You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers
SBC: JC Solutions Topic: 14bTall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...
STTR Phase I 2018 Department of Energy -
Additive Manufacture of Refractory Metal Propulsion Components
SBC: GEOPLASMA LLC Topic: T9Niobium alloy (C-103) reaction control system (RCS) chambers have been used on numerous NASA programs. However at elevated temperatures, the strength of C-103 decreases significantly. Higher strength niobium alloys have been developed, but these alloys lack the formability of C-103. Recently, Additive Manufacture (AM) of niobium and C-103 has been demonstrated using powder bed electron beam me ...
STTR Phase I 2018 National Aeronautics and Space Administration -
Advanced Simulation Framework for Design and Analysis of Space Propulsion Systems
SBC: STREAMLINE NUMERICS, INC. Topic: T901The innovation proposed here is a high-performance, high-fidelity framework in the computational fluid dynamics (CFD) code called Loci-STREAM to enable accurate, fast and robust simulations of unsteady multiphase flows such as combustion involving liquid-gas phases in liquid rocket injectors and solid-gas phases in solid rocket motors, and cryogenic cavitation in delivery systems of liquid rocket ...
STTR Phase II 2010 National Aeronautics and Space Administration -
Advanced Unsteady Turbulent Combustion Simulation Capability for Space Propulsion Systems
SBC: STREAMLINE NUMERICS, INC. Topic: T901The innovation proposed here is a high performance, high fidelity simulation capability to enable accurate, fast and robust simulation of unsteady turbulent, reacting flows involving cryogenic propellants (such as LOX/LH2 and LOX/LCH4). The key features of this proposed capability are: (a) Hybrid RANS-LES (HRLES) methodology, and (b) flamelet modeling for turbulent combustion incorporated in a pr ...
STTR Phase I 2010 National Aeronautics and Space Administration -
Air Vehicle Gust Response analysis for Conceptual Design
SBC: RESEARCH IN FLIGHT LLC Topic: T15Research in Flight (RIF) and Auburn University are offering the development of an advanced, robust tool and methodology that allows the simulation and modeling of gust and wake vortex encounters for Distributed Electric Propulsion (DEP) enabled Urban Air Mobility (UAM) vehicle concepts. DEP enabled UAM concepts offer the potential for large performance improvements by exploiting favorable synergie ...
STTR Phase I 2019 National Aeronautics and Space Administration -
A Mesh Free Framework for Mechanical Simulations of Microstructure Data Files
SBC: CFD RESEARCH CORPORATION Topic: 07aThe Exascale Computing Project is tasked to develop the next generation of high performance computing systems capable of computing at 50 to 100 times faster than current HPC systems. Computing at this extreme-scale will significantly enhance the value of materials modeling and simulation to basic materials research and engineering In particular, computing at the extreme scale will enable a higher ...
STTR Phase I 2019 Department of Energy -
A microfluidic ice nucleating particle counter for continuous measurements from small aerial platforms
SBC: Handix Scientific Inc. Topic: 23aQuantifying atmospheric aerosol, clouds and precipitation processes are critical needs for understanding and interpreting Earth’s changing energy budget, is a DOE objective, and is of broader benefit to the public. Specifically, the formation of ice in the atmosphere depends on the nature and abundance of ice nucleating particles, and has major implications for precipitation and cloud interactio ...
STTR Phase I 2018 Department of Energy -
Amplifiers for High Repetition Rate Diode-Pumped Ultra-Intense Femtosecond Lasers
SBC: XUV LASERS, INC. Topic: 25cThe problem being addressed is the development of high intensity ultrashort pulse lasers, in recognition that today’s ultra-high intensity lasers are limited to repetition rates of < 10 Hz. Technical solutions are sought to enable the generation of high energy (joule-level) laser pulses that can be focused to highly relativistic intensity at high repetition rates (100-1000 Hz). The proposed proj ...
STTR Phase I 2019 Department of Energy -
A Multi-physics Analysis Capability for Engine Materials
SBC: Sunergolab Inc. Topic: 03bComputer-aided Engineering software that apply the Finite Element Method to perform a multi-physics analysis have received widespread acceptance for traditional macro-scale material systems. Challenges persist in the modeling of complex coupled processes in environmental/thermal barrier coatings (E/TBCs) used to protect substrate material against the corrosive environment in the hot section parts ...
STTR Phase I 2019 Department of Energy -
An Additive Manufacturing Technique for the Production of Electronic Circuits
SBC: Morningbird Media Corporation Topic: T12Under the support of a FY 2016 NASA Phase I Small Business Technology Transfer (STTR) contract (NASA contract number NNX16CM40P), Morningbird Media Corporation in collaboration with Alabama A&M University Research, Innovation in Science and Engineering (AAMU-RISE) Foundation, has devised a unique method for an additive manufacturing technique for the direct 3D printing of functional electronics. T ...
STTR Phase II 2018 National Aeronautics and Space Administration