You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fast Response Fabric Test Setup and Dynamic Fabric Model for BURNSIM

    SBC: ADVANCED COOLING TECHNOLOGIES INC            Topic: AF071025

    Advanced Cooling Technologies, Inc. (ACT) will develop a Fast Response Fabric Test Setup using hot gas impingement conditions by the jet engine exhaust from the Short Take Off and Vertical Landing (STOVL) aircrafts during the Phase I of the proposed SBIR programs. The fabric testing will measure the thermal response and properties of various clothing and Personal Protective Equipment (PPE) fabrics ...

    SBIR Phase I 2007 Department of DefenseAir Force
  2. Shock and Vibration Tolerant Capillary Two-Phase Loops

    SBC: ADVANCED COOLING TECHNOLOGIES INC            Topic: A06193

    Advanced Cooling Technologies, Inc. (ACT), supported by Hamilton Sundstrand, proposes to develop a shock and vibration tolerant Capillary Two-Phase Loop (CTPL) for military vehicle applications. The proposed CTPL differs from the traditional loop heat pipes and capillary pumped loops in the evaporator design, which provides inherent tolerance to shock and vibration. Two additional features are add ...

    SBIR Phase II 2007 Department of DefenseArmy
  3. Robust, Non-Toxic, Corrosion Inhibitor System

    SBC: DYNALENE INC            Topic: N07117

    Proposed is a robust, non-toxic corrosion inhibitor system consisting of novel, stable colloidal, hybrid polymeric or composite materials that are modified to have functional groups covalently or ionically combined with selected corrosion inhibition groups and are mainly prepared by atom transfer radical polymerization. Chain length and number and type of functional groups can be adjusted. Hydroph ...

    SBIR Phase I 2007 Department of DefenseNavy
  4. Advanced Thermo-Fluid Using Hybrid Nanoparticles

    SBC: DYNALENE INC            Topic: OSD04EP8

    The high degree of heat removal from directed energy (DE) weapons requires a next-generation leap in the performance of the heat transfer device/mechanism and also requires a novel thermo-fluid. Neither is available at this time. Nanofluids and Phase Change Materials (PCM) have been developed to increase the thermophysical properties of a base fluid, but the gain is not enough for the extremely hi ...

    SBIR Phase II 2007 Department of Defense
  5. Bulk, Exchange-Coupled Nitride Magnets

    SBC: Advanced Materials Corp            Topic: A06T003

    During Phase I, we have conducted proof-of-principle experiments to fabricate exchange-coupled isotropic permanent magnets with SmFeN-Fe4N compositions employing shock wave consolidation technique. We have also successfully synthesized nearly 100% Fe16N2 in bulk form. Under this Phase II plan, we propose to optimize and further enhance the isotropic exchange-coupled permanent magnets with higher e ...

    STTR Phase II 2007 Department of DefenseArmy
  6. Low Reynolds Number, High-Lift Airfoil Design for VTOL UAVs

    SBC: AIRFOILS INC            Topic: A06006

    A complementary theoretical and experimental effort to design and verify high-lift, low pitching-moment airfoils for VTOL UAVs is proposed. In Phase I, an accurate, rapid, test capability is being validated over the range of Reynolds numbers from 50,000 to 500,000 by investigating the E 387 airfoil, the low Reynolds number calibration standard, in The Pennsylvania State University Low-Speed, Low- ...

    SBIR Phase II 2007 Department of DefenseArmy
  7. Design, fabrication, and characterization of novel waveguide structures for high-power and compact THz sources based on a novel concept

    SBC: ArkLight            Topic: AF06110

    In this Phase II proposal from the ArkLight/Lehigh team, we propose to investigate variety of semiconductor and polymeric electro-optic crystals and materials with one of our goals for scaling up the output powers of the THz sources. We are going to explore a class of the novel THz components combined with many novel configurations with one of our objectives for further increasing the output power ...

    SBIR Phase II 2007 Department of DefenseAir Force
  8. Hardware Component Technology to Enable SUAV/SUGV Based Geo-location and Hand-off

    SBC: CHATTEN ASSOC., INC.            Topic: A07044

    Chatten Associates proposes to develop a Geo-Indexed Gimbaled Instrument: a stabilized gimbal with a camera and laser range finder payload that is capable of precisely geo-locating anything in its view. The instrument can be easily integrated onto a variety of small unmanned ground vehicles (SUGV) or small unmanned air vehicles (SUAV) in both the current and future force. In addition to providing ...

    SBIR Phase I 2007 Department of DefenseArmy
  9. Dexterous Robotic Manipulator for Small Robotic Platforms

    SBC: AUTOMATIKA, INC.            Topic: N06162

    Automatika, Inc. proposes to develop MaCS, a high-fidelity manipulator system for use on samm unmanned robot vehicles for use in EOD missions for IED disarming. The system is intended to utilize high-performance joint actuators and allow for easy operator control in cartesian space using a simple vector-controlled control-input method to simplify endpoint motions for complex tasks.

    SBIR Phase I 2007 Department of DefenseNavy
  10. Reduction of Structural Mass Fraction for Extreme Solar HALE Flying Wings

    SBC: Bally Ribbon Mills            Topic: SB072044

    The VULTURE Air Vehicle Program is an exploratory development program with the overall goal to develop and demonstrate the ability to deliver and maintain an airborne payload on station for an uninterrupted period exceeding 5 years using a heavier-than-air platform system. It is envisioned that this program will, at a minimum, develop and demonstrate advanced reliability technologies for air vehi ...

    SBIR Phase I 2007 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government