Award Data

SOF combat swimmers have a need for the continuous monitoring of each others relative position while diving and for the capability of being able to communicate with each other to help establish a common operational picture (COP).The C3SA system was previously developed under SBIR Topic SOCOM08-001 thru the receipt of both Phase I and Phase II SBIR awards.The C3SA established a stand-alone network ...

The objective in this project is to implement and validate a probabilistic qualification framework that will enable additive manufacturing (AM) materials and part qualification through the use of a data-driven predictive model within a statistical framework. Senvol seeks to develop and validate a data-driven ICME probabilistic framework for assisting qualification of AM materials and parts. Phase ...

Field programmable gate arrays (FPGAs) are becoming increasingly critical components in advanced electronic systems. However, limited research has been applied to identifying critical vulnerabilities that could be present in the designs deployed on these FPGAs. The risk is further increased by the use of 3rd party intellectual property in many designs. GrammaTech is proposing to develop a Trust ve ...

Superconductor digital circuits, operating at very high clock speed, can directly process wideband digitized radio frequency (RF) signals. By integrating such digital processing circuitry together with superconductor analog-to-digital converters (ADCs), we propose to develop the next generation digital-RF receivers. Leveraging the recent development of multiple superconductor ADCs on the same chip ...

The US Navy has identified refractory high entropy alloys (RHEAs) and metal additive manufacturing (AM) as enabling technologies to meet performance and sustainability targets for shipboard and aircraft systems. Key challenges include designing RHEAs and optimizing metal AM to achieve desired material properties for Navy propulsion applications. Developing materials and processes via traditional e ...

xß-Ga2O3 has emerged as a potentially disruptive semiconductor with a predicted breakdown field of ~8 MV/cm which is more than twice the breakdown field for the incumbent wide bandgap semiconductors GaN and SiC. The availability of ß-Ga2O3 bulk substrates sets this material apart from other wide bandgap materials for power electronic applications. However, the challenge is to find suitable epita ...

The Candent Technologies “Reduced Cavitation, High Efficiency Outboard Propulsor for Small Planing Craft” Phase II program is structured to develop an advanced waterjet propulsor for the Combat Rubber Raiding Craft (CRRC). This new axial flow waterjet propulsion system is designed as a “bolt on” assembly that replaces the lower unit of the existing MFE 55 outboard motor. This new propulsio ...

The proposed program will develop dielectrics for dc superconducting power transmission cables that are cooled with cryogenic helium gas. The Dielectrics will be sealed again helium gas penetration and allow for an operating voltage of 12 kV in a pressure of 2 MPa at 50 K. The dielectrics will be designed for use with all helium facing components of power transmission systems based on CORC cables. ...

This project will develop tunable notch filter for the mitigation of co-site interference and jamming sources. The novel filter technology explored in the Phase I program has displayed excellent potential to provide wide tuning capability, low out-of-band insertion losses, deep notch depths, compact form factors and low power consumption. Furthermore, by using novel MEMS tuning membranes, high fil ...

HYPRES, in collaboration with University of Massachusetts, proposes an energy-efficient hybrid-temperature-heterogeneous-technology (HTHT) digital data link for interfacing 4K superconductor electronics with room-temperature electronics. Comprising several stages of cryogenic SiGe amplifiers at different temperatures, followed by equalization techniques, this data link will be designed to minimize ...