You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Wireless Passive Nanoparticle based Intelligent Sensor System for Extreme Environments

    SBC: Sensatek Propulsion Technology, Inc.            Topic: T13

    Sensatek Propulsion Technology, Inc. proposes to demonstrate the feasibility of a wireless, passive, nanoparticle-based sensor system. The sensor in its current form can be used to measure real time temperatures and pressures wirelessly without the need of an external energy source. It should be noted that the same sensing principle can be used for strain monitoring as well. It comprises of a micr ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. Wide Bandgap Nanostructured Space Photovoltaics

    SBC: Firefly Technologies            Topic: T3

    Firefly, in collaboration with Rochester Institute of Technology, proposes an STTR program for the development of a wide-bandgap GaP-based space solar cell capable of efficient operation at temperatures above 300oC. Efficiency enhancement will be achieved by the introduction of InGaP quantum wells within the active region of the wide-gap base material. The introduction of these nanoscale features ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  3. Volume Sensor for Flexible Fluid Reservoirs in Microgravity

    SBC: CREARE LLC            Topic: T6

    The Advanced Space Suit carries consumable cooling water maintained at ambient pressure within a soft-walled, flexible reservoir. To ensure uninterrupted thermal control it is critical to monitor the volume of water remaining, but no known sensor is suitable for this task. Existing measurement techniques are unacceptably sensitive to the motion and varying geometry of the reservoir in microgravity ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  4. Validated Engineering Tools for Thin-Ply Composites

    SBC: Opterus Research and Development, Inc.            Topic: T12

    Opterus Research and Development, Inc. proposes to develop and validate multi-scale thin-ply High Strain Composites (HSCs) constitutive modeling tools for incorporation into commercial finite element analysis codes. The constitutive models will capture the time-temperature-load-deformation viscoelastic characteristics common to HSCs as well as the yielding or permanent deformation associated with ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  5. Unified In-Space Propulsion Framework for Prediction of Plume-Induced Spacecraft Environments

    SBC: CFD Research Corporation            Topic: T102

    Chemical contamination of spacecraft components as well as thermal and force loading from firing liquid propellant thrusters are critical concerns for in-space propulsion applications. Gas molecular contamination and liquid droplet deposition due to incomplete combustion threaten to damage surface materials, sensitive instruments and optical sensors, and poses major risks for mission success. Liqu ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  6. Ultra-Miniaturized Star Tracker for Small Satellite Attitude Control

    SBC: CREARE LLC            Topic: T801

    Creare and Virginia Polytechnic Institute and State University propose to design, develop, test, and deliver an ultra compact star tracker specifically intended for small satellites such as the CubeSat platform. Our design is based on proprietary "folded optics" technology previously developed by our partner for use in military and commercial optical applications that require a compact footprint ...

    STTR Phase I 2013 National Aeronautics and Space Administration
  7. uG-LilyPond- Floating Plant Pond for Microgravity

    SBC: Space Lab Technologies, LLC            Topic: T7

    Regenerative space life support will undoubtedly require food production, to recover nutrients and close the carbon loop in a spacecraft habitat. Aquatic plants have enormous potential for edible biomass production but have been little studied as potential food crops for space applications. The proposed μG-LilyPond™ is an autonomous environmentally controlled floating plant cultivation system ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  8. Transient Acoustic Environment Prediction Tool for Launch Vehicles in Motion During Early Lift-Off

    SBC: CFD Research Corporation            Topic: T1

    Launch vehicles experience extreme acoustic loads dominated by rocket plume interactions with ground structures during liftoff, which can produce damaging vibro-acoustic loads on the vehicle and payloads if not properly understood and mitigated against. Existing capabilities for modeling turbulent plume physics are too dissipative to accurately resolve the acoustic propagation and detailed vehicle ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  9. Thin Film Lithium Niobate Microring Modulators for Analog Photonics

    SBC: PARTOW Technologies LLC            Topic: T802

    Lithium niobate (LiNbO3) has been long regarded as the most attractive material for electro-optic modulation for high-performance optical communication systems of up to 100 GHz, as well as for its superior second-order optical non-linearity. The weakly confined LiNbO3 waveguides formed by diffusion or implantation of dopants do not lend themselves to high-level chip integration. One key novel tech ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  10. Thermal Stir Welding of High Strength and High Temperature Alloys for Aerospace Applications

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T901

    The Keystone and MSU team propose to build on the successful feasibility demonstration conducted during Phase I to complete the development of solid-state joining of high strength and temperature alloys utilizing the Thermal Stir Welding process. The focus alloy for this project is Haynes 230; the alloy of choice typically utilized in rocket engine nozzel skirts. This class of alloy is difficult t ...

    STTR Phase II 2010 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government