano aggregat ...

    STTR Phase I 2013 National Aeronautics and Space Administration
  5. Model Center-Integrated Reduced Order Multi-fidelity Optimization Scheme for NASA MDAO Framework

    SBC: Zona Technology, Inc            Topic: A208

    During Phase I of this effort, ZONA Technology, Inc. significantly improved the medium fidelity design and analysis capability of NASA's MDAO architecture by successfully adding ZONA CAE tools such as ZAERO, ZEUS, ASTROS and ZMORPH synergistically integrated within a ModelCenter MDAO framework. In Phase II of this effort, ZONA aims to improve all the three tiers of NASA's MDAO architectu ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  6. Innovative Structural and Material Concepts for Low-Weight Low-Drag Aircraft Design

    SBC: Zona Technology, Inc            Topic: A301

    The overall objective of this multi-phase project is to explore, develop, integrate, and test several innovative structural design concepts and new material possibilities that will fully leverage the expertise of the ZONA/Boeing Team for enhancing the current state-of-the-art of aircraft design. The technical objectives specific to the Phase I of this effort are threefold. First, a suitable anisot ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  7. Energy-Deposition to Reduce Skin Friction in Supersonic Applications

    SBC: Physics, Materials, and Applied Mathematics Research L.L.C.            Topic: A304

    NASA has drawn attention to an impending need to improve energy-efficiency in low supersonic (M<~3) platforms. Aerodynamic efficiency is the foundation of energy-efficient flight in any regime, and low drag is one of the fundamental characteristics of aerodynamic efficiency. For supersonic aircraft, drag can be broadly decomposed into four components: viscous or skin friction drag, lift-induced ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  8. Inflatable Habitat with Integrated Primary and Secondary Structure

    SBC: Paragon Space Development Corporation            Topic: H501

    Paragon Space Development Corp (Paragon) and Thin Red Line Aerospace (TRLA) proposes to explore the utilization of inflatable structures by designing a habitation module as an integrated, all-fabric inflatable structural architecture, rather than modifying rigid space structural designs with an inflatable envelope. Paragon and TRLA have developed several concepts with the potential to eliminate th ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  9. 1.55 Micron High Peak Power Fiber Amplifier

    SBC: AdValue Photonics Inc            Topic: S101

    In this proposal, we propose to demonstrate and build a 1.55 micron single frequency high energy and high peak power fiber amplifier by developing an innovative Er-doped gain fiber with large core diameter and high gain per unit length. 1.55 micron single frequency high energy and high peak power fiber amplifier is needed for coherent lidar and sensing. In Phase II, we will further optimize the Er ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  10. Tunable Single Frequency 2.05 Micron Fiber Laser Using New Ho-Doped Fiber

    SBC: AdValue Photonics Inc            Topic: S101

    In this proposal, we propose to demonstrate and build a widely tunable, narrow linewidth, single frequency fiber laser near 2.05 micron by developing an innovative Ho-doped single mode fiber. Such near 2.05 micron fiber laser is needed for coherent lidar and interferometric fiber sensing. Based on our successful demonstration in Phase I, our newly developed Ho-doped fibers have the capability of s ...

    SBIR Phase II 2013 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government