You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. COTS MMW Radar for Tracking Persons within a Security Perimeter

    SBC: PSQUAREDT LLC            Topic: HSB0121005

    The implications of the proposed investigations are that radar systems already implemented for the automotive industry can be exploited, adapted and optimized for this application. These radar systems are inexpensive, of small size, employ advanced processing techniques which allow the tracking of threat targets, transmit low average power (10 milliwatts) and are proven to be people safe. We will ...

    SBIR Phase I 2012 Department of Homeland Security
  2. Development of Low Temperature Ultracapacitor

    SBC: Yardney Technical Products, Inc.            Topic: A12aT010

    The objective of this Phase 1 effort is to develop an asymmetric supercapacitor (ASC) that provides>10 Wh/kg energy density and a high power density, and maintains this performance down to -55 degrees C. Yardney Technical Products (YTP), a recognized specialty high energy battery manufacturer in Pawcatuck, CT in collaboration with the Jet Propulsion Laboratory (JPL) proposes to design, develop and ...

    STTR Phase I 2012 Department of DefenseArmy
  3. Nondestructive Concrete Characterization System

    SBC: Troxler Electronic Laboratories            Topic: A12aT013

    Currently nuclear-based gauges are the most widely used equipment in the construction industry to measure moisture and density of pavement materials. Such measurements are very accurate, rapid, and non-destructive. Attempts to replace these nuclear methods by non-nuclear methods have shown strong limitations. For this project, we propose to integrate nuclear and seismic technologies to measure t ...

    STTR Phase I 2012 Department of DefenseArmy
  4. High Performance, Cost Effective, Planar Molecularly Controlled Semiconductor Resistor (MOCSER) Gas Sensors on InAs and InN

    SBC: KYMA TECHNOLOGIES, INC.            Topic: A12aT014

    We plan to implement a planar Molecularly Controlled Semiconductor Resistor (MOCSER) gas sensor on both InAs and InN platforms for the ppt-ppm detection of NOx and H2O. Kyma Technologies and Duke University will leverage Duke"s leading MOCSER based NOx sensor technology which uses surface functionalization of InAs with hemin (chloroprotoporphyrin IX iron(III)) to create a strong affinity for NOx. ...

    STTR Phase I 2012 Department of DefenseArmy
  5. High Quality, Low Cost, and High Purity AlGaN Epitaxy with Reduced Surface Dislocation Density

    SBC: KYMA TECHNOLOGIES, INC.            Topic: A12aT019

    Aluminum Gallium Nitride (AlGaN) has broad dual use applications for power transistors, high frequency transistors, high power Schottky barrier diodes, and solar-blind detectors, as well as ultra-violet laser diodes and ultra-violet light emitting diodes. This unique material system spans the capabilities that lie between Gallium Nitride (GaN) and Aluminum Nitride (AlN), enabling custom tailored p ...

    STTR Phase I 2012 Department of DefenseArmy
  6. High-Quality AlGaN Epitaxial Films on GaN and AlN Substrates

    SBC: ADROIT MATERIALS, INC.            Topic: A12aT019

    The objective of proposed work is to demonstrate the feasibility of obtaining AlGaN films of any composition with dislocation densities below 1x106 cm-2 on native nitride substrates either by sustaining a pseudomorphic state or by reducing the number of threading dislocations by specific stress relieving schemes at the interfaces or within the thickness of the layers.

    STTR Phase I 2012 Department of DefenseArmy
  7. Fuel Flexible Reformer

    SBC: PRECISION COMBUSTION, INC.            Topic: OSD12EP1

    Precision Combustion, Inc. (PCI) proposes to develop an ultra-compact, fuel-flexible reformer, including balance-of-plant components, designed for operation with fuel cell stacks for 300 We portable power generator systems. The reformer technology will be based upon our novel proprietary high mass and heat transfer catalytic elements, which were demonstrated to be superior (i.e., more durable, hig ...

    SBIR Phase I 2012 Department of DefenseArmy
  8. Remote Deployment of Explosive Detection Material

    SBC: CORVID TECHNOLOGIES, LLC            Topic: A12007

    Corvid Technologies is pleased to offer a solution for remotely delivering explosive detection materials. The objective is to deliver a liquid explosive detection agent with a 40mm projectile using existing launch systems. Innovative materials and design techniques will be used to ensure accurate projectile delivery and projectile integrity during storage. A successful Phase I effort will requi ...

    SBIR Phase I 2012 Department of DefenseArmy
  9. Improved Mobile User Objective System (MUOS) Metaferrite Based Antenna for SATCOM

    SBC: MINERVA SYSTEMS & TECHNOLOGIES LLC            Topic: A12045

    The objective of this proposal is to design and develop UHF Satellite communications (SATCOM) circular polarized antennas using advanced metamaterials to achieve high gain performance with smaller dimensions (i.e., size and weight). The metamaterials we propose belong to a class of magneto-dielectric materials. The advantages and disadvantages of dielectric loading applied to electromagnetic devi ...

    SBIR Phase I 2012 Department of DefenseArmy
  10. Advanced Small, Lightweight Multi-Fueled 1,000- 1,500 W Variable Speed Load Following Man-Portable Power Unit

    SBC: PRECISION COMBUSTION, INC.            Topic: A12048

    Precision Combustion, Inc. (PCI) proposes an ultra-compact JP-8 conversion kit that will enable a lightweight spark-ignited engine as a man portable multi-fueled power unit, while also advancing a breakthrough cross-cutting add-on reformer technology that could broadly enable lightweight spark-ignited engines to use JP-8 for a wide variety of applications. Achieving the man portable weight goa ...

    SBIR Phase I 2012 Department of DefenseArmy
US Flag An Official Website of the United States Government