List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. SnapCap: a device to decontaminate central venous catheters (CVC) with 5 snaps

    SBC: Contech Medical, Inc.            Topic: NICHD

    Project Summary Abstract We propose a new approach to the decontamination of central venous catheters and the prevention of central line associated bloodstream infectionsCLABSIan important healthcare associated infectionCLABSIs cost the US healthcare system approximately $billion annuallyPronovostNEJMAdditionallyCLABSIs can be life threateningespecially in the very young and critically illEven whe ...

    STTR Phase I 2018 Department of Health and Human Services
  2. Caring for the Caregiver: A Theory-Driven Mobile Intervention to Promote Caregiver Well-Being

    SBC: Pro-Change Behavior Systems Inc            Topic: NIA

    Overmillion Americans are currently providing unpaid care to a family memberrelativeor friend with Alzheimer s disease or related dementiaWhile caregiving can be a positive experience that brings meaning and an increased sense of purposeit can also take a tollNearlyof Alzheimer s and dementia caregivers rate their emotional distress as high or very highand as many assuffer from depressionCaregiver ...

    SBIR Phase I 2018 Department of Health and Human Services
  3. Rotorcraft Fuel Bladder Weight and Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA182001

    Response Technologies will attempt to qualify to MIL-DTL-27422Fs phase I performance testing criteria for thefuel cell test cubes[Class BSemi rigid or self-supporting fuel construction, Type ISelf-sealing, and Protection Level CFull self-sealing against 50 caliber and partial self-sealing against 14.5 mm] .Response Technologiesuses an additive manufacturing process that initially creates a textile ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Rapid Test to Assist Therapy in Neonatal Sepsis and Necrotizing Enterocolitis

    SBC: PROTHERA BIOLOGICS, LLC            Topic: R

    The primary goal of this proposed research is to develop a rapid point of care test that assesses the risk of neonatal sepsisNSand or necrotizing enterocolitisNECin infants based on Inter alpha inhibitor proteinsIAIPlevels in bloodThe test is expected to be simpleuser friendlyportable and suitable for use in the NICUNS and NEC are associated with high mortality and morbidityincluding adverse neuro ...

    SBIR Phase I 2018 Department of Health and Human Services
  5. SBIR Phase I: The Transformation of X-ray Detectors for Medical Imaging

    SBC: NGS Detectors LLC            Topic: BM

    This SBIR Phase I project focuses on the development and demonstration of a new high resolution X-ray detector to be utilized (initially) in medical diagnosis. The early work by NGS Detectors and collaborators has shown an improvement in resolution by a factor of almost 10 over the X-ray detectors in current use. The focus of this Phase I project is to now improve both the resolution and efficienc ...

    SBIR Phase I 2018 National Science Foundation
  6. Development of a Wind Turbine Blade Surface Coating to Reduce Damage due to Lightning

    SBC: AQUANIS, INC.            Topic: 14b

    Lightning strikes and near-strikes on wind turbine blades cost wind farm operators millions of dollars every year, representing one of their largest O&M risks and expenses, as well as a primary cause of turbine downtime (resulting in lost power production). These negative effects increase the levelized cost of wind energy. With the incidence of lightning strikes increasing as turbines get larger, ...

    SBIR Phase I 2018 Department of Energy
  7. Developing BEM Applications for the Reinsurance Industry

    SBC: Prisere Llc            Topic: 09c

    Inefficient use of energy wastes capital that could be more productively invested in other segments of the U.S. economy. At the same time, the reinsurance industry is eager to reduce property losses arising from increasingly severe weather. But existing reinsurance loss models do not take into consideration the resiliency benefits of energy efficiency measures. The objective of the Phase I SBIR re ...

    SBIR Phase I 2018 Department of Energy
  8. Gamma-Heated In-Core Thermoacoustic Sensor

    SBC: Btech Acoustics, LLC            Topic: 30a

    We will develop an acoustically-telemetered, frequency-multiplexed, gamma-heated thermoacoustic sensors that can simultaneously monitor local gamma flux and coolant temperature at multiple locations in the core of an operating commercial nuclear reactor. These sensors will require no external power source and will telemeter temperature encoded as the frequency of the sound radiated by the sensor a ...

    SBIR Phase I 2018 Department of Energy
  9. GAA-ITEM: Personalizing the Prediction of Anti-therapeutic Antibody Response in Pompe Disease Patients

    SBC: EPIVAX, INC.            Topic: 999

    Abstract SignificanceInfantile Pompe DiseaseIPDis an autosomal recessive glycogen storage disorder caused by a deficiency of acid alpha glucosidaseGAAleading to accumulation of glycogen in lysosomesprimarily in skeletalcardiac and smooth musclesUntreated IPD infants die within the firstyears of lifeEnzyme replacement therapyERTwith recombinant human GAArhGAAimproves survival and quality of lifebut ...

    SBIR Phase I 2018 Department of Health and Human Services
  10. Additively Manufactured Inflatable Hulls- Improved Survivability- 20% Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    Seam failures of flexible inflatable hulls is the primary reason for failures of military RHIBS and CRCs.These failures are a result of the current manufacturing methods being used, and which have been in place for over fifty years.Whats more, the manufacturing methods and fragmented supply chain of these hulls result in very long and unreliable lead times.These shortcomings impact the survivabili ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government