You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Recovery Act- Scale-up of the Nanomanufacturing of Coated Powders for Superior Battery Electrode Materials
SBC: ALD NANOSOLUTIONS, INC Topic: 09bThere is significant opportunity for energy efficiency improvements in the industrial and manufacturing sectors in the U.S., both from the production and consumption perspective. Higher energy density battery materials will play a role in both, through improved storage of electricity from renewable sources, the enabling of electric vehicles, and through the development of longer lasting, higher po ...
STTR Phase I 2010 Department of Energy -
Mobile Ice Nucleus Counter
SBC: Droplet Measurement Technologies, LLC Topic: 32cIce crystals can form spontaneously from the freezing of water droplets at temperatures colder than -38
STTR Phase I 2010 Department of Energy -
Ultra Low-Power and Embeddable Blade-Condition Monitor
SBC: Extreme Diagnostics, Inc. Topic: 07cThis SBIR/STTR project delivers an ultra-low power structural health monitoring (SHM) system that uses autonomous, wirelessly embedded sensors to monitor and assess structural integrity in wind turbine blades. EASE features impedance-based active SHM, which is highly sensitive to damage like cracks, delimitations, mass variations, fastener failures and stiffness changes. Blades are the only wind t ...
STTR Phase I 2010 Department of Energy -
Recovery Act- Development of a Fiber Based Source of High Average Power Ultrafast Pulses at 2.0 Microns
SBC: Kapteyn-Murnane Laboratories, Inc. Topic: 04dBright coherent light sources in the soft x-ray region of the spectrum are useful for a variety of applications of interest to DOE in the basic sciences, nanoscience and biology, and for technological applications. At Free-Electron Laser Facilities, peak power output of the x-ray pulses is enhanced by using a mid-infrared laser pulse instead of a near-infrared pulse. The current front end for mid- ...
STTR Phase II 2010 Department of Energy -
Nickel-Based Amorphous Metal Membranes for Water Gas Shift Reactors
SBC: MAINSTREAM ENGINEERING CORP Topic: 10cHydrogen produced today from coal, natural gas, or biomass must be separated and purified outside the reactors using pressure swing absorption (PSA), a process that requires significant additional space and energy. Placing hydrogen-permeable membranes inside the reactors themselves would allow hydrogen to diffuse out, thereby reducing the cost of hydrogen production. In this Phase I effort, Mainst ...
STTR Phase I 2010 Department of Energy -
Anti-Breakdown Coatings for High-Gradient Accelerator Structures
SBC: Omega-P, Inc. Topic: 39aDevelopment of accelerator structures that can sustain acceleration gradients up to 150 MeV/m are required in order to build a future multi-TeV collider with an energy reach beyond present or planned electron-positron colliders. Limitations for operation with high acceleration gradient arise from RF breakdown. High-melting-point insulated coatings are to be applied first to test samples and to p ...
STTR Phase II 2010 Department of Energy -
Low Cost, Scalable Manufacturing of Microlens Engineered Substrates (MLES) for Enhanced Light Extraction in OLED Devices
SBC: Sinmat Inc Topic: 09bSolid state lighting is being promoted as the ultimate lamps of future. Though the internal quantum efficiency of OLED devices is almost 100%, external efficiency is a mere 36% mainly because of poor light out-coupling (~40%) from the device. Improvement in light out-coupling to >70% and further reducing the manufacturing cost will rapidly accelerate the commercialization of the OLED technology. T ...
STTR Phase I 2010 Department of Energy -
Defect Free, Ultra-Rapid Thinning/Polishing of Diamond Crystal Radiator Targets (20??m) for Highly Linearly Polarized Photon Beams
SBC: Sinmat Inc Topic: 46eThe fabrication of high-quality ultra thin (~20 micron) diamond crystals targets for 9 GeV highly polarized photon beams is an outstanding challenge. Current state of the art polishing/thinning techniques are not successful in thinning single crystal diamond to such dimension because of its extreme hardness and chemical inertness. These techniques create significant stresses surface and sub-surfac ...
STTR Phase I 2010 Department of Energy -
Novel Module Architecture Development for Increased Reliability and Reduced Costs
SBC: Creative Light Source, Inc Topic: 07aStatement of Problem: The US DOE has set a goal to advance photovoltaics (PV) technology to reach installed costs of less than $1/Watt. This requires module costs below $0.50/ Watt. Thin film PV provides the lowest documented production cost per watt ($0.67) of any PV technology. Module reliability has a direct impact on the levalized cost of energy (LCOE), or the cost of the energy produced by ...
STTR Phase I 2013 Department of Energy -
Practical Fiber Delivered Laser Ignition Systems for Vehicles
SBC: Seaforth LLC Topic: 08bImproved ignition methods are needed for advanced vehicle combustion systems, in particular those that allow reliable ignition of lean mixtures in gasoline engines at elevated pressures. Laser ignition is a candidate technology having the potential to address these needs. However, despite more than 40 years of laser ignition research, the technology is not yet in commercial use. A critical proble ...
STTR Phase I 2013 Department of Energy