Award Data

Sivananthan Laboratories, Inc. and the University of Illinois at Chicago (UIC) will collaborate to develop a Monte Carlo (MC) transport simulation package for devices based on III-V Type-II superlattice (T2SL) materials into a commercial offering suitable for device design and evaluation.UICs existing, research-grade, ensemble MC transport code is predictive of carrier transport in T2SL materials, ...

This proposal is in response to the Defense Health Agency 2017 Phase I SBIR topic 17B-005.The approach is the use of a membrane oxygen pump using newly developed nano-thickness membranes with all the layers less than 1 micron total.Nanometer thickness membranes enable more oxygen output per surface area at temperatures of 300-600 C than current state-of-the -art 600-800 C membranes that are 50-300 ...

Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

CU Aerospace (CUA) and team partners San Jose St. University (SJSU) and Lockheed Martin Space Systems Company (LMSSC) propose to develop a robust epoxy resin regenerator capable of improving cryocooler efficiency by more than 30%, and to design an enhanced compressor motor capable of improving the cryocooler efficiency by more than 20%. LMSSC manufactures a space cryocooler that already meets most ...

The use of laser technologies and high-power electronics is rapidly being incorporated into tactical platforms for imaging, target designation, and range finding. Electronic equipment including lasers demand power from a tactical aircraft and produce large amounts of thermal energy as a waste product. Current thermal management technologies will not be sufficient for future aircraft as thermal man ...

The U.S. Navy currently utilizes a number of towed systems from surface ship and submarines for sensing and communication applications. In a number of these cases, a tow cable extends either down from a surface ship or up from a submarine through the upper part of the water column where seawater temperature can be both highly variable vs. depth and dynamic in time and geographic location. Having a ...

Tool materials development has been the major limit for the application of friction stir technologies/welding (FSW) on hard alloys such as steels and titanium alloys over the past decade. During friction stir welding on steels, temperatures can exceed 1000°C, so the tool material needs to be strong enough to sustain wearing and deformation at elevated temperatures for long times. There are two ma ...

Qualification of additively manufactured parts is hampered by the inherent uncetainty in properties due to heterogeneity in processing, microstructure, and defects. The proposed effort combines high-throughput testing of static and dynamic properties using tailored sample geometry, fixture design, and load application method with microstructure quantification and analysis. This system will drastic ...

Presently the missile defense systems are using a reactive and program-centric framework for assessing industrial base risk. The Phase I effort focused on developing a wide and deep network algorithm using Industrial Product-Support Vendor (IPV) Gen II program for predicting the probability of failure. The proposed Phase II effort leverages the Phase I work and will focus on three main goals:(1) I ...

Oceanit proposes to develop and demonstrate novel, tailored, designer separator materials with optimized properties to maximize lithium-ion cell/battery performance, life, safety and reliability.