You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. CORC; Cable Based High Field Hybrid Magnets for Future Colliders

    SBC: Advanced Conductor Technologies LLC            Topic: 26b

    "The next generation of very high field accelerator magnets (20 T or more) are expected to be made with high-temperature superconductors (HTS) along with conventional low-temperature superconductors (LTS) to reduce cost. The operation and protection of these magnets becomes very challenging particularly if the HTS coils are made with the tapes and operate at a much lower current than the LTS coils ...

    STTR Phase II 2018 Department of Energy
  2. Scaleup of a Combined Spray Pyrolysis and Fluidized-bed Reactor Method for the Production of High Performing Layered Nickel- rich Cathode Materials as a Continuous Process

    SBC: HAZEN RESEARCH, INC.            Topic: 14a

    To increase the utilization of electric vehicles, the US Department of Energy is seeking to reduce the cost of electric vehicle batteries to less than $125/kWh by 2022. To achieve this goal, the costs of cathode materials, which account for approximately 30% of the cost of vehicle batteries, must be reduced significantly. To address the challenge of lowering the costs of advanced lithium battery c ...

    STTR Phase II 2018 Department of Energy
  3. Low-cost and Flexible Transparent Electrodes Based on Ag–ZTOF (Zn–Sn–O–F) Amorphous Composites Through Ink-jet Printing

    SBC: HAZEN RESEARCH, INC.            Topic: 09b

    Sn-doped In2O3 (ITO) is the industry standard and most widely used transparent conducting electrode (TCE) because of its good electrical and optical properties. However, ITO has a number of disadvantages: ITO is not a suitable TCE for next-generation, high-efficiency, flexible OLEDs, because of its inappropriate work function, difficulty in creating desired patterns, low stability, delaminantion d ...

    STTR Phase I 2018 Department of Energy
  4. A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers

    SBC: JC Solutions            Topic: 14b

    Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

    STTR Phase I 2018 Department of Energy
  5. Plug-In Hybrid Vehicle Optimization Using Vehicle-to-Cloud Connectivity

    SBC: Macchina, LLC            Topic: 13c

    Plug-in hybrid electric vehicles (PHEVs) represent a growing segment of the U.S. passenger vehicle market. An increasing number of PHEV models are available to consumers. PHEVs are similar to parallel hybrid vehicles like the Toyota Prius in that they have an electric motor and internal combustion engine that are used synergistically to significantly reduce fuel consumption while maintaining a nea ...

    STTR Phase I 2018 Department of Energy
  6. Demonstration of the technological capability for production of neutron-focusing nickel mirrors

    SBC: ELECTROFORMED NICKEL, INC.            Topic: 15a

    Neutron scattering is one of the most useful methods of studying the structure and dynamics of matter. These methods require large installations at national laboratories, such as Oak Ridge National Laboratory (ORNL), National Institute of Standards and Technology (NIST) and other facilities constructed or planned in the US and around the world. These facilities serve a large and diverse community ...

    STTR Phase II 2018 Department of Energy
  7. Fast fingerprinting & detection of materials using portable / hand-held devices and high performance computing for use in manufacturing and supply chain applications.

    SBC: OPTIMAL SOLUTIONS, INC            Topic: 20d

    Material analysis is critical to enable the production of safe and quality goods and today companies use cumbersome, time-consuming, and error-prone methods to analyze materials using expensive analytical laboratories. Companies have a pressing need to measure material properties (like chemical composition and physical properties) throughout their supply chains. This project addresses DOE’s inte ...

    STTR Phase II 2018 Department of Energy
  8. IP Access Gateway

    SBC: Telluric Labs LLC            Topic: 24a

    This proposal aims to develop a back-end (BE) board, the “IP Access Gateway” (IPAG), in a commercial PCIe form factor, and build a COTS-based Continuous-Flow Trigger and Data Acquisition system (CF-TDAQ). The system monitors and synchronizes timestamps collected with local timing, and performs the event building of the data chunks from multiple detector sub-systems, front-end (FE) electronics ...

    STTR Phase II 2018 Department of Energy
  9. Electrogenerative Reactors for Process Intensified Cogeneration of Power and Liquid Fuel from Shale Gas (Topic 19, Subtopic a)

    SBC: Bio2Electric, LLC            Topic: 19a

    With the abundance of natural gas and its primary components of methane, ethane and propane, there is the opportunity to convert these light alkanes to higher-value products. The growth in natural gas supply in the U.S. has increased substantially since the mid-2000s due to advances in horizontal drilling and hydraulic fracturing. As petroleum prices are volatile, natural gas resources are progres ...

    STTR Phase I 2018 Department of Energy
  10. A microfluidic ice nucleating particle counter for continuous measurements from small aerial platforms

    SBC: HANDIX SCIENTIFIC Inc.            Topic: 23a

    Quantifying atmospheric aerosol, clouds and precipitation processes are critical needs for understanding and interpreting Earth’s changing energy budget, is a DOE objective, and is of broader benefit to the public. Specifically, the formation of ice in the atmosphere depends on the nature and abundance of ice nucleating particles, and has major implications for precipitation and cloud interactio ...

    STTR Phase I 2018 Department of Energy
US Flag An Official Website of the United States Government