You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Launch Weather Decision Support System

    SBC: Radiometrics Corporation            Topic: T1

    NASA wants a cost-effective atmospheric remote sensing system providing accurate temperature and humidity profiles to least 10 km height in clear and cloudy conditions. Radiometrics Microwave Profiler (MP) products currently provide accurate temperature and humidity profiles in good agreement with radiosondes to 3 km height. Good agreement can be extended beyond 10 km height using variational retr ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  2. Multiphase Modeling of Solid Rocket Motor Internal Environment

    SBC: CFD RESEARCH CORPORATION            Topic: T1

    Solid rocket motor (SRM) design requires detailed understanding of the slag accumulation process in order to: predict thrust continuity, optimize propellant conversion efficiency, predict coning effects from sloshing, and to assess potential orbital debris (slag) hazard. Current state-of-the-art models for SRM environment do not have the capability to simulate the accumulation and dynamics of slag ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  3. Transient Acoustic Environment Prediction Tool for Launch Vehicles in Motion During Early Lift-Off

    SBC: CFD RESEARCH CORPORATION            Topic: T1

    Launch vehicles experience extreme acoustic loads dominated by rocket plume interactions with ground structures during liftoff, which can produce damaging vibro-acoustic loads on the vehicle and payloads if not properly understood and mitigated against. Existing capabilities for modeling turbulent plume physics are too dissipative to accurately resolve the acoustic propagation and detailed vehicle ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  4. High Performance 3D Photonic Integration for Space Applications

    SBC: FREEDOM PHOTONICS LLC            Topic: T8

    In this work, Freedom Photonics will team with University of California, Santa Barbara to develop a hybrid integration platform that integrates yielded, best-of-breed active optical components with low-cost, high functionality Silicon Photonics components in a manner that is compatible with foundry fabrication (such as AIM Photonics). This will be performed in a highly manufacturable manner, using ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  5. Demonstration of Autonomous Differential Throttle-based Flight Control for Aircraft with Distributed Electric Propulsion

    SBC: EMPIRICAL SYSTEMS AEROSPACE INC            Topic: T15

    A series of RDT&E activities is proposed to create and demonstrate a reconfigurable, autonomous flight controller for the Aircraft for Distributed Electric Propulsion Throttle-based Flight Control (ADEPT-FC) which was designed and built in Phase I, a 33 lb remote controlled aircraft featuring eight overwing electric ducted fans (EDFs) distributed spanwise along the wing’s trailing edge. The prop ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  6. Optical Intersatellite Communications for CubeSat Swarms

    SBC: CROSS TRAC ENGINEERING, INC.            Topic: T11

    .The growing interest in CubeSat swarm and constellation systems by NASA, the Department of Defense and commercial ventures has created a need for self-managed inter-satellite networks capable of handling large amount of data while simultaneously precisely synchronizing time and measuring the distances between the spacecraft. CrossTrac Engineering, Inc., in cooperation with our partners Professor ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  7. Through Wall Wireless Intelligent Sensor and Health Monitoring (TWall-ISHM) System

    SBC: AMERICAN GNC CORPORATION            Topic: T13

    To support development at NASA’s Stennis Space Center (SSC) testing facilities and infrastructure for the monitoring of remote or inaccessible measurement locations, American GNC Corporation (AGNC) and Rensselaer Polytechnic Institute (RPI) have developed the Through Wall Wireless Intelligent Sensor and Health Monitoring (TWall-ISHM) System. This technology allows deploying flexible instrumentat ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  8. uG-LilyPond- Floating Plant Pond for Microgravity

    SBC: SPACE LAB TECHNOLOGIES, LLC            Topic: T7

    Regenerative space life support will undoubtedly require food production, to recover nutrients and close the carbon loop in a spacecraft habitat. Aquatic plants have enormous potential for edible biomass production but have been little studied as potential food crops for space applications. The proposed μG-LilyPond™ is an autonomous environmentally controlled floating plant cultivation system ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  9. Medical Electro-Textile Sensor Simulation

    SBC: LR TECHNOLOGIES, Inc.            Topic: DHP17A001

    In this topic, we plan to design a vital EMF sensor to work under any conditions. The sensor will be integrated with smart clothing and using e-textile materials.

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  10. Prediction of Plume Induced Rock Fracture for Landers

    SBC: CFD RESEARCH CORPORATION            Topic: T9

    The landing surface damage and liberation of debris particles caused by rocket plume impingement flow during spacecraft propulsive landing on unprepared surfaces of Moon, Mars, and other celestial bodies poses a high risk for robotic and human exploration activities. Simply determining whether the plume induced loads exceed the bedrock bearing capacity threshold is not sufficient. An integrated m ...

    STTR Phase I 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government