You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
A Modified GMAW System for Distortion Reduction and Travel Speed Increase through Separate Heat Input and Deposition Rate Control
SBC: ADAPTIVE INTELLIGENT SYSTEMS Topic: N07211In traditional GMAW and modifications, the current melting the wire is the same as the current heating the base metal. To maintain a minimally acceptable productivity, the base metal heat input is typically much greater than the required to control the distortion at an acceptable or desirable level. In the modified GMAW proposed, a bypass torch is added to an existing GMAW system to bypass part of ...
SBIR Phase II 2009 Department of DefenseNavy -
Novel, Optimal, Physics-Based Reduced Order Models for Nonlinear Aeroelasticity
SBC: Advanced Dynamics, Inc. Topic: AF08BT03Research is proposed for the development and implementation of state of the art, reduced order nonlinear aeroelastic models for multidisciplinary/multi-fidelity optimization problems. Highly efficient and accurate aeroelastic simulation tools will be constructed based upon the mathematical formalism of optimal prediction theory and a novel implementation of a filtered harmonic balance solution met ...
STTR Phase I 2009 Department of DefenseAir Force -
VABS Enabled Design Environment for Efficient High-Fidelity Composite Rotor Blade and Wing Section Design
SBC: Advanced Dynamics, Inc. Topic: A08022This SBIR aims at developing a high-fidelity, yet efficient and easy-to-use, composite rotor blade and wing section design environment to facilitate rapid and confident aeromechanics assessment during conceptual design stages. A well-known technical barrier for composite rotor blade and wing section design is the lack of a user friendly, efficient and high-fidelity design tool to realistically rep ...
SBIR Phase II 2009 Department of DefenseArmy -
Direct Write via Digital Beam Processing for Rad-Hard Flexfet CMOS
SBC: American Semiconductor, Inc. Topic: MDA08023The is an effort to increase radiation hardness/survivability of microelectronics through innovation of production processes and capabilities by establishing an economically viable low-volume sub-65nm rad-hard foundry CMOS capability based on Digital Beam Processing (DBP) technology. American Semiconductor (ASI) and Digibeam Corporation (DBC) propose a collaboration to evaluate sub-65nm radiation- ...
SBIR Phase I 2009 Department of DefenseMissile Defense Agency -
Decision Support System Based On Collaborative-orientated System Engineering Cpabilities
SBC: Anautics, Inc. Topic: AF083229As the Air Force (AF) begins the progression of applying systems engineering from the top-level definition of the system architecture down to a granular level of design it is very important to also realize the changes that will be taking place through Technology Insertion initiatives. Continuous system engineering is required to preserve the integrity of a system, facilitate the development of new ...
SBIR Phase I 2009 Department of DefenseAir Force -
Accelerated Learning through Serious Game Technology
SBC: TIER 1 PERFORMANCE SOLUTIONS LLC Topic: OSD08CR8Military network environments will be subject to both internal and external threats for the foreseeable future. Internal threats to cyber networks from U.S. personnel receive little attention in comparison to external threats; yet, the consequences can be even more devastating. The lack of tools for understanding insider threat, analyzing risk mitigation alternatives, and communicating results e ...
SBIR Phase I 2009 Department of DefenseAir Force -
Multi-layered lightweight alloy development for improved blast and penetration resistance
SBC: ATI, INC. Topic: A09AT010This program is to develop multi-layered,light weight armor alloys systems that offer improved fragmentation and armor piercing performance as compared to any other monolithic structures. Such alloys and laminated configuration will be developed by utilizing advanced computational techniques to assist in the development of complimentary alloys that would provide an optimal combination of hardness ...
STTR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency -
Highly Corrosion Resistant Aluminum Alloys: Innovative Processing Methods to Enhanced Corrosion Resistance (e.g., layered structures, etc.)
SBC: ATI, INC. Topic: OSD09C03Two different approaches will be investigated for producing aluminum alloys with a layer structure that have mechanical properties similar to Al 7050-T7 and Al 7075-T6 and greatly improved corrosion resistance. Layered aluminum alloys will be produced using the Novelis-Fusion™ casting process. This process is very cost effective and has been demonstrate on commercial products. The other appro ...
SBIR Phase I 2009 Department of DefenseNavy -
Innovative Methodologies for the Development of a High Strength, Anodize-Free Corrosion Resistant, Aerospace Aluminum Alloys
SBC: ATI, INC. Topic: OSD09C02The objective of this program is develop high strength aluminum alloys ( as high strength as that of 7075-T6) that would not require anodization to achieve corrosion resistance. Among the Al alloy systems, only 7xxx and Al-Cu-Li alloy systems are capable of such a high strength level of 7075-T6 properties ( design minimum tensile yield stress of 75 ksi). Therefore, only these two alloy systems ...
SBIR Phase I 2009 Department of DefenseNavy -
The Design of Defensive Software Systems
SBC: Computer Measurement Laboratory, LLC Topic: OSD09IA3CML proposes to extend its current work in dynamic kernel monitoring for attack recognition and mitigation. The focus of this proposal is on mitigating the effects of an attack on executing software process by an individual user. The object of interest is the mapping of the activity of a user of a software system onto a model of their normal use of this software. In the construction of a mathe ...
SBIR Phase I 2009 Department of DefenseAir Force