You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Electrogenerative Reactors for Process Intensified Cogeneration of Power and Liquid Fuel from Shale Gas (Topic 19, Subtopic a)

    SBC: Bio2Electric, LLC            Topic: 19a

    With the abundance of natural gas and its primary components of methane, ethane and propane, there is the opportunity to convert these light alkanes to higher-value products. The growth in natural gas supply in the U.S. has increased substantially since the mid-2000s due to advances in horizontal drilling and hydraulic fracturing. As petroleum prices are volatile, natural gas resources are progres ...

    STTR Phase I 2018 Department of Energy
  2. Expanding Access to Electronic Property Modeling in Scintillator Crystal Growth and Development

    SBC: Radiation Monitoring Devices, Inc.            Topic: 03a

    The development of radiation detection materials would benefit with greater access to computational models that relate physical traits seen in manufacture with complex energy transitions occurring in the material that control operating performance. However, the HPC requirements behind these models remain beyond the reach of most businesses involved in this small yet vital field impacting National ...

    STTR Phase I 2018 Department of Energy
  3. Low-cost and Flexible Transparent Electrodes Based on Ag–ZTOF (Zn–Sn–O–F) Amorphous Composites Through Ink-jet Printing

    SBC: HAZEN RESEARCH, INC.            Topic: 09b

    Sn-doped In2O3 (ITO) is the industry standard and most widely used transparent conducting electrode (TCE) because of its good electrical and optical properties. However, ITO has a number of disadvantages: ITO is not a suitable TCE for next-generation, high-efficiency, flexible OLEDs, because of its inappropriate work function, difficulty in creating desired patterns, low stability, delaminantion d ...

    STTR Phase I 2018 Department of Energy
  4. A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers

    SBC: JC Solutions            Topic: 14b

    Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

    STTR Phase I 2018 Department of Energy
  5. High Power Ceramic Disk Lasers with Gradient Doping Made by Direct Ink Writing

    SBC: Radiation Monitoring Devices, Inc.            Topic: 25c

    The power output of the high power lasers used in physics research is limited by the materials available for making the gain media in the laser. Future increases in power will require new and better materials. Operation at high power creates great thermal stresses that can lead to effects such as birefringence, thermal lensing or even physical fracture damage to the host itself. Effective cooling ...

    STTR Phase I 2018 Department of Energy
  6. Supercritical Treatment Technology for Water Purification

    SBC: ENVERGEX LLC            Topic: 20a

    Wastewater from oil and gas production has high total dissolved solids (TDS) and organics and needs to be treated for safe disposal or reuse. Coal-fired power plant discharges and mining effluents share similar high TDS and organic contents. This project targets the development of an energy efficient, and robust supercritical desalination technology to treat hypersaline solutions, destroying organ ...

    STTR Phase I 2018 Department of Energy
  7. A microfluidic ice nucleating particle counter for continuous measurements from small aerial platforms

    SBC: Handix Scientific Inc.            Topic: 23a

    Quantifying atmospheric aerosol, clouds and precipitation processes are critical needs for understanding and interpreting Earth’s changing energy budget, is a DOE objective, and is of broader benefit to the public. Specifically, the formation of ice in the atmosphere depends on the nature and abundance of ice nucleating particles, and has major implications for precipitation and cloud interactio ...

    STTR Phase I 2018 Department of Energy
  8. Low-cost, time-resolved chemical characterization of atmospheric aerosols

    SBC: Aerosol Devices Inc.            Topic: 23b

    Currently the chemical composition of atmospheric particulate matter is measured either by off-line analyses of time-integrated filter samples, or by in-situ instruments requiring near-constant operator oversight. These measurement approaches result in sparse or limited data coverage. Despite the critical role of composition on the health and environmental impacts of particulate matter, there exis ...

    STTR Phase I 2018 Department of Energy
  9. Low-Cost Diagnostic Platform for Rapid Biochemical Detection

    SBC: Triton Systems, Inc.            Topic: DHA17B004

    Triton Systems will develop a novel approach to field-based disease and biochemical diagnostics through innovative use of extremely low cost bioanalytical devices.The proposed platform will provide a low cost, portable, and reliable diagnostic test for on-site use in austere and resource-limited environments.The devices will be highly durable, rugged, and easy to use without user-induced variation ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  10. Circulating Diagnostic Markers of Infectious Disease

    SBC: PATHOVACS INCORPORATED            Topic: CBD18A001

    The focus of this STTR phase I component is on proof-of-concept studies demonstrating applicability of technical approaches for identificationof circulatory diagnostic markers for infectious disease. Therefore, the primary objective of this project is to determine feasibility of one suchtechnical approach called Proteomics-based Expression Library Screening (PELS), for identification of pathogen-d ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government