List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Microcapillary Quartz Sensors for Screening Injectability of High Concentration Protein Formulations

    SBC: Qatch Technologies, LLC            Topic: None

    The objective of this SBIR Phase I proposal is to determine the feasibility of viscosity characterization of high concentration protein formulations (HCF) by QATCH’s microcapillary quartz technology. HCFs are non-Newtonian fluids with shear-thinning behavior and they are administered to patients by subcutaneous or muscular injections. The injectability of HCFs depends on the viscosity at high-sh ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. IF Conversion System for High-Bandwidth Multiplexed Sensors Arrays

    SBC: Alphacore, Inc.            Topic: None

    Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for Phase II of NIST's 2018 soliciation for Exploratory Measurement Science Topic 9.04.02.68.The proposing team has already successfully developed and evaluated a prototype board in Phase I.The goal in Phase II is therefore to achieve three primary objectives:1) Optimize the design ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  3. Effect of Surface Finish and Post-Processing on the Fatigue Life of Additively Manufacturing Parts

    SBC: Voxel Innovations, Inc.            Topic: N182126

    In response to the need for drastic surface finish improvement on additively manufactured metal components, Voxel Innovations Inc. has developed a novel manufacturing process termed: oscillatory pulsed electrochemical machining (O-PECM). O-PECM is a heat-free, stress-free, surface finishing technique capable of producing sub-200 nm Ra roughness. In O-PECM, a thin envelope of build material is prin ...

    SBIR Phase I 2019 Department of DefenseNavy
  4. Submarine Sensor Environmental Inference

    SBC: High Rez Consulting, LLC            Topic: N182135

    Within the increasingly contested undersea operational arena, the Navy needs a tactical and competitive advantage in undersea sensing and detection through improved situational awareness with respect to environmental parameters, such as sound speed profile (SSP) and bottom properties, that affect overall submarine sonar sensor performance. Current approaches for enhancing environmental situational ...

    SBIR Phase I 2019 Department of DefenseNavy
  5. Seamless Knitting for Military Protective Clothing

    SBC: PROPEL, LLC            Topic: N182124

    Propel will undertake research efforts to investigate seamless knitting for U.S. Navy knitwear as compared to cut and sew assembly. Propel will develop initial concepts and swatches and evaluate their technical feasibility, comparing promising concept to traditionally sewn seams using a variety of internationally recognised standards and test methods. Propel will also develop a design brief and co ...

    SBIR Phase I 2019 Department of DefenseNavy
  6. Biphase Extended Release Tablet Formulation for Nerve Agent Pretreatment

    SBC: Zymeron Corporation            Topic: CBD181004

    Given the unforeseen/unanticipated use of nerve agents in the battlefield and on the homeland, military personnel can benefit from this oncedaily pretreatment. It may also be desirable to pretreat certain medical and emergency aid personnel following a known/suspected nerveagent attack. Also, a novel, improved PB extended release formulations can be commercialized for the treatment of myasthenia g ...

    SBIR Phase I 2019 Department of DefenseOffice for Chemical and Biological Defense
  7. Rapid construction of 3-D Satellite models from limited amounts of 2-D imagery

    SBC: Vision Systems, Inc.            Topic: AF181020

    Increases in space traffic have caused an ever-growing need to recognize, track, and determine the operational state of both known and unknown satellites in-situ. Imagery from ground and/or space-based observation platforms provide a convenient and versatile data source for such characterization but is often limited in both quantity and quality. Rapid and automated 3D reconstruction of satellite m ...

    SBIR Phase I 2019 Department of DefenseAir Force
  8. Commercial Solutions for Weather Forecasting

    SBC: EarthCast Technologies, LP            Topic: AF182001

    A comprehensive weather intelligence system capable of producing global environmental intelligence with real-time, high-resolution information and predictions requires the synthesis of observational surface data, radar data, aircraft, space and ground-based remotely sensed data, and the most advanced numerical weather prediction (NWP) technologies. Recent advances in real-time operational global o ...

    SBIR Phase I 2019 Department of DefenseAir Force
  9. Commercial Solutions for Weather Forecasting

    SBC: Cook, Ashton Robinson            Topic: AF182001

    Exploitation of weather and climatological information has historically provided significant (and at times decisive) advantages for Air Force and Department of Defense missions (e.g., WWII, 2003 Iraq, etc.)Current and short-term (0-7 day) and climatological (long-term average) weather information near the geographic locations of missions have often been the basis for these operations.However, a cr ...

    SBIR Phase I 2019 Department of DefenseAir Force
  10. Advanced Nano Composite Coating for Gear Applications

    SBC: UNITED PROTECTIVE TECHNOLOGIES, LLC            Topic: AF182005

    The Air Force desires technologies demonstrating value and commercial success in non-defense applications which will solve current Air Force problems.Gears are central functioning parts to most mechanical systems such as engine transmissions.Fuel consumption and maintenance costs are significantly increased due to efficiency losses resulting from friction and wear of gears. The development of chem ...

    SBIR Phase I 2019 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government