List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Meshfree-Based Fracture Evaluation and Design Tool for Welded Aluminum Ship Structures

    SBC: Advanced Dynamics, Inc.            Topic: N10AT041

    The aluminum alloys have low density, relatively high strength, and high strength-to-weight ratio, which brings some major advantages in marine structure design, fabrication, and operations. However, marine ships are subjected to a complex and severe loading, and the typical failure mode of aluminum under extreme dynamics loading such as wave slamming and high velocity impact is ductile fracture. ...

    STTR Phase I 2010 Department of DefenseNavy
  2. Deterministic and Statistical Characterization of the Impact of Control Surface Freeplay on Flutter and Limit-Cycle Oscillation (LCO) using Efficient

    SBC: Advanced Dynamics, Inc.            Topic: N10AT003

    Research is proposed for the development and implementation of state of the art computational and experimental tools for the investigation of the impact of control surface freeplay on the flutter and limit cycle oscillation characteristics of two-dimensional and three-dimensional wings in subsonic and transonic flow. Highly efficient and accurate aeroelastic simulation tools will be constructed ba ...

    STTR Phase I 2010 Department of DefenseNavy
  3. Multiscale Modeling and Analysis of Foreign Object Damage in Ceramic Matrix Composites with the Material Point Method

    SBC: Advanced Dynamics, Inc.            Topic: N10AT010

    This Small Business Technology Transfer Phase I project is aiming at developing and implementing a multiscale composite model to predict the ceramic matrix composite (CMC) response to the impact loading by foreign objects. In particular, the physics-based model will be applied to describe the multiscale foreign object damage (FOD) phenomena of CMCs due to the complex nature of impact dynamics coup ...

    STTR Phase I 2010 Department of DefenseNavy
  4. STOCHASTIC MUTISCALE/MULTISTAGE MODELING OF ENGINE DISKS

    SBC: Advanced Dynamics, Inc.            Topic: N10AT028

    Turbine disks are amongst the most critical components in aero- and naval-vessel engines. They operate in a high pressure and temperature environment requiring demanding properties. Nickel-based supperalloys which have high creep and oxidation resistance at high temperatures are widely used as the material of turbine disks. The elevated-temperature strength of this supperalloy and its resistance t ...

    STTR Phase I 2010 Department of DefenseNavy
  5. III-V Based Focal Plane Arrays for Video-Rate Terahertz Imaging

    SBC: TRAYCER DIAGNOSTIC SYSTEMS, INC.            Topic: AF08T006

    Owing to a unique set of intellectual property and core expertise, this Phase II team, led by Traycer Diagnostic Systems, will build and characterize a packaged, 16x16 terahertz focal plane array (FPA) for broadband video-rate imaging at frequencies up to 1.3 THz. Traycer’s competitive advantage is based on its record-performing detectors, novel antennas, and array architectures that permit a d ...

    STTR Phase II 2010 Department of DefenseAir Force
  6. Analysis and Modeling of Foreign Object Damage (FOD) in Ceramic Matrix Composites (CMCs)

    SBC: N&R ENGINEERING            Topic: N10AT010

    The Phase I deliverable will be a physic-based model which represents a CMC gas turbine component concomitantly at the material level and the structural level. This model will be probabilistically analyzed to account for the uncertainties in material properties and the uncertainties in the size and impact velocities of possible foreign objects (FOD). A ceramic material must display sufficient capa ...

    STTR Phase I 2010 Department of DefenseNavy
  7. Low-Cost Ball/Air/Magnetic Hybrid Bearing System for Extended-Life Micro Gas Turbine Engines

    SBC: Nastec, Inc.            Topic: N10AT037

    A unique type of air lubricated thrust bearing called a Wave Bearing is proposed to assist a rolling element bearing to carry the thrust load and to improve the bearing’s life when used in a micro gas turbine engine. The Wave Bearing technology will provide improved reliability, safety and life compared to rolling element bearings used alone, as well as to allow simplification of engine design a ...

    STTR Phase I 2010 Department of DefenseNavy
  8. Platform Li-Ion Battery Risk Assessment Tool

    SBC: Oceanit Laboratories, Inc.            Topic: N10AT014

    Modern warfare is becoming increasingly dependent on high technology and the means to power it. Lithium-ion batteries are a popular power choice due to high energy density and long charge hold. Unfortunately Lithium-ion batteries also have some distinct disadvantages including the possibility of catastrophic failure. This is of significant importance when the battery failure may take place in clos ...

    STTR Phase I 2010 Department of DefenseNavy
  9. Advanced Interceptor Infra-Red Search and Track System (IRSTS) for Missile Defense Applications

    SBC: Oceanit Laboratories, Inc.            Topic: MDA08T002

    The Oceanit¡¦s/APL Foveal InfraRed Search and Track (FIRST) prototype is a dual channel cryogenic WFOV optical sensor system. FIRST provides multifaceted support for an airborne IR search and track and uses the unique Multi-target-tracking Optical Sensor-array Technology (MOST) sensor chip, which has been developed at MDA. FIRST supports instantaneous field-of-view up to 90 degrees, with 360 deg ...

    STTR Phase II 2010 Department of DefenseMissile Defense Agency
  10. Development of Multi-Frequency Multi-Scale Radiation Transport Modeling

    SBC: Prism Computational Sciences, Inc.            Topic: AF08T020

    The objective of this proposal is to develop advanced radiation transport modeling techniques that accurately and efficiently treat transport in media having widely varying optical properties; in particular, hot gases and plasmas with optical depths ranging from the optically thin to the optically thick regimes. We will develop a hybrid diffusion-Monte Carlo (HDMC) model that efficiently transpor ...

    STTR Phase II 2010 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government