You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Multi-Functional Nanotube-Based Sensor Array for Detecting Blood Coagulation Defects

    SBC: Innosense Llc            Topic: DHA19A001

    Defense Health Agency (DHA) is seeking a multi-functional diagnostic to determine blood coagulopathy in real time at point-of-care (POC). Blood coagulopathy, resulting in uncontrolled bleeding, is implicated in 80% of operating room deaths and 50% of trau

    STTR Phase I 2019 Department of DefenseDefense Health Program
  2. POC Blood Coagulopathy Monitor

    SBC: CFD Research Corporation            Topic: DHA19A001

    Traumatic injuries account for 30% of all life years lost in the US and is the leading cause of death for people under 46 years of age. Uncontrolled bleeding or hemorrhage constitute 30-40% of trauma related deaths and are considered to be a major cause o

    STTR Phase I 2019 Department of DefenseDefense Health Program
  3. Advanced Command and Control Architectures for Autonomous Sensing

    SBC: TOYON RESEARCH CORPORATION            Topic: N18BT030

    We propose to develop an innovative open architecture for the semi-autonomous command and control (C2) of teaming Unmanned Aircraft Systems (UAS). The proposed architecture, based upon Toyon’s Decentralized Asset Management system, supports both centralized and decentralized fusion and control autonomy solutions as well as hybrids approaches. Leveraging STANAG-4586, TCP/IP, UPD, Google™ protob ...

    STTR Phase I 2019 Department of DefenseNavy
  4. Carbon Nanotube-Based Heater Coatings for Processing of Thermosetting and Thermoplastic Composites

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: N18BT031

    For this research program, Mainstream will collaborate with Colorado State University (CSU) to develop a nanostructured heater capable of curing aerospace grade composites out-of-autoclave (OOA). The use of autoclaves is the primary cost driver in composite manufacturing due to size limitations, long processing times, and inefficient energy usage. Therefore, the Navy is looking to develop a nanost ...

    STTR Phase I 2019 Department of DefenseNavy
  5. Blending Classical Model-Based Target Classification and Identification Approaches with Data-Driven Artificial Intelligence

    SBC: TOYON RESEARCH CORPORATION            Topic: N18BT033

    Toyon Research Corp. and the University of California propose to develop innovative algorithms to perform automatic target recognition (ATR), localization, and classification of maritime and land targets in EO/IR, LiDAR, and SAR imagery. The proposed algorithms are based on recent developments made at the University of California, which outline a strong mathematical framework for naturally blendin ...

    STTR Phase I 2019 Department of DefenseNavy
  6. Optimized Higher Power Microwave Sources

    SBC: Epirus, Inc.            Topic: N19AT001

    Epirus presents a high powered microwave source that leverages ultra high power density solid state materials, called Leonidas, to meet all of the government’s objectives for the vehicle stop and vessel stop mission. The Leonidas unit has already achieved over 10 kW of effective radiated power (ERP) in laboratory tests using software definable solid state technology and we show how this scales t ...

    STTR Phase I 2019 Department of DefenseNavy
  7. Innovations in Designing Damage Tolerant Rotorcraft Components by Interface Tailoring

    SBC: Global Engineering and Materials, Inc.            Topic: N19AT003

    Global Engineering and Materials, Inc. (GEM) along with its team member, the University of Wisconsin-Madison (UW-M), propose to develop printed polymer reinforcement via additive manufacturing to provide patterns at the interlaminar regions in traditional prepreg composites with the goal of improving their interlaminar properties under mixed mode loading. Two key components will be performed under ...

    STTR Phase I 2019 Department of DefenseNavy
  8. Process to Mitigate Catastrophic Optical Damage to Quantum Cascade Lasers

    SBC: IRGLARE, LLC            Topic: N19AT004

    The development of a catastrophic optical damage model for quantum cascade lasers describing instantaneous laser damage at high optical power levels is proposed. The model will be validated by comparison to experimental data. Based on obtained results, changes to laser design and laser fabrication resulting in an increased damage threshold will be implemented. The work will ultimately result into ...

    STTR Phase I 2019 Department of DefenseNavy
  9. Quantum Cascade Laser Array with Integral Wavelength Beam Combining

    SBC: Mirios, Inc.            Topic: N19AT005

    Mirios Inc., in collaboration with UCSB and NRL, proposes to construct a high-brightness MWIR (~4.5-4.9 µm) light source, consisting of a single silicon chip with an array of Quantum Cascade Lasers which are fully-integrated with wavelength beam combiners.

    STTR Phase I 2019 Department of DefenseNavy
  10. Atomic Triaxial Magnetometer

    SBC: Twinleaf LLC            Topic: N19AT006

    This project develops an atomically-referenced vector magnetometer with a goal of substantial improvements in the drift of the sensor relative to existing solid state sensors such as fluxgate magnetometers.

    STTR Phase I 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government