You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. ON-LINE PLANT ANALYZER UTILIZATION IN CONTROL ROOM FOR SURVEILLANCE OF PLANT SAFETY

    SBC: Dynatrek Inc.            Topic: N/A

    THE PRINCIPAL SCOPE OF THE PROPOSED RESEARCH IS TO DEVELOP SOFTWARE FOR A BC-CONTROLLER WHOSE PURPOSE IS TO SUPPLY AND CONSTANTLY UPDATE THE BOUNDARY CONDITIONS (BC) TO AN ON-LINE PLANT ANALYZER, ENABLING IT TO FAITHFULLY TRACK A NUMBER OF THE CONTINUOUSLY MEASURED PLANT PARAMETERS. THE BC-CONTROLLER SAMPLES PLANT MEASUREMENTS FROM THE PLANT COMPUTER MEMORY. THE PLANT ANALYZER, IN TURN, PROVIDES D ...

    SBIR Phase II 1985 Nuclear Regulatory Commission
  2. Development of a Laboratory Scale CD-SAXS Device for Semiconductor Metrology Applications

    SBC: Jordan Valley Semiconductors, Inc.            Topic: N/A

    A semiconductor metrology tool will be developed employing the technique of small-angle x-ray scattering (SAXS) to measure the critical dimension (CD) of patterned device structures. The feasibility of the SAXS technique to measure CD has been shown using high-power synchrotron radiation facilities which are not of practical use to the semiconductor industry. The ultimate project goal is to produc ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  3. PERFORM AND REPORT EXPERIMENTS TO DEMONSTRATE THE FEASIBILITY OF THE CONCEPT.

    SBC: Leak Detection Services Inc            Topic: N/A

    PERFORM AND REPORT EXPERIMENTS TO DEMONSTRATE THE FEASIBILITY OF THE CONCEPT.

    SBIR Phase I 1985 Nuclear Regulatory Commission
  4. Monitor for Risk of Structural Collapse

    SBC: Sekos, Inc.            Topic: N/A

    The proposal is to develop a system to monitor fire-induced structural vibrations that provide real time data correlating with structural integrity. The system is designed to bridge an "information void" and provide firefighters with information that can warn of impending collapse. The system, based on accelerometer technology, will monitor structural integrity through the algorithmic analysis of ...

    SBIR Phase II 2004 Department of CommerceNational Institute of Standards and Technology
  5. Novel Technical Approach to Produce III-N Sample Libraries

    SBC: TECHNOLOGIES & DEVICES INTERNATIONAL,            Topic: N/A

    TDI proposes to produce combinatorial GaN and AlGaN samples library having a wide range of doping and fabricated using a variety of surface treatment conditions. These samples will be grown using novel technological approach based on advanced hydride vapor phase epitaxy (HVPE). This method is known to produce bulk GaN materials with low defect density. Recently, TDI has demonstrated high throughpu ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  6. Dual-Probe CD-AFM Calibration

    SBC: XIDEX CORPORATION            Topic: N/A

    Xidex proposes to demonstrate the feasibility of calibrating a critical-dimension atomic force microscope (CD-AFM) without the use of a reference artifact in such a way that high-precision critical dimensions can be generated independently of changes in probe tip shape. We plan to demonstrate sub-nanometer repeatability for tip-to-tip calibration, and demonstrate single-point critical-dimension me ...

    SBIR Phase II 2004 Department of CommerceNational Institute of Standards and Technology
  7. SCAP Content Editor

    SBC: G2, INC.            Topic: N/A

    NIST and G2 have been on the forefront of security automation with the development of the Security Content Automation Protocol (SCAP). However, the barrier to entry for SCAP content creation is the requirement to have in depth knowledge of the underlying specifications. This project aims to allow security experts to create SCAP content without the need to be an expert in the specification. By leve ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  8. Fulcrum Biometrics' Plan for Research and Development of WS-BD Conformant Handheld Fingerprint Sensor

    SBC: Fulcrum Biometrics, LLC            Topic: N/A

    Trusted biometric validation of individual identities has never been more important. Several contributing factors are the increase in global terrorism, identity theft and the increase in legislation which are driving the accelerated adoption of biometric technology. Unfortunately, the biometrics industry has not actively responded to the changing market conditions being driven by the explosion in ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  9. An Automated Lapping Apparatus and Process for High- Process for High-Precision Random Profile Roughness Specimen Fabrication

    SBC: X-Wave Innovations, Inc.            Topic: N/A

    The measurement and quality control for smooth engineering surfaces are becoming more and more important in modern science and technology due to their important engineering functions and high production costs. NIST has frequently received requests for U.S. industry to provide Standard Reference Material (SRM) high-precision, random profile roughness specimens to support smooth surface measurements ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government