Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. A Priori Error-Controlled Simulations of Electromagnetic Phenomena for HPC

    SBC: COMPUTATIONAL SCIENCES LLC            Topic: A11aT015

    The project will remove a key difficulty that currently hampers many existing methods for computing unsteady electromagnetic waves in unbounded regions. The accuracy and/or stability of the simulations may deteriorate over long times due to the treatment of the outer boundaries via artificial boundary conditions. We propose to develop a universal algorithm and software that will correct this probl ...

    STTR Phase I 2011 Department of DefenseArmy
  2. A Real-Time, Non-Invasive Monitoring System of Combat Casualties for Early Detection of Hemorrhagic Shock During Transport and Higher Echelon Medical

    SBC: FLASHBACK TECHNOLOGIES, LLC            Topic: A09AT027

    On the battlefield, medics must quickly determine injury severity, treat the greatest threats to life, diagnose hemorrhage and establish a triage order. The objective of this research project is to apply our active, long-term learning technology to the task of modeling and prediction of central blood volume parameters from extremely large, and variable physiological datasets. In Phase I, we appl ...

    STTR Phase II 2011 Department of DefenseArmy
  3. Advanced Flame Resistant Resin System for Carbon Fiber Reinforced Composite Shipboard Applications

    SBC: Technova Corporation            Topic: N11AT014

    Shipboard structures can benefit from the relatively high performance-to-weight ratio, fatigue life, durability, processability and multi-functionality of polymer composites (versus metals). The fire, smoke and toxicity (FST) performance and the initial economics of composites, however, cannot match those of metals. Efforts to replace metals with composites in shipboard structures have emphasized ...

    STTR Phase I 2011 Department of DefenseNavy
  4. Advanced-Architecture Compressor/Expanders for Energy Storage Applications

    SBC: Bright Energy Storage Technologies, LLP            Topic: N11AT028

    Bright Energy Storage Technologies and the Engines and Energy Conversion Laboratory at Colorado State University propose to demonstrate the feasibility of a custom reversible compressor design for use in compressed air energy storage systems. The design proposed combines a very lightweight rotary compressor design with extremely high flow volumes, allowing a highly efficient device at extremely lo ...

    STTR Phase I 2011 Department of DefenseNavy
  5. Agile beam/wavefront control for sub-aperture-based imaging systems

    SBC: Boulder Nonlinear Systems, Inc.            Topic: AF10BT35

    ABSTRACT: Boulder Nonlinear Systems recently developed and delivered a beam scanner that non-mechanically steers a monochromatic, 5-cm beam over an 80a x 80a field of regard (FOR) with sub-milliradian resolution. This prototype uses a transmissive, wide-angle stepper (coarse steering unit), which is very compact and easily inserts into conformal, sub-aperture assemblies. To provide high resolut ...

    STTR Phase I 2011 Department of DefenseAir Force
  6. An Accurate 3D Real-Time Simulation Tool for Generating Hardbody Thermal Histories

    SBC: CFD Research Corporation            Topic: MDA10T003

    Existing thermal analysis tools for optical signature generation are employed in an off-line manner, and are inadequate for new closed-loop real-time system simulations being pursued by MDA. This STTR project aims to develop and demonstrate an innovative simulation tool for the automatic generation and subsequent computation of reduced thermal models for accurate, real-time analysis of complex 3D ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  7. Biomimetic Membranes for Direct Methanol Fuel Cells

    SBC: Oceanit Laboratories, Inc.            Topic: A11aT013

    The proposed research effort is focused on developing a highly conducting, nanostructured membrane for use in high temperature direct methanol fuel cells (DMFC). Polymer nanofiber mats with high temperature stability and water retaining inorganic nanoparticles will be prepared through electrospinning process. The nanofiber mats will be compacted and the pores will be infiltrated using a hydrophobi ...

    STTR Phase I 2011 Department of DefenseArmy
  8. CNT Based Microstrip Plasma Limiter

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: MDA10T001

    Accurate Automation Corporation will develop a carbon nanotube based microstrip plasma limiter suitable for inclusion on RF printed circuit boards used on the front-end of an X-Band phased-array receiver. This device will capitalize on the ability to use carbon nanotubes to reduce the size and cost of an RF limiter while dramatically increasing the performance. Specific attention will be focused o ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  9. Compact Radar Technology For Over the Horizon Small-Boat and Semi-Submersible Detection and Tracking

    SBC: First RF Corporation            Topic: N11AT002

    As with all service branches within the Department of Defense (DoD), the mission objectives of the Navy are expanding to encompass not only major combat operations, but also asymmetric warfare scenarios. This expanding role requires the Navy to increasingly operate in littoral waters where effective identification of small craft and semi-submersibles is a critical capability for both fleet protect ...

    STTR Phase I 2011 Department of DefenseNavy
  10. Defect Reduction at the Silicon (112) Wafer Surface by Amorphization and Recrystallization

    SBC: Amethyst Research Incorporated            Topic: MDA11T002

    Silicon wafers oriented on (112) are the preferred substrates for deposition of mercury cadmium telluride layers by molecular beam epitaxy. Surface defects introduced during polishing of the wafers degrade the quality of the epitaxy and the performance of infrared detectors fabricated within these materials. We propose a process for reducing the density of the defects that are inherent in the si ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government